Vlastimil Slinták
d30d6e6827
Fix PCB edge discontinuity error
2025-12-15 17:27:22 +01:00
Vlastimil Slinták
08c5c439c9
Fixed GNSS TX/RX mixup and several ERC issues
2025-12-08 22:33:57 +01:00
Vlastimil Slinták
2b1a109265
Add PPTC fuse to the battery
2025-12-01 14:19:10 +01:00
Vlastimil Slinták
1045f31de5
Minor tweaks and layout fixes
2025-11-27 14:40:53 +01:00
Vlastimil Slinták
00075110c7
Add GNSS chip antenna ANT8010LL05R1516A
2025-11-26 19:36:45 +01:00
Vlastimil Slinták
8072eb3c63
Add LG77L GNSS module to the schema
2025-11-26 19:36:45 +01:00
Vlastimil Slinták
02844ab23f
Add symbol, footprint, and 3D model of the LG77L GNSS module
2025-11-26 19:36:45 +01:00
Vlastimil Slinták
49254d578c
Added TPS565242 symbol
2025-11-25 14:54:23 +01:00
Wojciech Kaczmarski
2cc6e47803
updated RF attenuator symbol
2025-11-25 14:54:23 +01:00
Vlastimil Slinták
7be6a7a659
Added missing courtyard to the SLO0520H1R0 footprint
2025-11-25 14:54:23 +01:00
Vlastimil Slinták
648ac12a01
Fixed BQ25792 foorptint based on the manufacturer's specs
2025-11-25 14:54:23 +01:00
Vlastimil Slinták
c4ccd7cfb9
Changed USB charger inductor to smaller version
...
Original inductor recommended by manufacturer was for up to 14A (I_sat).
LinHT doesn't need currents like this, so smaller inductor for 8 A is used.
This will save some space as a new component is smaller in every dimension.
2025-11-25 14:54:23 +01:00
Vlastimil Slinták
abd2511511
Updated Coilcraft 0908SQ footprint and added 3D model
2025-11-25 14:54:23 +01:00
Vlastimil Slinták
be245ff411
Footprint and 3D model of TDK's SPM6530 inductor
2025-11-25 14:54:23 +01:00
Vlastimil Slinták
bd0655d921
Added symbol, footprint and 3D model of BQ25792 IC
2025-11-25 14:54:23 +01:00
Vlastimil Slinták
438c5bfef5
Added two series attenuators PE4312 to the RF input path
2025-11-25 14:54:23 +01:00
Vlastimil Slinták
5b64c6ddd0
Added GRF5604 symbol, footprint and 3D model
2025-11-25 14:54:23 +01:00
Vlastimil Slinták
4e47e85ccf
Added SKY13330-397LF symbol, footprint and 3D model
2025-11-25 14:54:23 +01:00
Vlastimil Slinták
cc714a7ebe
Fixed board edge and position of 3.5 mm jack
...
The 3.5 mm jack footprint from the standard KiCAD library had to be
modified. The PCB edge was moved 0.85 mm outward to match the C62
connector and PCB layout.
2025-07-28 16:58:25 +03:00
Vlastimil Slinták
f18ea484e8
Changed MCLK audio signal for the 12.288 MHz oscillator
2025-07-28 16:58:25 +03:00
Vlastimil Slinták
7465b693e3
Fixed footprint of the battery connector
...
Mounting holes were inside copper pad.
2025-07-28 16:58:25 +03:00
Vlastimil Slinták
e367ab4c4b
Removed copper rectangle from the SMA footprint
2025-07-28 16:58:25 +03:00
Vlastimil Slinták
a9584d65b5
Fixed footprint of the MCM-iMX93
...
The pads had "paste" enabled but with negative offset making the paste
layer zero size. Real "paste" was defined as a custom polygon.
This commit fixes issues, leaving paste layer as per manufacturer's
specification.
2025-07-28 16:58:25 +03:00
Vlastimil Slinták
f183342342
Fixed 3D model path of the QFN50P500 footprint
2025-07-28 16:58:25 +03:00
Vlastimil Slinták
49f5e1c6f7
Fixed majority of ERC warnings and errors
2025-07-28 16:58:25 +03:00
Vlastimil Slinták
3f6bbc1195
Fixed MCM-iMX93 symbol, added pads G25-G28
2025-07-28 16:58:25 +03:00
Vlastimil Slinták
50ef9b7905
Added silkscreen and courtyard to the TSLP footprint
2025-07-28 16:58:25 +03:00
Vlastimil Slinták
adb29cc6e9
New footprint for the 20 pin display connector
2025-07-23 12:36:08 +03:00
Vlastimil Slinták
9bb5b0f9b7
Added footprint and symbol for the on/off switch with a potentiometer
2025-07-23 12:36:08 +03:00
Vlastimil Slinták
6c4e5c8158
Added footprint of the SMA connector
...
The SMA connector is the original one used in Retevis C62. Dimensions
are based on measurements of the real part.
2025-07-23 12:36:08 +03:00
Wojciech Kaczmarski
b62ca16bca
update
...
- brought some order to page 1
- routed on/off signals
-added SoM pin #10
- rendered PDF
2025-07-20 21:03:05 +03:00
Vlastimil Slinták
318fd589a5
Added footprint and 3D model for the BT-003 battery connector
2025-07-19 13:00:08 +03:00
Vlastimil Slinták
db21280711
Added modified footprint for the PJ-204 audio 2.5 mm jack
...
This alternative footprint does not have three mounting mechanical
holes. This will make the jack body 0.5 mm higher, making it better
aligned with the center of the 3.5 mm jack.
2025-07-17 21:25:07 +02:00
Vlastimil Slinták
6308590bad
Added footprint and 3D model for the PJ-204 audio 2.5 mm jack
2025-07-16 13:34:56 +02:00
Vlastimil Slinták
a1a40c5cc9
Fixed pinout for the SoM
...
* Added missing pin definitions in MCM-iMX93 symbol
* Added information about the keyboard wiring
* Assigned all signals to pins in the SoM
2025-07-15 17:15:47 +02:00
Vlastimil Slinták
862a3383a0
Added footprint and positions for the side keys (BTN2/PTT)
...
* Pad footprint on the original PCB (Retevis C62) is 1.7x2.2 mm.
* Side keys are mounted on a separate PCB soldered via 5 pads on
the main PCB.
2025-07-15 17:15:47 +02:00
Vlastimil Slinták
97ef9cf510
Added footprint and 3D model for the FPC connector
...
* JUSHUO AFC01-S16FCA-00
* LCSC C262665
2025-07-15 17:15:47 +02:00
Vlastimil Slinták
77d46b0506
Changed all EOLs from Windows (CRLF) to Unix style (LF)
...
Unix style end-of-lines is standard in KiCAD world:
https://klc.kicad.org/general/g1/g1.7.html
2025-07-14 16:50:00 +02:00
Vlastimil Slinták
92b031343d
Added 3D model of the SRN6028 inductor series
2025-07-14 12:31:58 +02:00
Vlastimil Slinták
4e058db846
Fixed MCM-iMX93 footprint per manufacturer design
...
* Added G1-G24 pads to the symbol, assigned GND signal
* Changed footprint per manufacturers specs
* Renamed the footprint from QFN-140 to MCM-iMX93
https://www.compulab.com/products/computer-on-modules/mcm-imx93-nxp-i-mx-93-som-smd-system-on-module/#devres
2025-07-14 12:31:58 +02:00
Vlastimil Slinták
ea5a6baa7c
Added 3D models for USB-C and QFN-140 footprints
2025-07-14 12:31:58 +02:00
Vlastimil Slinták
ab37003d16
Fixed wrong pin names JPn->JDn in the WM8960 symbol
2025-07-13 10:12:57 +02:00
Vlastimil Slinták
581e4a612f
Added the audio input/output using WM8960
...
* Replaced TAC5111 with WM8960.
* Connected internal speaker and headphone output.
* Added JACK_DETECK signal
* Connected 2.5mm jack to the WM8960.
* Added SAI3_MCLK to the SoM symbol.
2025-07-13 10:12:57 +02:00
Vlastimil Slinták
5b3792d818
Added a new project library with the WM8960 audio codec
2025-07-10 22:12:59 +02:00
Wojciech Kaczmarski
abd7fbc6b2
WIP SOM update
2025-07-07 16:22:57 +02:00
Wojciech Kaczmarski
e0c8f223c0
WIP SOM update
2025-07-06 21:40:13 +02:00
