arne/openwrt
1
0
Fork 0
forked from mirror/openwrt
Code Pull requests Activity
openwrt/target/linux/sunxi/image/cortexa7.mk
Zoltan HERPAI 283c45f087 sunxi: add PineCube support 
PineCube is a low-powered, open source IP camera with OV5640.

Specifications:
SoC:      Allwinner S3 Cortex-A7
DRAM:     128MB DDR3 integrated
Power:    microUSB
Storage:  microSD / 16MByte SPI flash
USB:      1x 2.0
Network:  10/100Mbit ethernet with passive PoE (4-18V)
Wireless: RTL8189ES (unsupported)
Debug:    Serial UART on 26-pin GPIO
Features: 5 mpx OV5640 camera, microphone, IR LEDs

Flashing instructions:
Standard sunxi SD card installation procedure - copy image to SD card,
insert into SD card slot on the device and boot.

Link: https://github.com/openwrt/openwrt/pull/22422
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2026-03-21 16:43:47 +01:00

325 lines
9 KiB
Makefile
Raw Blame History

# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2013-2019 OpenWrt.org
# Copyright (C) 2016 Yousong Zhou
KERNEL_LOADADDR:=0x40008000
define Device/cubietech_cubieboard2
$(call Device/FitImageGzip)
DEVICE_VENDOR := Cubietech
DEVICE_MODEL := Cubieboard2
DEVICE_PACKAGES:=kmod-ata-sunxi kmod-sun4i-emac kmod-rtc-sunxi
SOC := sun7i-a20
endef
TARGET_DEVICES += cubietech_cubieboard2
define Device/cubietech_cubietruck
$(call Device/FitImageGzip)
DEVICE_VENDOR := Cubietech
DEVICE_MODEL := Cubietruck
DEVICE_PACKAGES:=kmod-ata-sunxi kmod-rtc-sunxi kmod-brcmfmac
SOC := sun7i-a20
endef
TARGET_DEVICES += cubietech_cubietruck
define Device/friendlyarm_nanopi-m1-plus
$(call Device/FitImageGzip)
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi M1 Plus
DEVICE_PACKAGES:=kmod-leds-gpio kmod-brcmfmac \
cypress-firmware-43430-sdio wpad-basic-mbedtls
SOC := sun8i-h3
endef
TARGET_DEVICES += friendlyarm_nanopi-m1-plus
define Device/friendlyarm_nanopi-neo
$(call Device/FitImageGzip)
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi NEO
SOC := sun8i-h3
endef
TARGET_DEVICES += friendlyarm_nanopi-neo
define Device/friendlyarm_nanopi-neo-air
$(call Device/FitImageGzip)
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi NEO Air
DEVICE_PACKAGES := kmod-leds-gpio kmod-brcmfmac \
brcmfmac-firmware-43430a0-sdio wpad-basic-mbedtls
SOC := sun8i-h3
endef
TARGET_DEVICES += friendlyarm_nanopi-neo-air
define Device/friendlyarm_nanopi-r1
$(call Device/FitImageGzip)
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R1
DEVICE_PACKAGES := kmod-usb-net-rtl8152 kmod-leds-gpio \
kmod-brcmfmac cypress-firmware-43430-sdio wpad-basic-mbedtls
SOC := sun8i-h3
endef
TARGET_DEVICES += friendlyarm_nanopi-r1
define Device/friendlyarm_zeropi
$(call Device/FitImageGzip)
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := ZeroPi
DEVICE_PACKAGES := kmod-rtc-sunxi
SOC := sun8i-h3
endef
TARGET_DEVICES += friendlyarm_zeropi
define Device/lamobo_lamobo-r1
$(call Device/FitImageGzip)
DEVICE_VENDOR := Lamobo
DEVICE_MODEL := Lamobo R1
DEVICE_ALT0_VENDOR := Bananapi
DEVICE_ALT0_MODEL := BPi-R1
DEVICE_PACKAGES := kmod-ata-sunxi kmod-rtl8192cu wpad-basic-mbedtls
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
SOC := sun7i-a20
endef
TARGET_DEVICES += lamobo_lamobo-r1
define Device/lemaker_bananapi
$(call Device/FitImageGzip)
DEVICE_VENDOR := LeMaker
DEVICE_MODEL := Banana Pi
DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-ata-sunxi
SOC := sun7i-a20
endef
TARGET_DEVICES += lemaker_bananapi
define Device/pine64_pinecube
$(call Device/FitImageGzip)
DEVICE_VENDOR := Pine64
DEVICE_MODEL := PineCube
SOC := sun8i-s3
SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-pinecube
endef
TARGET_DEVICES += pine64_pinecube
define Device/sinovoip_bpi-m2-berry
$(call Device/FitImageGzip)
DEVICE_VENDOR := Sinovoip
DEVICE_MODEL := Banana Pi M2 Berry
DEVICE_PACKAGES:=kmod-ata-sunxi kmod-brcmfmac \
cypress-firmware-43430-sdio wpad-basic-mbedtls
SUPPORTED_DEVICES += lemaker,bananapi-m2-berry
SOC := sun8i-v40
SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-bananapi-m2-berry
endef
TARGET_DEVICES += sinovoip_bpi-m2-berry
define Device/sinovoip_bpi-m2-ultra
$(call Device/FitImageGzip)
DEVICE_VENDOR := Sinovoip
DEVICE_MODEL := Banana Pi M2 Ultra
DEVICE_PACKAGES:=kmod-ata-sunxi kmod-brcmfmac \
brcmfmac-firmware-43430a0-sdio wpad-basic-mbedtls
SUPPORTED_DEVICES += lemaker,bananapi-m2-ultra
SOC := sun8i-r40
SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-bananapi-m2-ultra
endef
TARGET_DEVICES += sinovoip_bpi-m2-ultra
define Device/lemaker_bananapro
$(call Device/FitImageGzip)
DEVICE_VENDOR := LeMaker
DEVICE_MODEL := Banana Pro
DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-ata-sunxi kmod-brcmfmac \
cypress-firmware-43362-sdio wpad-basic-mbedtls
SOC := sun7i-a20
endef
TARGET_DEVICES += lemaker_bananapro
define Device/licheepi_licheepi-zero-dock
$(call Device/FitImageGzip)
DEVICE_VENDOR := LicheePi
DEVICE_MODEL := Zero with Dock (V3s)
DEVICE_PACKAGES:=kmod-rtc-sunxi
SOC := sun8i-v3s
endef
TARGET_DEVICES += licheepi_licheepi-zero-dock
define Device/linksprite_pcduino3
$(call Device/FitImageGzip)
DEVICE_VENDOR := LinkSprite
DEVICE_MODEL := pcDuino3
DEVICE_PACKAGES:=kmod-sun4i-emac kmod-rtc-sunxi kmod-ata-sunxi kmod-rtl8xxxu \
rtl8188eu-firmware
SOC := sun7i-a20
endef
TARGET_DEVICES += linksprite_pcduino3
define Device/linksprite_pcduino3-nano
$(call Device/FitImageGzip)
DEVICE_VENDOR := LinkSprite
DEVICE_MODEL := pcDuino3 Nano
DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-ata-sunxi
SOC := sun7i-a20
endef
TARGET_DEVICES += linksprite_pcduino3-nano
define Device/mele_m9
$(call Device/FitImageGzip)
DEVICE_VENDOR := Mele
DEVICE_MODEL := M9
DEVICE_PACKAGES:=kmod-sun4i-emac kmod-rtl8192cu
SOC := sun6i-a31
endef
TARGET_DEVICES += mele_m9
define Device/merrii_hummingbird
$(call Device/FitImageGzip)
DEVICE_VENDOR := Merrii
DEVICE_MODEL := Hummingbird
DEVICE_PACKAGES:=kmod-brcmfmac cypress-firmware-43362-sdio wpad-basic-mbedtls
SOC := sun6i-a31
endef
TARGET_DEVICES += merrii_hummingbird
define Device/olimex_a20-olinuxino-lime
$(call Device/FitImageGzip)
DEVICE_VENDOR := Olimex
DEVICE_MODEL := A20-OLinuXino-LIME
DEVICE_PACKAGES:=kmod-ata-sunxi kmod-rtc-sunxi
SOC := sun7i
endef
TARGET_DEVICES += olimex_a20-olinuxino-lime
define Device/olimex_a20-olinuxino-lime2
$(call Device/FitImageGzip)
DEVICE_VENDOR := Olimex
DEVICE_MODEL := A20-OLinuXino-LIME2
DEVICE_PACKAGES:=kmod-ata-sunxi kmod-rtc-sunxi kmod-usb-hid
SOC := sun7i
endef
TARGET_DEVICES += olimex_a20-olinuxino-lime2
define Device/olimex_a20-olinuxino-lime2-emmc
$(call Device/FitImageGzip)
DEVICE_VENDOR := Olimex
DEVICE_MODEL := A20-OLinuXino-LIME2
DEVICE_VARIANT := eMMC
DEVICE_PACKAGES:=kmod-ata-sunxi kmod-rtc-sunxi kmod-usb-hid
SOC := sun7i
endef
TARGET_DEVICES += olimex_a20-olinuxino-lime2-emmc
define Device/olimex_a20-olinuxino-micro
$(call Device/FitImageGzip)
DEVICE_VENDOR := Olimex
DEVICE_MODEL := A20-OLinuXino-MICRO
DEVICE_PACKAGES:=kmod-ata-sunxi kmod-sun4i-emac kmod-rtc-sunxi
SOC := sun7i
endef
TARGET_DEVICES += olimex_a20-olinuxino-micro
define Device/roofull_beelink-x2
$(call Device/FitImageGzip)
DEVICE_VENDOR := Roofull
DEVICE_MODEL := Beelink-X2
DEVICE_PACKAGES:=kmod-leds-gpio kmod-gpio-button-hotplug \
kmod-brcmfmac cypress-firmware-43430-sdio wpad-basic-mbedtls
SOC := sun8i-h3
endef
TARGET_DEVICES += roofull_beelink-x2
define Device/sinovoip_bpi-m2-plus
$(call Device/FitImageGzip)
DEVICE_VENDOR := Sinovoip
DEVICE_MODEL := Banana Pi M2+
DEVICE_PACKAGES:=kmod-leds-gpio kmod-brcmfmac \
brcmfmac-firmware-43430a0-sdio wpad-basic-mbedtls
SOC := sun8i-h3
SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-bananapi-m2-plus
endef
TARGET_DEVICES += sinovoip_bpi-m2-plus
define Device/sinovoip_bpi-m3
$(call Device/FitImageGzip)
DEVICE_VENDOR := Sinovoip
DEVICE_MODEL := Banana Pi M3
DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-leds-gpio kmod-rtc-ac100 \
kmod-brcmfmac cypress-firmware-43430-sdio wpad-basic-mbedtls
SOC := sun8i-a83t
SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-bananapi-m3
endef
TARGET_DEVICES += sinovoip_bpi-m3
define Device/sinovoip_bpi-p2-zero
$(call Device/FitImageGzip)
DEVICE_VENDOR := Sinovoip
DEVICE_MODEL := Banana Pi P2 Zero
DEVICE_PACKAGES:=kmod-leds-gpio kmod-brcmfmac \
cypress-firmware-43430-sdio wpad-basic-mbedtls
SOC := sun8i-h2-plus
SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-bananapi-p2-zero
endef
TARGET_DEVICES += sinovoip_bpi-p2-zero
define Device/xunlong_orangepi-one
$(call Device/FitImageGzip)
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi One
DEVICE_PACKAGES:=kmod-rtc-sunxi
SOC := sun8i-h3
endef
TARGET_DEVICES += xunlong_orangepi-one
define Device/xunlong_orangepi-pc
$(call Device/FitImageGzip)
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi PC
DEVICE_PACKAGES:=kmod-gpio-button-hotplug
SOC := sun8i-h3
endef
TARGET_DEVICES += xunlong_orangepi-pc
define Device/xunlong_orangepi-pc-plus
$(call Device/FitImageGzip)
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi PC Plus
DEVICE_PACKAGES:=kmod-gpio-button-hotplug
SOC := sun8i-h3
endef
TARGET_DEVICES += xunlong_orangepi-pc-plus
define Device/xunlong_orangepi-plus
$(call Device/FitImageGzip)
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi Plus
DEVICE_PACKAGES:=kmod-rtc-sunxi
SOC := sun8i-h3
endef
TARGET_DEVICES += xunlong_orangepi-plus
define Device/xunlong_orangepi-r1
$(call Device/FitImageGzip)
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi R1
DEVICE_PACKAGES:=kmod-usb-net-rtl8152
SOC := sun8i-h2-plus
endef
TARGET_DEVICES += xunlong_orangepi-r1
define Device/xunlong_orangepi-zero
$(call Device/FitImageGzip)
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi Zero
DEVICE_PACKAGES:=kmod-rtc-sunxi
SOC := sun8i-h2-plus
endef
TARGET_DEVICES += xunlong_orangepi-zero
define Device/xunlong_orangepi-2
$(call Device/FitImageGzip)
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi 2
DEVICE_PACKAGES:=kmod-rtc-sunxi
SOC := sun8i-h3
endef
TARGET_DEVICES += xunlong_orangepi-2
View git blame Copy permalink