Joshua O'Leary fbb4aac69b zbt-wd323: add GPIO WDT support ... Watchdog has not been properly configured for this router - the PCB has a hardware watchdog connected to one of the GPIO pin 21 [1] This commit provides this fix [2] Without this fix, the ZBT-WD323 is unusable in OpenWRT because it power cycles every 30 seconds due to the watchdog tripping [1] https://forum.openwrt.org/t/zbt-wd323-router-power-cycles-every-30-seconds/77535/7 [2] https://forum.openwrt.org/t/zbt-wd323-images-unusable-proposed-workaround/162145/5 Signed-off-by: Joshua O'Leary <josh.oleary@mobile-power.co.uk> (cherry picked from commit 008cc836fe)		2023-07-02 15:31:03 +02:00
..
base-files/etc/hotplug.d/ieee80211	ath79: migrate Archer C5 5GHz radio device paths	2022-03-31 18:07:29 +02:00
dts	zbt-wd323: add GPIO WDT support	2023-07-02 15:31:03 +02:00
files	kernel: remove obsolete kernel version switches	2023-05-20 15:19:14 +02:00
generic	ath79: add support for Aruba AP-115	2023-06-23 00:23:48 +02:00
image	ath79: add support for Aruba AP-115	2023-06-23 00:23:48 +02:00
mikrotik	ath79: add support for MikroTik RB951Ui-2HnD	2023-05-16 14:55:18 +02:00
nand	ath79: add Cisco Meraki MR18	2023-05-14 00:08:35 +02:00
patches-5.15	kernel: bump 5.15 to 5.15.119	2023-07-02 10:59:25 +02:00
tiny	treewide: replace wpad-basic-wolfssl default	2023-02-04 02:35:03 +01:00
config-5.15	kernel: mtd: backport SafeLoader parser	2022-10-19 07:07:14 +02:00
Makefile	ath79: switch to 5.15 as default kernel	2022-09-24 13:04:24 +02:00
modules.mk