forked from mirror/openwrt
5d2994a73e
Specifications:
SOC: Qualcomm IPQ5018 (64-bit dual-core ARM Cortex-A53 @ 1.0Ghz)
Flash: SPI NOR 8MB (Winbond W25Q64DW) + NAND 128MB (Winbond W25N01GWZEIG)
Memory: 512MB DDR3L
Standard: 802.11ax/ac/b/g/n
2.4G Frequency: 2.4GHz - 2.484GHz
2.4G Wi-Fi standard: 802.11b/g/n/ax
5G Frequency: 5.150GHz~5.850GHz
5G Wi-Fi Standard: 802.11 a/n/ac/ax
Buttons: 1 * Reset button, press 10 seconds to revert to default setting
2.4G Antenna: 2*2.4GHz/5.8GHz dual band antenna: 4dBi
5G Antenna: 2*5.8G antenna: 4dBi
Data Rate: 2.4GHz: 574Mbps, 5GHz:4800Mbps
Power: PoE 802.3at，DC2.0 12V/2A
Max Power Consumption: < 22W
LED Light: WAN, LAN, tricolor LED(sys-red, 2.4G-green, 5.8G-blue)
BACKUP YOUR STOCK FIRMWARE:
- Put openwrt-*-initramfs-uImage.itb to your
TFTP server and rename it to initramfs.bin
- Enable serial console and enter to u-boot cli
and exec these commands:
```
tftpboot <your_tftp_server_ip>:initramfs.bin
bootm
```
- Once boot completed and you get the openwrt shell
execute below commands:
```
device=ax850
mkdir -p /tmp/fw_backup; cd /tmp/fw_backup
rootfs=$(cat /proc/mtd | grep \"rootfs\" | cut -d: -f1)
rootfs_1=$(cat /proc/mtd | grep \"rootfs_1\" | cut -d: -f1)
dd if=/dev/${rootfs} of=rootfs_${rootfs} bs=1M
dd if=/dev/${rootfs_1} of=rootfs_1_${rootfs_1} bs=1M
cp /sys/firmware/fdt fdt.dtb
md5sum * > md5sum
tar -cvzf /tmp/${device}.tar.gz .
sum=$(md5sum /tmp/${device}.tar.gz | cut -d' ' -f1)
mv /tmp/${device}.tar.gz /tmp/${device}_${sum}.tar.gz
echo "stock fw backup saved to: /tmp/${device}_${sum}.tar.gz"
```
- Upload/save your backup to a safe place.
STOCK FIRMWARE RECOVERY:
- Boot initramfs image
- Upload your backed-up stock fw tarball to the device
using scp or download it from the device using wget.
- Enter device ssh cli or tty and exec:
```
cd /tmp && wget <your_web_server_ip>/${stock_fw_backup}.tar.gz`
tar -xpzf ${stock_fw_backup}.tar.gz
rootfs=$(cat /proc/mtd | grep \"rootfs\" | cut -d: -f1)
rootfs_1=$(cat /proc/mtd | grep \"rootfs_1\" | cut -d: -f1)
ubiformat /dev/${rootfs} -y -f /tmp/rootfs_${rootfs}
ubiformat /dev/${rootfs_1} -y -f /tmp/rootfs_1_${rootfs_1}
reboot
```
INSTALLATION:
1. initramfs method
- Put openwrt-*-initramfs-uImage.itb to your
TFTP server and rename it to initramfs.bin
- Enable serial console and enter to u-boot cli
and exec these commands:
```
tftpboot <your_tftp_server_ip>:initramfs.bin
bootm
```
- Once boot completed and you get the openwrt shell
execute below commands:
```
cd /tmp && wget <your_web_server_ip>/factory.ubi`
export rootfs=$(cat /proc/mtd | grep rootfs | cut -d: -f1)
export rootfs_1=$(cat /proc/mtd | grep rootfs_1 | cut -d: -f1)
ubiformat /dev/${rootfs} -y -f factory.ubi
ubiformat /dev/${rootfs_1} -y -f factory.ubi
reboot
```
2. u-boot factory.ubi image method
- Put factory.ubi to your TFTP server and
enter u-boot cli and exec these commands:
```
tftpboot <your_tftp_server_ip>:factory.ubi
#After downloading is finished:
flash rootfs
flash rootfs_1
reset
```
Signed-off-by: Shubham Vishwakarma <shubhamvis98@fossfrog.in>
Link: https://github.com/openwrt/openwrt/pull/19712
Signed-off-by: Robert Marko <robimarko@gmail.com>
|
||
|---|---|---|
| .. | ||
| apm821xx | ||
| ath79 | ||
| fw_defaults | ||
| fw_loadenv | ||
| fw_printsys | ||
| fw_setsys | ||
| imx_cortexa7 | ||
| imx_cortexa9 | ||
| imx_cortexa53 | ||
| ipq40xx | ||
| ipq806x | ||
| kirkwood | ||
| lantiq | ||
| layerscape | ||
| mediatek_filogic | ||
| mediatek_mt7622 | ||
| mediatek_mt7623 | ||
| mediatek_mt7629 | ||
| mpc85xx | ||
| mvebu | ||
| mxs | ||
| octeon | ||
| oxnas | ||
| pistachio | ||
| qoriq | ||
| qualcommax_ipq50xx | ||
| qualcommax_ipq60xx | ||
| qualcommax_ipq807x | ||
| qualcommbe_ipq95xx | ||
| ramips | ||
| realtek | ||
| rockchip_armv8 | ||
| uboot-envtools.sh | ||