arne/openwrt
1
0
Fork 0
forked from mirror/openwrt
Code Pull requests Activity
openwrt/target/linux/mediatek/dts
History
Christoph Krapp 50d9ca6e5a mediatek: filogic: add support for ASUS RT-AX52 
Hardware
--------
SOC:   MediaTek MT7981b
RAM:   256MB DDR3
FLASH: 128MB SPI-NAND (Winbond W25N01GV)
WIFI:  Mediatek MT7981b DBDC 802.11ax 2.4/5 GHz
ETH:   MediaTek MT7531 Switch
UART:  3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC)

Installation
-----------------------------------------------------------
Vendor-UI Method
-----------------------------------------------------------
1. Download the OpenWrt initramfs.trx image.

2. Connect the PC via LAN to one of the yellow router ports and wait
   until your PC to get a DHCP lease.

3. Browse to http://192.168.50.1

4. If your router is brand new, finish the setup process and log into
   the Web-UI.

5. Navigate to Administration -> Firmware Upgrade and upload the
   downloaded OpenWrt image.

6. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device
   using scp and install using sysupgrade.

   $ sysupgrade -n <path-to-sysupgrade.bin>
-----------------------------------------------------------
TFTP Method
-----------------------------------------------------------
1. Download the OpenWrt initramfs image. Copy the image to a TFTP server
   reachable at 192.168.1.70/24. Rename the image to rtax52.bin.

2. Connect the PC with TFTP server to the RT-AX52.
   Set a static ip on the ethernet interface of your PC.
     (ip address: 192.168.1.70, subnet mask:255.255.255.0)
  Conect to the serial console,
   interrupt the autoboot process by pressing '4' when prompted.

3. Download & Boot the OpenWrt initramfs image.

   $ setenv ipaddr 192.168.1.1
   $ setenv serverip 192.168.1.70
   $ tftpboot 0x46000000 rtax52.bin
   $ bootm 0x46000000

4. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device
   using scp and install using sysupgrade.

   $ sysupgrade -n <path-to-sysupgrade.bin>
---------------------------------------------------------------------------
Revert to stock firmware:
1: Download the rt-ax52 firmware from ASUS official website. Save
   the firmware to tftp server directory and rename to RT-AX52.trx

2: Connect the PC with TFTP server to the RT-AX52.
   Set a static ip on the ethernet interface of your PC.
     (ip address: 192.168.1.70, subnet mask:255.255.255.0)

3: Conect to the serial console,  power on again,  interrupt the
   autoboot process by pressing '4' when prompted.
  $: ubi remove linux
  $: ubi remove jffs2
  $: ubi remove rootfs
  $: ubi remove rootfs_data
  $: ubi create linux 0x45fe000
  $: reset

  Then the dut will reboot,interrupt the autoboot process by
  pressing '2' when prompted.
       2: Load System code then write to Flash via TFTP.
       Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
       $: enter y
  you will see the follow, type enter directly:
       Input device IP (192.168.1.1) ==:
       Input server IP (192.168.1.70) ==:
       Input Linux Kernel filename (RT-AX52.trx) ==:

4: wait for the device run up

Based on support for ASUS RT-AX52 by liudongdongdong7397
and trx image generation by remittor

Signed-off-by: Christoph Krapp <achterin@gmail.com>
2025-04-25 17:03:52 +02:00
..
mt7622-buffalo-wsr-2533dhp2.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-buffalo-wsr-3200ax4s.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-buffalo-wsr.dtsi mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7622-dlink-eagle-pro-ai-ax3200-a1.dtsi linux: replace nvmem-cells with nvmem-layout 2024-12-27 13:34:58 +01:00
mt7622-dlink-eagle-pro-ai-m32-a1.dts mediatek: Add support for D-Link EAGLE PRO AI R32 2024-01-02 21:22:46 +01:00
mt7622-dlink-eagle-pro-ai-r32-a1.dts mediatek: Add support for D-Link EAGLE PRO AI R32 2024-01-02 21:22:46 +01:00
mt7622-elecom-wrc-2533gent.dts treewide: gpio to gpios 2024-06-17 12:57:06 +02:00
mt7622-elecom-wrc-x3200gst3.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-linksys-e8450-ubi.dts mediatek: fix wrong compatible string 2024-10-06 21:56:04 +02:00
mt7622-linksys-e8450.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-linksys-e8450.dtsi mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-netgear-wax206.dts mediatek-mt7622: netgear-wax206 fix wifi leds 2025-01-24 22:23:28 +01:00
mt7622-reyee-ax3200-e5.dts mediatek: Update mt7622-reyee-ax3200-e5.dts 2025-03-15 13:48:00 +01:00
mt7622-rfb1-ubi.dts mediatek: re-enable mt7622-rfb1-ubi with changed partition layout 2024-02-28 09:59:43 +01:00
mt7622-ruijie-rg-ew3200.dtsi mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-ruijie-rg-ew3200gx-pro.dts mediatek: also move &slot0 from dtsi down to board dts 2022-12-07 01:45:14 +00:00
mt7622-smartrg-SDG-841-t6.dts Revert "mediatek: rename PHY LEDs to match upstream bindings" 2025-03-21 00:53:23 +00:00
mt7622-totolink-a8000ru.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7622-ubnt-unifi-6-lr-v1-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v1.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v1.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr-v2-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v2.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v2.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr-v3-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v3.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v3.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-xiaomi-redmi-router-ax6s.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7623a-unielec-u7623-02-emmc-512m.dts mediatek: u7623-02: enable early console also in legacy image 2022-01-31 00:10:38 +00:00
mt7623a-unielec-u7623-02.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7623a-unielec-u7623-02.dtsi mediatek: u7623: fix network switch enumeration 2025-03-16 22:43:02 +01:00
mt7629-iptime-a6004mx.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7629-linksys-ea7500-v3.dts mediatek: Add support for Linksys EA7500 v3 2024-08-15 00:13:20 +02:00
mt7629-netgear-ex6250-v2.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7629-tplink_eap225-v5.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981a-comfast-cf-e393ax.dts mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7981a-edgecore-eap111.dts mediatek: EAP111: add label-mac-device 2024-08-10 18:00:14 +02:00
mt7981a-glinet-gl-x3000-xe3000-common.dtsi mediatek: fix u-boot env layout NVMEM definitions 2024-08-01 17:31:23 +02:00
mt7981a-glinet-gl-x3000.dts mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX) 2024-03-13 20:47:23 +00:00
mt7981a-glinet-gl-xe3000.dts mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX) 2024-03-13 20:47:23 +00:00
mt7981a-ubnt-unifi-6-plus.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7981b-abt-asr3000.dts mediatek: add ABT ASR3000 support 2024-07-21 16:13:06 +02:00
mt7981b-asus-rt-ax52.dts mediatek: filogic: add support for ASUS RT-AX52 2025-04-25 17:03:52 +02:00
mt7981b-cetron-ct3003.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981b-cmcc-a10-stock.dts mediatek: add support for CMCC A10 2025-03-08 15:44:56 +01:00
mt7981b-cmcc-a10-ubootmod.dts mediatek: add support for CMCC A10 2025-03-08 15:44:56 +01:00
mt7981b-cmcc-a10.dtsi mediatek: add support for CMCC A10 2025-03-08 15:44:56 +01:00
mt7981b-cmcc-rax3000m-emmc.dtso mediatek: switch to fitblk for cmcc rax3000m 2024-07-18 13:20:58 +01:00
mt7981b-cmcc-rax3000m-nand.dtso mediatek: switch to fitblk for cmcc rax3000m 2024-07-18 13:20:58 +01:00
mt7981b-cmcc-rax3000m.dts mediatek: switch to fitblk for cmcc rax3000m 2024-07-18 13:20:58 +01:00
mt7981b-confiabits-mt7981.dts mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7981b-cudy-ap3000-v1.dts mediatek: cudy: fixes typo for spi and mtd properties 2025-01-23 10:28:20 +08:00
mt7981b-cudy-ap3000outdoor-v1.dts mediatek: cleanup device tree for cudy devices 2025-01-23 10:32:19 +08:00
mt7981b-cudy-m3000-v1.dts mediatek: cleanup device tree for cudy devices 2025-01-23 10:32:19 +08:00
mt7981b-cudy-re3000-v1.dts mediatek: filogic: PHY LEDs do have an address, gpio-leds don't 2025-03-21 01:19:19 +00:00
mt7981b-cudy-tr3000-v1.dts mediatek: cleanup device tree for cudy devices 2025-01-23 10:32:19 +08:00
mt7981b-cudy-wr3000-v1.dts mediatek: filogic: PHY LEDs do have an address, gpio-leds don't 2025-03-21 01:19:19 +00:00
mt7981b-cudy-wr3000h-v1.dts mediatek: filogic: fix 2.5G phy compatible for WR3000H 2025-01-31 10:46:26 +01:00
mt7981b-cudy-wr3000s-v1.dts mediatek: cleanup device tree for cudy devices 2025-01-23 10:32:19 +08:00
mt7981b-dlink-aquila-pro-ai-m30-a1.dts filogic: Add support for D-Link AQUILA PRO AI M30 2024-03-31 19:01:20 +02:00
mt7981b-gatonetworks-gdsp.dts mediatek: filogic: add support for GatoNetworks GDSP 2024-11-14 04:14:23 +00:00
mt7981b-glinet-gl-mt2500.dts linux: replace u-boot,env with nvmem,layout 2024-12-27 13:34:58 +01:00
mt7981b-glinet-gl-mt3000.dts mediatek: filogic: PHY LEDs do have an address, gpio-leds don't 2025-03-21 01:19:19 +00:00
mt7981b-h3c-magic-nx30-pro.dts mediatek: filogic: convert H3C Magic NX30 Pro to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-huasifei-wh3000.dts mediatek: filogic: add support for Huasifei WH3000 2025-04-06 19:22:09 +02:00
mt7981b-jcg-q30-pro.dts mediatek: filogic: convert JCG Q30 PRO to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-keenetic-kn-3811.dts mediatek/filogic: add Keenetic KN-3811 support 2024-12-08 19:52:35 +01:00
mt7981b-keenetic-kn-3911.dts mediatek/filogic: add Keenetic KN-3911 support 2024-11-28 22:33:21 +01:00
mt7981b-mercusys-mr80x-v3.dts mediatek: filogic: fix mistaken executable bit on dts file 2025-04-25 17:01:47 +02:00
mt7981b-netis-nx31.dts mediatek: add support for netis NX31 2025-04-06 20:14:18 +02:00
mt7981b-nokia-ea0326gmp.dts mediatek: fix wps button for nokia ea0326gmp 2024-06-07 14:19:39 +02:00
mt7981b-nradio-c8-668gl.dts mediatek: filogic: add support for NRadio C8-668GL 2024-12-13 15:29:04 +01:00
mt7981b-openembed-som7981.dts linux: replace nvmem-cells with nvmem-layout 2024-12-27 13:34:58 +01:00
mt7981b-openwrt-one.dts Revert "mediatek: rename PHY LEDs to match upstream bindings" 2025-03-21 00:53:23 +00:00
mt7981b-qihoo-360t7.dts mediatek: filogic: convert Qihoo 360T7 to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-routerich-ax3000-common.dtsi mediatek: Routerich AX3000: add OpenWrt U-Boot layout 2024-11-24 23:41:02 +01:00
mt7981b-routerich-ax3000-ubootmod.dts mediatek: Routerich AX3000: add OpenWrt U-Boot layout 2024-11-24 23:41:02 +01:00
mt7981b-routerich-ax3000-v1.dts mediatek: add support for Routerich AX3000 v1 2025-04-25 17:03:45 +02:00
mt7981b-routerich-ax3000.dts mediatek: Routerich AX3000: add OpenWrt U-Boot layout 2024-11-24 23:41:02 +01:00
mt7981b-tenbay-wr3000k.dts mediatek: filogic: add support for Tenbay WR3000K 2024-12-22 18:45:01 +01:00
mt7981b-unielec-u7981-01-emmc.dts mediatek: fix u-boot env layout NVMEM definitions 2024-08-01 17:31:23 +02:00
mt7981b-unielec-u7981-01-nand.dts linux: replace nvmem-cells with nvmem-layout 2024-12-27 13:34:58 +01:00
mt7981b-unielec-u7981-01.dtsi mediatek: filogic: add Unielec U7981-01 support 2024-03-25 18:14:19 +00:00
mt7981b-wavlink-wl-wn573hx3.dts mediatek: filogic: add support for WAVLINK WL-WN573HX3 2025-04-18 14:00:39 +02:00
mt7981b-wavlink-wl-wn586x3.dts mediatek: filogic: Add support for Wavlink WL-WN586X3 2024-06-09 14:58:25 +02:00
mt7981b-xiaomi-mi-router-ax3000t-ubootmod.dts mediatek: filogic: convert Xiaomi AX3000T to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-xiaomi-mi-router-ax3000t.dts mediatek: fix nmbm configuration mismatch (Xiaomi AX3000t) 2025-02-07 09:04:35 +01:00
mt7981b-xiaomi-mi-router-ax3000t.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-xiaomi-mi-router-common.dtsi mediatek: Xiaomi AX3000t: enable SPI calibration 2025-03-16 19:21:49 +01:00
mt7981b-xiaomi-mi-router-wr30u-stock.dts mediatek: filogic: add support for Xiaomi WR30U 2023-07-27 13:46:16 +02:00
mt7981b-xiaomi-mi-router-wr30u-ubootmod.dts mediatek: filogic: convert Xiaomi WR30U to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-xiaomi-mi-router-wr30u.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-yuncore-ax835.dts mediatek: YunCore AX835: fix voltage regulator 2024-11-03 21:40:53 +01:00
mt7981b-zbtlink-zbt-z8102ax.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7981b-zbtlink-zbt-z8103ax.dts mediatek: add support for Zbtlink ZBT-Z8103AX 2023-12-26 00:02:19 +01:00
mt7981b-zyxel-nwa50ax-pro.dts mediatek: filogic: PHY LEDs do have an address, gpio-leds don't 2025-03-21 01:19:19 +00:00
mt7986a-acelink-ew-7886cax.dts linux: replace nvmem-cells with nvmem-layout 2024-12-27 13:34:58 +01:00
mt7986a-acer-predator-w6.dts mediatek: filogic: PHY LEDs do have an address, gpio-leds don't 2025-03-21 01:19:19 +00:00
mt7986a-acer-predator-w6d.dts mediatek: filogic: PHY LEDs do have an address, gpio-leds don't 2025-03-21 01:19:19 +00:00
mt7986a-acer-vero-w6m.dts mediatek: add support for Acer Predator W6d and Acer Vero W6m 2024-11-23 19:33:42 +01:00
mt7986a-acer-w6-common.dtsi mediatek: improve device tree for Acer Predator Connect W6 2024-11-23 19:33:42 +01:00
mt7986a-asus-rt-ax59u.dts mediatek: apply bootloader work-around for affected ASUS devices 2025-02-15 16:47:57 +00:00
mt7986a-asus-tuf-ax4200.dts Revert "mediatek: rename PHY LEDs to match upstream bindings" 2025-03-21 00:53:23 +00:00
mt7986a-asus-tuf-ax6000.dts mediatek: filogic: PHY LEDs do have an address, gpio-leds don't 2025-03-21 01:19:19 +00:00
mt7986a-bananapi-bpi-r3-mini.dts Revert "mediatek: rename PHY LEDs to match upstream bindings" 2025-03-21 00:53:23 +00:00
mt7986a-dlink-aquila-pro-ai-m60-a1.dts mediatek: D-Link AQUILA PRO AI M60 A1: Fixed phy6 DTS settings 2025-01-12 20:21:46 +01:00
mt7986a-glinet-gl-mt6000.dts mediatek: filogic: PHY LEDs do have an address, gpio-leds don't 2025-03-21 01:19:19 +00:00
mt7986a-jdcloud-re-cp-03.dts mediatek: increase phy assert time for jdcloud re-cp-03 2024-08-08 20:00:12 +02:00
mt7986a-netcore-n60-pro.dts mediatek: filogic: add Netcore N60 Pro support 2025-04-10 22:19:33 +02:00
mt7986a-netcore-n60.dts mediatek: filogic: PHY LEDs do have an address, gpio-leds don't 2025-03-21 01:19:19 +00:00
mt7986a-ruijie-rg-x60-pro.dts mediatek: add support for Ruijie RG-X60 Pro 2024-06-05 17:44:11 +01:00
mt7986a-smartrg-bonanza-peak.dtsi mediatek: filogic: PHY LEDs do have an address, gpio-leds don't 2025-03-21 01:19:19 +00:00
mt7986a-smartrg-SDG-8612.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8614.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8622.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8632.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-tplink-tl-xdr-common.dtsi mediatek: filogic: switch TP-LINK XDR series to fitblk 2024-04-09 15:07:41 +01:00
mt7986a-tplink-tl-xdr4288.dts mediatek: sync MT7986 device trees with upstream 2023-06-05 11:36:32 +01:00
mt7986a-tplink-tl-xdr6086.dts mediatek: sync MT7986 device trees with upstream 2023-06-05 11:36:32 +01:00
mt7986a-tplink-tl-xdr6088.dts mediatek: sync MT7986 device trees with upstream 2023-06-05 11:36:32 +01:00
mt7986a-tplink-tl-xtr8488.dts mediatek: add support for TP-Link TL-XTR8488 2024-07-25 22:54:16 +02:00
mt7986a-xiaomi-redmi-router-ax6000-stock.dts mediatek: add new layout for Xiaomi Redmi Router AX6000 for OpenWrt U-Boot 2022-12-29 03:00:31 +00:00
mt7986a-xiaomi-redmi-router-ax6000-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7986a-xiaomi-redmi-router-ax6000.dtsi mediatek: clean duplicated #include in Xiaomi Redmi AX6000's dts 2024-03-08 16:51:35 +08:00
mt7986a-zyxel-ex5601-t0-common.dtsi Revert "mediatek: rename PHY LEDs to match upstream bindings" 2025-03-21 00:53:23 +00:00
mt7986a-zyxel-ex5601-t0-stock.dts mediatek: filogic: fix mt7986a-zyxel-ex5601-t0-stock.dts model name and eth1 wan definition 2025-02-09 16:06:11 +01:00
mt7986a-zyxel-ex5601-t0-ubootmod.dts mediatek: filogic: convert Zyxel EX5601-T0 to fitblk 2024-08-28 15:11:51 +01:00
mt7986a-zyxel-ex5700-telenor.dts mediatek: filogic: PHY LEDs do have an address, gpio-leds don't 2025-03-21 01:19:19 +00:00
mt7986b-mercusys-mr90x-v1-common.dtsi mediatek: MERCUSYS MR90X v1: add OpenWrt U-Boot (UBI) layout 2024-11-30 18:36:05 +01:00
mt7986b-mercusys-mr90x-v1-ubi.dts mediatek: MERCUSYS MR90X v1: add OpenWrt U-Boot (UBI) layout 2024-11-30 18:36:05 +01:00
mt7986b-mercusys-mr90x-v1.dts mediatek: MERCUSYS MR90X v1: add OpenWrt U-Boot (UBI) layout 2024-11-30 18:36:05 +01:00
mt7986b-netgear-wax220.dts mediatek-filogic: fix wax220 wifi leds 2025-01-18 21:39:13 +01:00
mt7986b-tplink-re6000xd.dts mediatek: filogic: add support for TP-LINK RE6000XD 2024-07-04 22:14:32 +02:00
mt7988a-arcadyan-mozart.dts mediatek: filogic: add Arcadyan Mozart platform 2024-11-01 07:43:00 +01:00
mt7988a-smartrg-mt-stuart.dtsi Revert "mediatek: rename PHY LEDs to match upstream bindings" 2025-03-21 00:53:23 +00:00
mt7988a-smartrg-SDG-8733.dts mediatek: filogic: add Adtran SmartRG Mount Stuart series 2024-05-24 18:34:13 +01:00
mt7988a-smartrg-SDG-8734.dts mediatek: filogic: add Adtran SmartRG Mount Stuart series 2024-05-24 18:34:13 +01:00
mt7988d-asus-zenwifi-bt8-ubootmod.dts mediatek: filogic: add build for ASUS ZenWiFi BT8 with OpenWrt's U-Boot 2025-03-30 02:02:58 +01:00
mt7988d-asus-zenwifi-bt8.dts mediatek: filogic: prepare for ubootmod build of ASUS ZenWiFi BT8 2025-03-30 02:02:58 +01:00
mt7988d-asus-zenwifi-bt8.dtsi mediatek: filogic: prepare for ubootmod build of ASUS ZenWiFi BT8 2025-03-30 02:02:58 +01:00
mt7988d-smartrg-SDG-8733A.dts mediatek: use NVMEM framework on all Adtran devices 2024-10-15 17:56:06 +01:00