1
0
Fork 0
forked from mirror/openwrt
openwrt/package/boot
Sven Eckelmann (Plasma Cloud) c7c54f3134 ramips: add support for Plasma Cloud PAX1800-Lite
Plasma Cloud PAX1800-Lite is a dual-band Wi-Fi 6 router, based on MediaTek
MT7621A + MT79x5D platform.

Specifications:

- SOC:      MT7621AT (880 MHz)
- DRAM:     DDR3 448 MiB (Nanya NT5CC256M16DP-DI)
- Flash:    2 MiB SPI NOR (S25FL016K) + 128 MB SPI NAND (W25N02KVZEIR)
- Ethernet: 1x 10/100/1000 Mbps (SOC's built-in switch, with PoE+)
- Wi-Fi:    2x2:2 2.4/5 GHz (MT7905DAN + MT7975DN)
            (MT7905DAN doesn't support background DFS scan/BT)
- LED:      tri-color LED for status (red, blue, green)
- Buttons:  1x (reset)
- Antenna:  4x internal, non-detachable omnidirectional
- UART:     1x 4-pin (2.54 mm pitch, marked as "3V3 G/RX GND W/TX")
- Power:    12 V DC/2 A (DC jack)

MAC addresses:

WAN:     54:9C:27:xx:xx:00 (factory 0x3fff4, device label)
2.4 GHz: 54:9C:27:xx:xx:02 (factory 0x4, device label +2)
5 GHz:   54:9C:27:xx:xx:08 (factory 0xa, device label +8)

Flashing instructions:
======================

Various methods can be used to install the actual image on the flash.
Two easy ones are:

ap51-flash
----------

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the image to the u-boot when the device boots up.

initramfs from TFTP
-------------------

The serial console (115200 8N1) must be used to access the u-boot shell
during bootup. It can then be used to first boot up the initramfs image
from a TFTP server (here with the IP 192.168.1.21):

    setenv serverip 192.168.1.21
    setenv ipaddr 192.168.1.1
    tftpboot 0x83001000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr

The actual sysupgrade image can then be transferred (on the LAN port) to the
device via

    scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/

On the device, the sysupgrade must then be started using

    sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin

Signed-off-by: Sven Eckelmann (Plasma Cloud) <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20152
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-10-04 20:30:36 +02:00
..
apex
arm-trusted-firmware-bcm63xx
arm-trusted-firmware-mediatek arm-trusted-firmware-mediatek: add mt7981 DDR3 1866 MHz builds 2025-09-23 23:11:53 +02:00
arm-trusted-firmware-mvebu
arm-trusted-firmware-rockchip arm-trusted-firmware-rockchip: Update to 2.13 2025-10-02 22:42:35 +02:00
arm-trusted-firmware-stm32
arm-trusted-firmware-sunxi
arm-trusted-firmware-tools
at91bootstrap
fconfig
grub2
imx-bootlets
kexec-tools
kobs-ng
mt7623n-preloader
opensbi
optee-os-stm32 optee-os-stm32: bump to 4.7.0 2025-08-17 19:02:33 +02:00
rkbin rkbin: pack rk3576 tpl blob 2025-10-02 22:42:35 +02:00
tfa-layerscape tfa-layerscape: Bump to lf-6.12.20-2.0.0 2025-08-17 19:00:58 +02:00
uboot-airoha boot: Introduce support for U-Boot support for Airoha EN7581/AN7583 2025-09-26 09:05:21 +02:00
uboot-armsr
uboot-at91
uboot-ath79
uboot-bcm53xx
uboot-bcm4908
uboot-bmips
uboot-d1
uboot-fritz4040
uboot-imx
uboot-kirkwood
uboot-lantiq
uboot-layerscape uboot-layerscape: do not build efimkcapsule tool 2025-08-22 11:24:43 +02:00
uboot-mediatek uboot-mediatek: rax3000m: use ddr3-1866mhz built in the dependency 2025-09-30 21:12:06 +08:00
uboot-mvebu uboot-mvebu: update to version 2025.07 2025-08-01 23:47:33 +02:00
uboot-mxs
uboot-omap
uboot-rockchip uboot-rockchip: add Radxa ROCK 4D support 2025-10-02 22:42:35 +02:00
uboot-sifiveu
uboot-stm32 uboot-stm32: bump to 2025.07 2025-08-17 19:02:33 +02:00
uboot-sunxi uboot-sunxi: randomize ethaddr on Olimex A20 boards 2025-09-08 22:35:39 +02:00
uboot-tegra
uboot-tools ramips: add support for Plasma Cloud PAX1800-Lite 2025-10-04 20:30:36 +02:00
uboot-zynq