forked from mirror/openwrt
1199a7aad6
SIM SIMAX1800U has the similar hardware design as the SIMAX1800T. The only difference is the Ethernet portmap. Specification ------------- - SoC : Mediatek MT7621 - RAM : 256 MiB DDR3 - Flash : 128 MiB NAND Flash - WLAN : Mediatek MT7905 DBDC - 2.4 GHz : 2x2 MIMO WiFi6 - 5 GHz : 2x2 MIMO WiFi6 - Ethernet : MT7621 built-in 10/100/1000 Mbps 1x WAN; 3x LAN - UART : 3.3V, 115200n8 - Buttons : 1x RESET; 1x WPS/MESH - LEDs : 1x Multi-Color(Blue;Green;Red) - Power : DC 12V1A - CMIIT ID : 2022AP7163 - TFTP IP : - server : 192.168.1.254 - router : 192.168.1.28 TFTP Installation(recommend) ------------ 1. Set local tftp server IP "192.168.1.254" and NetMask "255.255.255.0". 2. Rename initramfs-kernel.bin to "factory.bin" and put it in the root directory of the tftp server. tftpd64 is a good choice for Windows. 3. Remove all Ethernet cables and WiFi connections from the PC, except for the one connected to the SIMAX1800U. Start the TFTP server, plug in the power adapter and wait for the OpenWrt system to boot. 4. Backup "firmware" partition and rename it to "firmware.bin". We need it to back to the stock firmware. 5. Use "fw_printenv" command to list envs. If "firmware_select=2" is observed then set u-boot env variable via command: `fw_setenv firmware_select 1` 6. Apply sysupgrade.bin in OpenWrt LuCI. Web UI Installation ------------ 1. Apply update by uploading initramfs-factory.bin to the web UI. 2. Use "fw_printenv" command to list envs. If "firmware_select=2" is observed then set u-boot env variable via command: `fw_setenv firmware_select 1` 3. Apply squashfs-sysupgrade.bin in OpenWrt LuCI. Return to Stock Firmware ---------------------------- Restore the backup firmware partition in the installation step 4. MAC addresses ------------- +---------+-------------------+ | | MAC example | +---------+-------------------+ | LABEL | 98:xx:xx:xx:xx:b2 | | LAN | 98:xx:xx:xx:xx:b5 | | WAN | 98:xx:xx:xx:xx:b2 | | WLAN2G | 98:xx:xx:xx:xx:b4 | | WLAN5G | 9a:xx:xx:xx:xx:b4 | +---------+-------------------+ Tips: ----------- User can use `TFTP Installation` method to recover a brick device. Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Link: https://github.com/openwrt/openwrt/pull/19455 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
225 lines
5.1 KiB
Bash
Executable file
225 lines
5.1 KiB
Bash
Executable file
#
|
|
# Copyright (C) 2010 OpenWrt.org
|
|
#
|
|
|
|
PART_NAME=firmware
|
|
REQUIRE_IMAGE_METADATA=1
|
|
|
|
RAMFS_COPY_BIN='fw_printenv fw_setenv'
|
|
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
|
|
|
platform_check_image() {
|
|
local board=$(board_name)
|
|
local magic="$(get_magic_long "$1")"
|
|
|
|
[ "$#" -gt 1 ] && return 1
|
|
|
|
case "$board" in
|
|
buffalo,wsr-2533dhpl2|\
|
|
buffalo,wsr-2533dhpls)
|
|
buffalo_check_image "$board" "$magic" "$1" || return 1
|
|
;;
|
|
esac
|
|
|
|
return 0
|
|
}
|
|
|
|
platform_do_upgrade() {
|
|
local board=$(board_name)
|
|
|
|
case "$board" in
|
|
alfa-network,quad-e4g)
|
|
[ "$(fw_printenv -n dual_image 2>/dev/null)" = "1" ] &&\
|
|
[ -n "$(find_mtd_part backup)" ] && {
|
|
PART_NAME=backup
|
|
if [ "$(fw_printenv -n bootactive 2>/dev/null)" = "1" ]; then
|
|
fw_setenv bootactive 2 || exit 1
|
|
else
|
|
fw_setenv bootactive 1 || exit 1
|
|
fi
|
|
}
|
|
;;
|
|
ampedwireless,ally-00x19k|\
|
|
ampedwireless,ally-r1900k)
|
|
if [ "$(fw_printenv --lock / -n bootImage 2>/dev/null)" != "0" ]; then
|
|
fw_setenv --lock / bootImage 0 || exit 1
|
|
fi
|
|
;;
|
|
iptime,ax2004m)
|
|
if [ "$(fw_printenv -n boot_from 2>/dev/null)" != "firmware1" ]; then
|
|
fw_setenv boot_from firmware1 || exit 1
|
|
fi
|
|
;;
|
|
mikrotik,ltap-2hnd|\
|
|
mikrotik,routerboard-750gr3|\
|
|
mikrotik,routerboard-760igs|\
|
|
mikrotik,routerboard-m11g|\
|
|
mikrotik,routerboard-m33g)
|
|
[ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
|
|
;;
|
|
asus,rt-ac65p|\
|
|
asus,rt-ac85p)
|
|
echo "Backing up firmware"
|
|
dd if=/dev/mtd4 bs=1024 count=4096 > /tmp/backup_firmware.bin
|
|
dd if=/dev/mtd5 bs=1024 count=52224 >> /tmp/backup_firmware.bin
|
|
mtd -e firmware2 write /tmp/backup_firmware.bin firmware2
|
|
;;
|
|
esac
|
|
|
|
case "$board" in
|
|
ampedwireless,ally-00x19k|\
|
|
ampedwireless,ally-r1900k|\
|
|
arcadyan,we420223-99|\
|
|
asus,rt-ac65p|\
|
|
asus,rt-ac85p|\
|
|
asus,rt-ax53u|\
|
|
asus,rt-ax54|\
|
|
asus,4g-ax56|\
|
|
beeline,smartbox-flash|\
|
|
beeline,smartbox-giga|\
|
|
beeline,smartbox-pro|\
|
|
beeline,smartbox-turbo|\
|
|
beeline,smartbox-turbo-plus|\
|
|
belkin,rt1800|\
|
|
dlink,covr-x1860-a1|\
|
|
dlink,dap-x1860-a1|\
|
|
dlink,dir-1960-a1|\
|
|
dlink,dir-2055-a1|\
|
|
dlink,dir-2150-a1|\
|
|
dlink,dir-2150-r1|\
|
|
dlink,dir-2640-a1|\
|
|
dlink,dir-2660-a1|\
|
|
dlink,dir-3040-a1|\
|
|
dlink,dir-3060-a1|\
|
|
dlink,dir-853-a3|\
|
|
elecom,wmc-x1800gst|\
|
|
elecom,wsc-x1800gs|\
|
|
etisalat,s3|\
|
|
h3c,tx1800-plus|\
|
|
h3c,tx1801-plus|\
|
|
h3c,tx1806|\
|
|
haier,har-20s2u1|\
|
|
hiwifi,hc5962|\
|
|
gemtek,wvrtm-127acn|\
|
|
gemtek,wvrtm-130acn|\
|
|
iptime,a3004t|\
|
|
iptime,ax2004m|\
|
|
iptime,t5004|\
|
|
jcg,q20|\
|
|
keenetic,kn-3510|\
|
|
linksys,e5600|\
|
|
linksys,e7350|\
|
|
linksys,ea6350-v4|\
|
|
linksys,ea7300-v1|\
|
|
linksys,ea7300-v2|\
|
|
linksys,ea7500-v2|\
|
|
linksys,ea8100-v1|\
|
|
linksys,ea8100-v2|\
|
|
mts,wg430223|\
|
|
netgear,eax12|\
|
|
netgear,r6220|\
|
|
netgear,r6260|\
|
|
netgear,r6350|\
|
|
netgear,r6700-v2|\
|
|
netgear,r6800|\
|
|
netgear,r6850|\
|
|
netgear,r6900-v2|\
|
|
netgear,r7200|\
|
|
netgear,r7450|\
|
|
netgear,wac104|\
|
|
netgear,wac124|\
|
|
netgear,wax202|\
|
|
netgear,wax214v2|\
|
|
netis,n6|\
|
|
netis,wf2881|\
|
|
raisecom,msg1500-x-00|\
|
|
rostelecom,rt-fe-1a|\
|
|
rostelecom,rt-sf-1|\
|
|
sercomm,na502|\
|
|
sercomm,na502s|\
|
|
sim,simax1800t|\
|
|
sim,simax1800u|\
|
|
tplink,ec330-g5u-v1|\
|
|
wifire,s1500-nbn|\
|
|
xiaomi,mi-router-3g|\
|
|
xiaomi,mi-router-3-pro|\
|
|
xiaomi,mi-router-4|\
|
|
xiaomi,mi-router-ac2100|\
|
|
xiaomi,mi-router-cr6606|\
|
|
xiaomi,mi-router-cr6608|\
|
|
xiaomi,mi-router-cr6609|\
|
|
xiaomi,redmi-router-ac2100|\
|
|
z-router,zr-2660|\
|
|
zyxel,nwa50ax|\
|
|
zyxel,nwa55axe)
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
buffalo,wsr-2533dhpl2|\
|
|
buffalo,wsr-2533dhpls)
|
|
buffalo_do_upgrade "$1"
|
|
;;
|
|
dna,valokuitu-plus-ex400|\
|
|
genexis,pulse-ex400)
|
|
inteno_do_upgrade "$1"
|
|
;;
|
|
elecom,wrc-x1800gs)
|
|
[ "$(fw_printenv -n bootmenu_delay)" != "0" ] || \
|
|
fw_setenv bootmenu_delay 3
|
|
iodata_mstc_set_flag "bootnum" "persist" "0x4" "1,2" "1"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
iodata,wn-ax1167gr2|\
|
|
iodata,wn-ax2033gr|\
|
|
iodata,wn-dx1167r|\
|
|
iodata,wn-dx2033gr)
|
|
iodata_mstc_set_flag "debugflag" "factory" "0xfe75" "0,1" "1"
|
|
iodata_mstc_set_flag "bootnum" "persist" "0x4" "1,2" "1"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
iodata,wn-deax1800gr)
|
|
iodata_mstc_set_flag "bootnum" "working" "0x4" "0,1" "0"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
iodata,wn-dx1200gr)
|
|
iodata_mstc_set_flag "debugflag" "factory" "0x1fe75" "0,1" "1"
|
|
iodata_mstc_set_flag "bootnum" "persist" "0x4" "1,2" "1"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
tplink,er605-v2)
|
|
echo "Upgrading tplink,er605-v2"
|
|
CI_UBIPART="firmware"
|
|
CI_KERNPART="kernel"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
ubnt,edgerouter-x|\
|
|
ubnt,edgerouter-x-sfp)
|
|
platform_upgrade_ubnt_erx "$1"
|
|
;;
|
|
zyxel,lte3301-plus|\
|
|
zyxel,lte5398-m904|\
|
|
zyxel,lte7490-m904|\
|
|
zyxel,nr7101)
|
|
fw_setenv CheckBypass 0
|
|
fw_setenv Image1Stable 0
|
|
[ "$(fw_printenv -n BootingFlag)" = "0" ] || fw_setenv BootingFlag 0
|
|
CI_KERNPART="Kernel"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
zyxel,wap6805)
|
|
local kernel2_mtd="$(find_mtd_part Kernel2)"
|
|
[ "$(hexdump -n 4 -e '"%x"' $kernel2_mtd)" = "56190527" ] &&\
|
|
[ "$(hexdump -n 4 -s 104 -e '"%x"' $kernel2_mtd)" != "0" ] &&\
|
|
dd bs=4 count=1 seek=26 conv=notrunc if=/dev/zero of=$kernel2_mtd 2>/dev/null &&\
|
|
echo "Kernel2 sequence number was reset to 0"
|
|
CI_KERNPART="Kernel"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
zyxel,wsm20)
|
|
zyxel_mstc_upgrade_prepare
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
*)
|
|
default_do_upgrade "$1"
|
|
;;
|
|
esac
|
|
}
|