arne/openwrt
1
0
Fork 0
forked from mirror/openwrt
Code Pull requests Activity
openwrt/target/linux/ramips/image/mt76x8.mk
Kamil Jońca 1c62e21a8d ramips: mt76x8: add support for Cudy LT400E v1 
This commit adds support for the Cudy LT400E v1,
an indoor 4G/LTE WiFi router.
It has 4x10/100 Mbps Ethernet ports, a 2.4 GHz radio,
and a Quectel 4G/LTE EC200A modem.

Hardware:

SoC: MediaTek MT7628NN
Flash: 8 MiB SPI
RAM: 64 MiB
Ethernet: 4x10/100 Mbps
WiFi: 2.4 GHz (embedded MT7628, 802.11n)
WWAN: Quectel EC200A-EL 4G/LTE Cat 4 modem
SIM: nano-SIM slot
Buttons: 1 Reset button, 1 WPS button
LEDs: 10x (blue)
Power: 12 V DC barrel jack

Installation:
The stock firmware is a customized variant of OpenWrt, which implements
a signature check that only allows flashing official firmware. Cudy
offers, on their website [1][6], intermediate OpenWrt firmware images
which do not implement the signature check. After flashing the
intermediate image, the upstream (i.e., official) OpenWrt image can be
installed.  See the device's entry in OpenWrt's Wiki for more details [2].

Cellular network:
The Quectel EC200A modem is internally connected to the SoC via USB, and
operates in ECM mode, supported by the CDC Ether driver [3]. When
inserting a SIM card in the slot, if no PIN is needed, the network
interface "usb0" is brought up and the cellular connection works out of
the box. To interact with the modem directly (unlock the PIN, change APN
and PDP settings, etc.), AT commands can be sent with picocom to serial
port /dev/ttyUSB2 [4].

Recovery:
The stock firmware can be recovered via TFTP, as the bootloader (based
on U-Boot) implements a recovery client. Set up a TFTP server on your
computer with IP 192.168.88.1/24 serving the stock firmware from Cudy's
website renamed to "recovery.bin". Press the Reset button (keep it
pressed), power on the device, wait for the TFTP server to send the
recovery.bin file, then release the Reset button. The router will take a
couple of minutes to reboot and set up the stock firmware. See the
device's entry in OpenWrt's Wiki for more details [2].

Discussion:
Use the dedicated thread in OpenWrt's forum to discuss any aspects [5].

Acknowledgments:
The code to support this device is largely based on the sources kindly
provided by Cudy in compliance with the GPL license. Thanks for
supporting the OpenWrt community.

Links:
[1] https://www.cudy.com/blogs/faq/openwrt-software-download
[2] https://openwrt.org/toh/cudy/lt400e_v1
[3] https://openwrt.org/docs/guide-user/network/wan/wwan/ethernetoverusb_cdc
[4] https://openwrt.org/docs/guide-user/network/wan/wwan/at_commands
[5] https://forum.openwrt.org/t/242466
[6] https://drive.google.com/drive/folders/1BKVarlwlNxf7uJUtRhuMGUqeCa5KpMnj

Co-authored-by: rogerpueyo <roger.pueyo@guifi.net>

Signed-off-by: Kamil Jońca <kjonca@onet.pl>
Link: https://github.com/openwrt/openwrt/pull/21246
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2026-01-20 01:47:00 +01:00

1489 lines
41 KiB
Makefile
Raw Blame History

#
# MT76x8 Profiles
#
include ./common-tp-link.mk
DEFAULT_SOC := mt7628an
DEVICE_VARS += SUPPORTED_TELTONIKA_DEVICES
DEVICE_VARS += SUPPORTED_TELTONIKA_HW_MODS
define Build/creality_wb-01-factory
mv $@ $(dir $@)factory.bin
$(eval kernel_size=851968)
( \
echo '#!/bin/sh'; \
echo '[ -z "$$2" ] && file="factory.bin" || file="$$2/factory.bin"'; \
echo 'file_size=$$(wc -c < $$file)'; \
echo 'rootfs_size=$$((file_size - $(kernel_size)))'; \
echo 'mtd_write -o 0 -l $(kernel_size) write $$file Kernel'; \
echo 'mtd_write -r -o $(kernel_size) -l $$rootfs_size write $$file RootFS'; \
) > $(dir $@)install.sh
tar cjf $@ -C $(dir $@) factory.bin install.sh
endef
define Build/elecom-header
$(eval model_id=$(1))
( \
fw_size="$$(printf '%08x' $$(stat -c%s $@))"; \
echo -ne "$$(echo "031d6129$${fw_size}06000000$(model_id)" | \
sed 's/../\\x&/g')"; \
dd if=/dev/zero bs=92 count=1; \
data_crc="$$(dd if=$@ | gzip -c | tail -c 8 | \
od -An -N4 -tx4 --endian little | tr -d ' \n')"; \
echo -ne "$$(echo "$${data_crc}00000000" | sed 's/../\\x&/g')"; \
dd if=$@; \
) > $@.new
mv $@.new $@
endef
define Build/qding-header
$(STAGING_DIR_HOST)/bin/mkqdimg \
-B $(1) -f $@ -o $@.new
mv $@.new $@
endef
define Build/ravpower-wd009-factory
mkimage -A mips -T standalone -C none -a 0x80010000 -e 0x80010000 \
-n "OpenWrt Bootloader" -d $(UBOOT_PATH) $@.new
cat $@ >> $@.new
@mv $@.new $@
endef
define Device/7links_wlr-12xx
IMAGE_SIZE := 7872k
DEVICE_VENDOR := 7Links
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7663-firmware-ap
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | check-size | append-metadata
endef
define Device/7links_wlr-1230
$(Device/7links_wlr-12xx)
DEVICE_MODEL := WLR-1230
endef
TARGET_DEVICES += 7links_wlr-1230
define Device/7links_wlr-1240
$(Device/7links_wlr-12xx)
DEVICE_MODEL := WLR-1240
endef
TARGET_DEVICES += 7links_wlr-1240
define Device/alfa-network_awusfree1
IMAGE_SIZE := 7872k
DEVICE_VENDOR := ALFA Network
DEVICE_MODEL := AWUSFREE1
DEVICE_PACKAGES := uboot-envtools
SUPPORTED_DEVICES += awusfree1
endef
TARGET_DEVICES += alfa-network_awusfree1
define Device/asus_rt-ac1200
IMAGE_SIZE := 16064k
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AC1200
DEVICE_ALT0_VENDOR := ASUS
DEVICE_ALT0_MODEL := RT-N600
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci \
kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += asus_rt-ac1200
define Device/asus_rt-ac1200-v2
IMAGE_SIZE := 16064k
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AC1200
DEVICE_VARIANT := V2
DEVICE_ALT0_VENDOR := ASUS
DEVICE_ALT0_MODEL := RT-AC750L
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7663-firmware-ap
endef
TARGET_DEVICES += asus_rt-ac1200-v2
define Device/asus_rt-n10p-v3
IMAGE_SIZE := 7872k
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-N10P
DEVICE_VARIANT := V3
DEFAULT := n
endef
TARGET_DEVICES += asus_rt-n10p-v3
define Device/asus_rt-n11p-b1
IMAGE_SIZE := 7872k
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-N11P
DEVICE_VARIANT := B1
DEVICE_ALT0_VENDOR := ASUS
DEVICE_ALT0_MODEL := RT-N12+
DEVICE_ALT0_VARIANT := B1
DEVICE_ALT1_VENDOR := ASUS
DEVICE_ALT1_MODEL := RT-N300
DEVICE_ALT1_VARIANT := B1
DEFAULT := n
endef
TARGET_DEVICES += asus_rt-n11p-b1
define Device/asus_rt-n12-vp-b1
IMAGE_SIZE := 7872k
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-N12 VP
DEVICE_VARIANT := B1
endef
TARGET_DEVICES += asus_rt-n12-vp-b1
define Device/buffalo_wcr-1166ds
IMAGE_SIZE := 7936k
BUFFALO_TAG_PLATFORM := MTK
BUFFALO_TAG_VERSION := 9.99
BUFFALO_TAG_MINOR := 9.99
IMAGES += factory.bin
IMAGE/sysupgrade.bin := trx -M 0x746f435c | pad-rootfs | append-metadata
IMAGE/factory.bin := trx -M 0x746f435c | pad-rootfs | append-metadata | \
buffalo-enc WCR-1166DS $$(BUFFALO_TAG_VERSION) -l | \
buffalo-tag-dhp WCR-1166DS JP JP | buffalo-enc-tag -l | buffalo-dhp-image
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WCR-1166DS
DEVICE_PACKAGES := kmod-mt76x2
SUPPORTED_DEVICES += wcr-1166ds
endef
TARGET_DEVICES += buffalo_wcr-1166ds
define Device/comfast_cf-wr617ac
IMAGE_SIZE := 7872k
DTS := CF-WR617AC
DEVICE_VENDOR := COMFAST
DEVICE_MODEL := CF-WR617AC
DEVICE_PACKAGES := kmod-mt76x2 kmod-rt2800-pci
endef
TARGET_DEVICES += comfast_cf-wr617ac
define Device/comfast_cf-wr758ac
IMAGE_SIZE := 7872k
DEVICE_VENDOR := COMFAST
DEVICE_MODEL := CF-WR758AC
DEVICE_ALT0_VENDOR := Joowin
DEVICE_ALT0_MODEL := JW-WR758AC
endef
define Device/comfast_cf-wr758ac-v1
$(Device/comfast_cf-wr758ac)
DEVICE_PACKAGES := kmod-mt76x2
DEVICE_VARIANT := V1
DEVICE_ALT0_VARIANT := V1
SUPPORTED_DEVICES += joowin,jw-wr758ac-v1
endef
TARGET_DEVICES += comfast_cf-wr758ac-v1
define Device/comfast_cf-wr758ac-v2
$(Device/comfast_cf-wr758ac)
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7663-firmware-ap
DEVICE_VARIANT := V2
DEVICE_ALT0_VARIANT := V2
SUPPORTED_DEVICES += joowin,jw-wr758ac-v2
endef
TARGET_DEVICES += comfast_cf-wr758ac-v2
define Device/creality_wb-01
IMAGE_SIZE := 16064k
IMAGES += cxsw_update.tar.bz2
IMAGE/cxsw_update.tar.bz2 := $$(sysupgrade_bin) | creality_wb-01-factory
DEVICE_VENDOR := Creality
DEVICE_MODEL := WB-01
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620
SUPPORTED_DEVICES += creality_wb-01
endef
TARGET_DEVICES += creality_wb-01
define Device/cudy_lt400e-v1
IMAGE_SIZE := 7808k
DEVICE_VENDOR := Cudy
DEVICE_MODEL := LT400E
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-net-cdc-ether \
kmod-usb-serial-option
SUPPORTED_DEVICES += cudy,lt400e
endef
TARGET_DEVICES += cudy_lt400e-v1
define Device/cudy_m1200-v1
IMAGE_SIZE := 15872k
DEVICE_VENDOR := Cudy
DEVICE_MODEL := M1200
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7663-firmware-ap
UIMAGE_NAME := R22
SUPPORTED_DEVICES += R22
endef
TARGET_DEVICES += cudy_m1200-v1
define Device/cudy_re1200-outdoor-v1
IMAGE_SIZE := 7808k
DEVICE_VENDOR := Cudy
DEVICE_MODEL := RE1200 Outdoor
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7663-firmware-ap
UIMAGE_NAME := R56
SUPPORTED_DEVICES += R56
endef
TARGET_DEVICES += cudy_re1200-outdoor-v1
define Device/cudy_tr1200-v1
IMAGE_SIZE := 15872k
DEVICE_VENDOR := Cudy
DEVICE_MODEL := TR1200
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
kmod-mt7615e kmod-mt7663-firmware-ap
SUPPORTED_DEVICES += R46
endef
TARGET_DEVICES += cudy_tr1200-v1
define Device/cudy_wr1000
IMAGE_SIZE := 7872k
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | jcg-header 92.122
JCG_MAXSIZE := 7872k
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR1000
DEVICE_PACKAGES := kmod-mt76x2
SUPPORTED_DEVICES += wr1000
endef
TARGET_DEVICES += cudy_wr1000
define Device/d-team_pbr-d1
IMAGE_SIZE := 16064k
DEVICE_VENDOR := PandoraBox
DEVICE_MODEL := PBR-D1
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
SUPPORTED_DEVICES += pbr-d1
endef
TARGET_DEVICES += d-team_pbr-d1
define Device/dlink_dap-1325-a1
IMAGE_SIZE := 7872k
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DAP-1325 A1
endef
TARGET_DEVICES += dlink_dap-1325-a1
define Device/duzun_dm06
IMAGE_SIZE := 7872k
DEVICE_VENDOR := DuZun
DEVICE_MODEL := DM06
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += duzun-dm06
endef
TARGET_DEVICES += duzun_dm06
define Device/elecom_wrc-1167fs
IMAGE_SIZE := 7360k
DEVICE_VENDOR := ELECOM
DEVICE_MODEL := WRC-1167FS
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to 64k | check-size | \
xor-image -p 29944A25 -x | elecom-header 00228000 | \
elecom-product-header WRC-1167FS
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += elecom_wrc-1167fs
define Device/glinet_gl-mt300n-v2
IMAGE_SIZE := 16064k
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-MT300N
DEVICE_VARIANT := V2
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
SUPPORTED_DEVICES += gl-mt300n-v2
endef
TARGET_DEVICES += glinet_gl-mt300n-v2
define Device/glinet_microuter-n300
IMAGE_SIZE := 16064k
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := microuter-N300
SUPPORTED_DEVICES += microuter-n300
endef
TARGET_DEVICES += glinet_microuter-n300
define Device/glinet_vixmini
IMAGE_SIZE := 7872k
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := VIXMINI
SUPPORTED_DEVICES += vixmini
endef
TARGET_DEVICES += glinet_vixmini
define Device/hak5_wifi-pineapple-mk7
IMAGE_SIZE := 32448k
DEVICE_VENDOR := Hak5
DEVICE_MODEL := WiFi Pineapple Mark 7
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
SUPPORTED_DEVICES += wifi-pineapple-mk7
endef
TARGET_DEVICES += hak5_wifi-pineapple-mk7
define Device/hilink_hlk-7628n
IMAGE_SIZE := 32448k
DEVICE_VENDOR := HILINK
DEVICE_MODEL := HLK-7628N
endef
TARGET_DEVICES += hilink_hlk-7628n
define Device/hilink_hlk-7688a
IMAGE_SIZE := 32448k
DEVICE_VENDOR := Hi-Link
DEVICE_MODEL := HLK-7688A
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += hilink_hlk-7688a
define Device/hiwifi_hc5611
IMAGE_SIZE := 15808k
DEVICE_VENDOR := HiWiFi
DEVICE_MODEL := HC5611
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += hiwifi_hc5611
define Device/hiwifi_hc5661a
IMAGE_SIZE := 15808k
DEVICE_VENDOR := HiWiFi
DEVICE_MODEL := HC5661A
DEVICE_PACKAGES := kmod-mmc-mtk
SUPPORTED_DEVICES += hc5661a
endef
TARGET_DEVICES += hiwifi_hc5661a
define Device/hiwifi_hc5761a
IMAGE_SIZE := 15808k
DEVICE_VENDOR := HiWiFi
DEVICE_MODEL := HC5761A
DEVICE_PACKAGES := kmod-mmc-mtk kmod-mt76x0e kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += hiwifi_hc5761a
define Device/hiwifi_hc5861b
IMAGE_SIZE := 15808k
DEVICE_VENDOR := HiWiFi
DEVICE_MODEL := HC5861B
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += hiwifi_hc5861b
define Device/hongdian_h7920-v40
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Hongdian
DEVICE_MODEL := H7920
DEVICE_VARIANT := v40
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
endef
TARGET_DEVICES += hongdian_h7920-v40
define Device/hongdian_h8850-v20
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Hongdian
DEVICE_MODEL := H8850
DEVICE_VARIANT := v20
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
endef
TARGET_DEVICES += hongdian_h8850-v20
define Device/iptime_a3
IMAGE_SIZE := 7936k
UIMAGE_NAME := a3
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := A3
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += iptime_a3
define Device/iptime_a604m
IMAGE_SIZE := 7936k
UIMAGE_NAME := a604m
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := A604M
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += iptime_a604m
define Device/jotale_js76x8
DEVICE_VENDOR := Jotale
DEVICE_MODEL := JS76x8
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
define Device/jotale_js76x8-8m
$(Device/jotale_js76x8)
IMAGE_SIZE := 7872k
DEVICE_VARIANT := 8M
endef
TARGET_DEVICES += jotale_js76x8-8m
define Device/jotale_js76x8-16m
$(Device/jotale_js76x8)
IMAGE_SIZE := 16064k
DEVICE_VARIANT := 16M
endef
TARGET_DEVICES += jotale_js76x8-16m
define Device/jotale_js76x8-32m
$(Device/jotale_js76x8)
IMAGE_SIZE := 32448k
DEVICE_VARIANT := 32M
endef
TARGET_DEVICES += jotale_js76x8-32m
define Device/keenetic_kn-1112
BLOCKSIZE := 64k
IMAGE_SIZE := 16121856
DEVICE_VENDOR := Keenetic
DEVICE_MODEL := KN-1112
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to $$$$(BLOCKSIZE) | \
check-size | zyimage -d 0x801112 -v "KN-1112"
endef
TARGET_DEVICES += keenetic_kn-1112
define Device/keenetic_kn-1212
BLOCKSIZE := 64k
IMAGE_SIZE := 15073280
DEVICE_VENDOR := Keenetic
DEVICE_MODEL := KN-1212
DEVICE_PACKAGES := kmod-usb2
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to $$$$(BLOCKSIZE) | \
check-size | zyimage -d 0x801212 -v "KN-1212"
endef
TARGET_DEVICES += keenetic_kn-1212
define Device/keenetic_kn-1221
BLOCKSIZE := 64k
IMAGE_SIZE := 29440k
DEVICE_VENDOR := Keenetic
DEVICE_MODEL := KN-1221
DEVICE_PACKAGES := kmod-usb2
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to $$$$(BLOCKSIZE) | \
check-size 14720k | zyimage -d 0x801221 -v "KN-1221"
endef
TARGET_DEVICES += keenetic_kn-1221
define Device/keenetic_kn-1613
IMAGE_SIZE := 15073280
DEVICE_VENDOR := Keenetic
DEVICE_MODEL := KN-1613
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7663-firmware-ap
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to $$$$(BLOCKSIZE) | \
check-size | zyimage -d 0x801613 -v "KN-1613"
endef
TARGET_DEVICES += keenetic_kn-1613
define Device/keenetic_kn-1711
BLOCKSIZE := 64k
IMAGE_SIZE := 15073280
DEVICE_VENDOR := Keenetic
DEVICE_MODEL := KN-1711
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7663-firmware-ap kmod-usb2
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to $$$$(BLOCKSIZE) | \
check-size | zyimage -d 0x801711 -v "KN-1711"
endef
TARGET_DEVICES += keenetic_kn-1711
define Device/keenetic_kn-1713
BLOCKSIZE := 64k
IMAGE_SIZE := 15073280
DEVICE_VENDOR := Keenetic
DEVICE_MODEL := KN-1713
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7663-firmware-ap kmod-usb2
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to $$$$(BLOCKSIZE) | \
check-size | zyimage -d 0x801713 -v "KN-1713"
endef
TARGET_DEVICES += keenetic_kn-1713
define Device/keenetic_kn-3211
IMAGE_SIZE := 31488k
DEVICE_VENDOR := Keenetic
DEVICE_MODEL := KN-3211
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to $$$$(BLOCKSIZE) | \
check-size | zyimage -d 0x803211 -v "KN-3211"
endef
TARGET_DEVICES += keenetic_kn-3211
define Device/kroks_kndrt31r16
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Kroks
DEVICE_MODEL := Rt-Cse5 UW DRSIM
DEVICE_ALT0_VENDOR := Kroks
DEVICE_ALT0_MODEL := KNdRt31R16
DEVICE_PACKAGES := kmod-usb2
SUPPORTED_DEVICES += kndrt31r16
endef
TARGET_DEVICES += kroks_kndrt31r16
define Device/kroks_kndrt31r19
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Kroks
DEVICE_MODEL := Rt-Pot mXw DS RSIM
DEVICE_ALT0_VENDOR := Kroks
DEVICE_ALT0_MODEL := KNdRt31R19
DEVICE_PACKAGES := kmod-usb2 uqmi
SUPPORTED_DEVICES += kndrt31r19
endef
TARGET_DEVICES += kroks_kndrt31r19
define Device/linksys_e5400
IMAGE_SIZE := 16000k
DEVICE_VENDOR := Linksys
DEVICE_MODEL := E5400
DEVICE_ALT0_VENDOR := Linksys
DEVICE_ALT0_MODEL := E2500
DEVICE_ALT0_VARIANT := v4
DEVICE_ALT1_VENDOR := Linksys
DEVICE_ALT1_MODEL := E5300
DEVICE_ALT2_VENDOR := Linksys
DEVICE_ALT2_MODEL := E5350
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += linksys_e5400
define Device/mediatek_linkit-smart-7688
IMAGE_SIZE := 32448k
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := LinkIt Smart 7688
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools kmod-mmc-mtk
SUPPORTED_DEVICES += linkits7688 linkits7688d
endef
TARGET_DEVICES += mediatek_linkit-smart-7688
define Device/mediatek_mt7628an-eval-board
IMAGE_SIZE := 7872k
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7628 EVB
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += mt7628
endef
TARGET_DEVICES += mediatek_mt7628an-eval-board
define Device/mercury_mac1200r-v2
IMAGE_SIZE := 7936k
DEVICE_VENDOR := Mercury
DEVICE_MODEL := MAC1200R
DEVICE_VARIANT := v2.0
DEVICE_PACKAGES := kmod-mt76x2
SUPPORTED_DEVICES += mac1200rv2
endef
TARGET_DEVICES += mercury_mac1200r-v2
define Device/mercusys_mb130-4g-v1
$(Device/tplink-v2)
IMAGE_SIZE := 14912k
DEVICE_VENDOR := MERCUSYS
DEVICE_MODEL := MB130-4G
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-mt7663-firmware-ap kmod-mt7615e \
kmod-usb-serial-option kmod-usb-net-cdc-ether
TPLINK_FLASHLAYOUT := 16MLmtk
IMAGES := sysupgrade.bin tftp-recovery.bin
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
endef
TARGET_DEVICES += mercusys_mb130-4g-v1
define Device/minew_g1-c
IMAGE_SIZE := 15744k
DEVICE_VENDOR := Minew
DEVICE_MODEL := G1-C
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-usb-serial-cp210x
SUPPORTED_DEVICES += minew-g1c
endef
TARGET_DEVICES += minew_g1-c
define Device/motorola_mwr03
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Motorola
DEVICE_MODEL := MWR03
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += motorola_mwr03
define Device/netgear_r6020
$(Device/netgear_sercomm_nor)
IMAGE_SIZE := 7104k
DEVICE_MODEL := R6020
DEVICE_PACKAGES := kmod-mt76x2
SERCOMM_HWNAME := R6020
SERCOMM_HWID := CFR
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x0040
SERCOMM_PAD := 576k
endef
TARGET_DEVICES += netgear_r6020
define Device/netgear_r6080
$(Device/netgear_sercomm_nor)
IMAGE_SIZE := 7552k
DEVICE_MODEL := R6080
DEVICE_PACKAGES := kmod-mt76x2
SERCOMM_HWNAME := R6080
SERCOMM_HWID := CFR
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x0040
SERCOMM_PAD := 576k
endef
TARGET_DEVICES += netgear_r6080
define Device/netgear_r6120
$(Device/netgear_sercomm_nor)
IMAGE_SIZE := 15744k
DEVICE_MODEL := R6120
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci
SERCOMM_HWNAME := R6120
SERCOMM_HWID := CGQ
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x0040
SERCOMM_PAD := 576k
endef
TARGET_DEVICES += netgear_r6120
define Device/onion_omega2
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Onion
DEVICE_MODEL := Omega2
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools
SUPPORTED_DEVICES += omega2
endef
TARGET_DEVICES += onion_omega2
define Device/onion_omega2p
IMAGE_SIZE := 32448k
DEVICE_VENDOR := Onion
DEVICE_MODEL := Omega2+
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools kmod-mmc-mtk
SUPPORTED_DEVICES += omega2p
endef
TARGET_DEVICES += onion_omega2p
define Device/oraybox_x1
IMAGE_SIZE := 15360k
DEVICE_VENDOR := OrayBox
DEVICE_MODEL := X1
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += oraybox_x1
define Device/qding_qc202
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Qding
DEVICE_MODEL := QC202
DEVICE_PACKAGES := kmod-i2c-mt7628 kmod-gpio-beeper kmod-input-matrix-keypad kmod-input-evdev uboot-envtools
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | qding-header qc202
endef
TARGET_DEVICES += qding_qc202
define Device/rakwireless_rak633
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Rakwireless
DEVICE_MODEL := RAK633
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += rakwireless_rak633
define Device/ravpower_rp-wd009
IMAGE_SIZE := 14272k
DEVICE_VENDOR := RAVPower
DEVICE_MODEL := RP-WD009
UBOOT_PATH := $(STAGING_DIR_IMAGE)/mt7628_ravpower_rp-wd009-u-boot.bin
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci \
kmod-mmc-mtk kmod-i2c-mt7628 ravpower-mcu
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | ravpower-wd009-factory
endef
TARGET_DEVICES += ravpower_rp-wd009
define Device/skylab_skw92a
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Skylab
DEVICE_MODEL := SKW92A
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += skylab_skw92a
define Device/tama_w06
IMAGE_SIZE := 15040k
DEVICE_VENDOR := Tama
DEVICE_MODEL := W06
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += tama_w06
define Device/teltonika_rut9x1
DEVICE_VENDOR := Teltonika
DEVICE_MODEL := RUT951
DEVICE_ALT0_VENDOR := Teltonika
DEVICE_ALT0_MODEL := RUT901
SUPPORTED_TELTONIKA_DEVICES := teltonika,rut9m
SUPPORTED_TELTONIKA_HW_MODS := 2c7c_6005 TLA2021 CH343 esim ala440
IMAGE_SIZE := 15424k
BLOCKSIZE := 64k
DEVICE_PACKAGES := uqmi kmod-mt76x2 kmod-usb2 kmod-usb-ohci \
kmod-usb-serial-option kmod-spi-gpio kmod-gpio-nxp-74hc164 \
kmod-i2c-mt7628 kmod-usb-net-cdc-ether
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | check-size | append-teltonika-metadata
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
endef
TARGET_DEVICES += teltonika_rut9x1
define Device/teltonika_rut9x6
DEVICE_VENDOR := Teltonika
DEVICE_MODEL := RUT956
DEVICE_ALT0_VENDOR := Teltonika
DEVICE_ALT0_MODEL := RUT906
SUPPORTED_TELTONIKA_DEVICES := teltonika,rut9m
SUPPORTED_TELTONIKA_HW_MODS := 2c7c_6005 TLA2021 CH343 esim ala440
IMAGE_SIZE := 15424k
BLOCKSIZE := 64k
DEVICE_PACKAGES := uqmi kmod-mt76x2 kmod-usb2 kmod-usb-ohci \
kmod-usb-serial-option kmod-spi-gpio kmod-gpio-nxp-74hc164 kmod-i2c-mt7628 \
kmod-hwmon-mcp3021 kmod-scsi-core kmod-usb-storage kmod-usb-acm kmod-usb-net-cdc-ether
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | check-size | append-teltonika-metadata
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
endef
TARGET_DEVICES += teltonika_rut9x6
define Device/teltonika_rut976
DEVICE_VENDOR := Teltonika
DEVICE_MODEL := RUT976
SUPPORTED_TELTONIKA_DEVICES := teltonika,rut976
SUPPORTED_TELTONIKA_HW_MODS := 2c7c_6005 TLA2021 CH343 esim ala440
IMAGE_SIZE := 31552k
BLOCKSIZE := 64k
DEVICE_PACKAGES := uqmi kmod-mt76x2 kmod-usb2 kmod-usb-ohci \
kmod-usb-serial-option kmod-spi-gpio kmod-gpio-nxp-74hc164 kmod-i2c-mt7628 \
kmod-hwmon-mcp3021 kmod-scsi-core kmod-usb-storage kmod-usb-acm kmod-usb-net-cdc-ether
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | check-size | append-teltonika-metadata
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
endef
TARGET_DEVICES += teltonika_rut976
define Device/totolink_a3
IMAGE_SIZE := 7936k
UIMAGE_NAME := za3
DEVICE_VENDOR := TOTOLINK
DEVICE_MODEL := A3
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += totolink_a3
define Device/totolink_lr1200
IMAGE_SIZE := 7872k
DEVICE_VENDOR := TOTOLINK
DEVICE_MODEL := LR1200
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 uqmi
endef
TARGET_DEVICES += totolink_lr1200
define Device/tplink_archer-c20-v4
$(Device/tplink-v2)
IMAGE_SIZE := 7808k
DEVICE_MODEL := Archer C20
DEVICE_VARIANT := v4
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0xc200004
TPLINK_HWREVADD := 0x4
DEVICE_PACKAGES := kmod-mt76x0e
IMAGES := sysupgrade.bin tftp-recovery.bin
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
SUPPORTED_DEVICES += tplink,c20-v4
endef
TARGET_DEVICES += tplink_archer-c20-v4
define Device/tplink_archer-c20-v5
$(Device/tplink-v2)
IMAGE_SIZE := 7616k
DEVICE_MODEL := Archer C20
DEVICE_VARIANT := v5
TPLINK_FLASHLAYOUT := 8MSUmtk
TPLINK_HWID := 0xc200005
TPLINK_HWREVADD := 0x5
DEVICE_PACKAGES := kmod-mt76x0e
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += tplink_archer-c20-v5
define Device/tplink_archer-c50-v3
$(Device/tplink-v2)
IMAGE_SIZE := 7808k
DEVICE_MODEL := Archer C50
DEVICE_VARIANT := v3
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x001D9BA4
TPLINK_HWREV := 0x79
TPLINK_HWREVADD := 0x1
DEVICE_PACKAGES := kmod-mt76x2
IMAGES := sysupgrade.bin tftp-recovery.bin
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
SUPPORTED_DEVICES += tplink,c50-v3
endef
TARGET_DEVICES += tplink_archer-c50-v3
define Device/tplink_archer-c50-v4
$(Device/tplink-v2)
IMAGE_SIZE := 7616k
DEVICE_MODEL := Archer C50
DEVICE_VARIANT := v4
TPLINK_FLASHLAYOUT := 8MSUmtk
TPLINK_HWID := 0x001D589B
TPLINK_HWREV := 0x93
TPLINK_HWREVADD := 0x2
DEVICE_PACKAGES := kmod-mt76x2
IMAGES := sysupgrade.bin
SUPPORTED_DEVICES += tplink,c50-v4
endef
TARGET_DEVICES += tplink_archer-c50-v4
define Device/tplink_archer-c50-v6
$(Device/tplink-v2)
IMAGE_SIZE := 7616k
DEVICE_MODEL := Archer C50
DEVICE_VARIANT := v6 (CA/EU/RU)
DEVICE_ALT0_MODEL := Archer A5
DEVICE_ALT0_VARIANT := v6 (CA/EU/RU)
TPLINK_FLASHLAYOUT := 8MSUmtk
TPLINK_HWID := 0x0C500006
TPLINK_HWREVADD := 0x6
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7663-firmware-ap
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += tplink_archer-c50-v6
define Device/tplink_archer-mr200-v5
$(Device/tplink-v2)
IMAGE_SIZE := 7872k
DEVICE_MODEL := Archer MR200
DEVICE_VARIANT := v5
TPLINK_FLASHLAYOUT := 8MLmtk
TPLINK_HWID := 0x20000005
TPLINK_HWREV := 0x5
TPLINK_HWREVADD := 0x5
DEVICE_PACKAGES := kmod-mt76x0e uqmi kmod-usb2 kmod-usb-serial-option
IMAGES := sysupgrade.bin tftp-recovery.bin
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
endef
TARGET_DEVICES += tplink_archer-mr200-v5
define Device/tplink_archer-mr200-v6
$(Device/tplink-v2)
IMAGE_SIZE := 15936k
DEVICE_MODEL := Archer MR200
DEVICE_VARIANT := v6
TPLINK_FLASHLAYOUT := 16Mmtk
TPLINK_HWID := 0x20000006
TPLINK_HWREV := 0x6
TPLINK_HWREVADD := 0x6
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7663-firmware-ap \
kmod-usb2 kmod-usb-serial-option uqmi
KERNEL := kernel-bin | append-dtb | lzma -d22
KERNEL_INITRAMFS := kernel-bin | append-dtb
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += tplink_archer-mr200-v6
define Device/tplink_re200-v2
$(Device/tplink-safeloader)
IMAGE_SIZE := 7808k
DEVICE_MODEL := RE200
DEVICE_VARIANT := v2
DEVICE_PACKAGES := kmod-mt76x0e
TPLINK_BOARD_ID := RE200-V2
endef
TARGET_DEVICES += tplink_re200-v2
define Device/tplink_re200-v3
$(Device/tplink-safeloader)
IMAGE_SIZE := 7808k
DEVICE_MODEL := RE200
DEVICE_VARIANT := v3
DEVICE_PACKAGES := kmod-mt76x0e
TPLINK_BOARD_ID := RE200-V3
endef
TARGET_DEVICES += tplink_re200-v3
define Device/tplink_re200-v4
$(Device/tplink-safeloader)
IMAGE_SIZE := 7808k
DEVICE_MODEL := RE200
DEVICE_VARIANT := v4
DEVICE_PACKAGES := kmod-mt76x0e
TPLINK_BOARD_ID := RE200-V4
endef
TARGET_DEVICES += tplink_re200-v4
define Device/tplink_re205-v3
$(Device/tplink-safeloader)
IMAGE_SIZE := 7808k
DEVICE_MODEL := RE205
DEVICE_VARIANT := v3
DEVICE_PACKAGES := kmod-mt76x0e
TPLINK_BOARD_ID := RE205-V3
endef
TARGET_DEVICES += tplink_re205-v3
define Device/tplink_re220-v2
$(Device/tplink-safeloader)
IMAGE_SIZE := 7808k
DEVICE_MODEL := RE220
DEVICE_VARIANT := v2
DEVICE_PACKAGES := kmod-mt76x0e
TPLINK_BOARD_ID := RE220-V2
endef
TARGET_DEVICES += tplink_re220-v2
define Device/tplink_re305-v1
$(Device/tplink-safeloader)
IMAGE_SIZE := 7680k
KERNEL_SIZE := 6016k
DEVICE_MODEL := RE305
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt76x2
DEVICE_COMPAT_VERSION := 2.0
DEVICE_COMPAT_MESSAGE := Partition design has changed compared to older versions due to size restrictions and unsused flash. \
Upgrade via sysupgrade mechanism is not possible, so new installation via TFTP is required.
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
TPLINK_BOARD_ID := RE305-V1
endef
TARGET_DEVICES += tplink_re305-v1
define Device/tplink_re305-v3
$(Device/tplink-safeloader)
IMAGE_SIZE := 7808k
DEVICE_MODEL := RE305
DEVICE_VARIANT := v3
DEVICE_PACKAGES := kmod-mt76x2
TPLINK_BOARD_ID := RE305-V3
endef
TARGET_DEVICES += tplink_re305-v3
define Device/tplink_re365-v1
$(Device/tplink-safeloader)
DEVICE_MODEL := RE365
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt76x2
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
IMAGE_SIZE := 7680k
KERNEL_SIZE := 6016k
TPLINK_BOARD_ID := RE365
endef
TARGET_DEVICES += tplink_re365-v1
define Device/tplink_tl-mr3020-v3
$(Device/tplink-v2)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-MR3020
DEVICE_VARIANT := v3
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x30200003
TPLINK_HWREV := 0x3
TPLINK_HWREVADD := 0x3
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
IMAGES := sysupgrade.bin tftp-recovery.bin
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
endef
TARGET_DEVICES += tplink_tl-mr3020-v3
define Device/tplink_tl-mr3420-v5
$(Device/tplink-v2)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-MR3420
DEVICE_VARIANT := v5
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x34200005
TPLINK_HWREV := 0x5
TPLINK_HWREVADD := 0x5
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
IMAGES := sysupgrade.bin tftp-recovery.bin
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
endef
TARGET_DEVICES += tplink_tl-mr3420-v5
define Device/tplink_tl-mr6400-v4
$(Device/tplink-v2)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-MR6400
DEVICE_VARIANT := v4
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x64000004
TPLINK_HWREV := 0x4
TPLINK_HWREVADD := 0x4
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
kmod-usb-serial-option kmod-usb-net-qmi-wwan uqmi
IMAGES := sysupgrade.bin tftp-recovery.bin
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
endef
TARGET_DEVICES += tplink_tl-mr6400-v4
define Device/tplink_tl-mr6400-v5
$(Device/tplink-v2)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-MR6400
DEVICE_VARIANT := v5
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x64000005
TPLINK_HWREV := 0x5
TPLINK_HWREVADD := 0x5
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
kmod-usb-serial-option kmod-usb-net-qmi-wwan uqmi
IMAGES := sysupgrade.bin tftp-recovery.bin
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
endef
TARGET_DEVICES += tplink_tl-mr6400-v5
define Device/tplink_tl-wa801nd-v5
$(Device/tplink-v2)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WA801ND
DEVICE_VARIANT := v5
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08010005
TPLINK_HWREVADD := 0x5
IMAGES := sysupgrade.bin tftp-recovery.bin
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
endef
TARGET_DEVICES += tplink_tl-wa801nd-v5
define Device/tplink_tl-wr802n-v4
$(Device/tplink-v2)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR802N
DEVICE_VARIANT := v4
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08020004
TPLINK_HWREVADD := 0x4
IMAGES := sysupgrade.bin tftp-recovery.bin
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
endef
TARGET_DEVICES += tplink_tl-wr802n-v4
define Device/tplink_tl-wr840n-v4
$(Device/tplink-v2)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR840N
DEVICE_VARIANT := v4
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08400004
TPLINK_HWREVADD := 0x4
IMAGES := sysupgrade.bin tftp-recovery.bin
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
SUPPORTED_DEVICES += tl-wr840n-v4
endef
TARGET_DEVICES += tplink_tl-wr840n-v4
define Device/tplink_tl-wr840n-v5
$(Device/tplink-v2)
IMAGE_SIZE := 3904k
DEVICE_MODEL := TL-WR840N
DEVICE_VARIANT := v5
TPLINK_FLASHLAYOUT := 4Mmtk
TPLINK_HWID := 0x08400005
TPLINK_HWREVADD := 0x5
IMAGES := sysupgrade.bin
SUPPORTED_DEVICES += tl-wr840n-v5
DEFAULT := n
endef
TARGET_DEVICES += tplink_tl-wr840n-v5
define Device/tplink_tl-wr841n-v13
$(Device/tplink-v2)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR841N
DEVICE_VARIANT := v13
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08410013
TPLINK_HWREV := 0x268
TPLINK_HWREVADD := 0x13
IMAGES := sysupgrade.bin tftp-recovery.bin
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
SUPPORTED_DEVICES += tl-wr841n-v13
endef
TARGET_DEVICES += tplink_tl-wr841n-v13
define Device/tplink_tl-wr841n-v14
$(Device/tplink-v2)
IMAGE_SIZE := 3968k
DEVICE_MODEL := TL-WR841N
DEVICE_VARIANT := v14
TPLINK_FLASHLAYOUT := 4MLmtk
TPLINK_HWID := 0x08410014
TPLINK_HWREVADD := 0x14
IMAGES := sysupgrade.bin tftp-recovery.bin
IMAGE/tftp-recovery.bin := pad-extra 64k | $$(IMAGE/factory.bin)
DEFAULT := n
endef
TARGET_DEVICES += tplink_tl-wr841n-v14
define Device/tplink_tl-wr842n-v5
$(Device/tplink-v2)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR842N
DEVICE_VARIANT := v5
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08420005
TPLINK_HWREV := 0x5
TPLINK_HWREVADD := 0x5
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
IMAGES := sysupgrade.bin tftp-recovery.bin
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
endef
TARGET_DEVICES += tplink_tl-wr842n-v5
define Device/tplink_tl-wr850n-v2
$(Device/tplink-v2)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR850N
DEVICE_VARIANT := v2
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08500002
TPLINK_HWREVADD := 0x2
IMAGES := sysupgrade.bin tftp-recovery.bin
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
endef
TARGET_DEVICES += tplink_tl-wr850n-v2
define Device/tplink_tl-wr902ac-v3
$(Device/tplink-v2)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR902AC
DEVICE_VARIANT := v3
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x000dc88f
TPLINK_HWREV := 0x89
TPLINK_HWREVADD := 0x1
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci \
kmod-usb-ledtrig-usbport
IMAGES := sysupgrade.bin tftp-recovery.bin
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
endef
TARGET_DEVICES += tplink_tl-wr902ac-v3
define Device/tplink_tl-wr902ac-v4
$(Device/tplink-v2)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR902AC
DEVICE_VARIANT := v4
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x000dc88f
TPLINK_HWREV := 0x89
TPLINK_HWREVADD := 0x1
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7663-firmware-ap kmod-usb2 kmod-usb-ohci \
kmod-usb-ledtrig-usbport
IMAGES := sysupgrade.bin tftp-recovery.bin
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
endef
TARGET_DEVICES += tplink_tl-wr902ac-v4
define Device/unielec_u7628-01-16m
IMAGE_SIZE := 16064k
DEVICE_VENDOR := UniElec
DEVICE_MODEL := U7628-01
DEVICE_VARIANT := 16M
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += u7628-01-128M-16M unielec,u7628-01-128m-16m
endef
TARGET_DEVICES += unielec_u7628-01-16m
define Device/vocore_vocore2
IMAGE_SIZE := 16064k
DEVICE_VENDOR := VoCore
DEVICE_MODEL := VoCore2
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
kmod-mmc-mtk
SUPPORTED_DEVICES += vocore2
endef
TARGET_DEVICES += vocore_vocore2
define Device/vocore_vocore2-lite
IMAGE_SIZE := 7872k
DEVICE_VENDOR := VoCore
DEVICE_MODEL := VoCore2-Lite
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
kmod-mmc-mtk
SUPPORTED_DEVICES += vocore2lite
endef
TARGET_DEVICES += vocore_vocore2-lite
define Device/wavlink_wl-wn531a3
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WL-WN531A3
DEVICE_ALT0_VENDOR := Wavlink
DEVICE_ALT0_MODEL := QUANTUM D4
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci
SUPPORTED_DEVICES += wl-wn531a3
endef
TARGET_DEVICES += wavlink_wl-wn531a3
define Device/wavlink_wl-wn570ha1
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WL-WN570HA1
DEVICE_PACKAGES := kmod-mt76x0e
endef
TARGET_DEVICES += wavlink_wl-wn570ha1
define Device/wavlink_wl-wn570ha2
IMAGE_SIZE := 15488k
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WL-WN570HA2
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7663-firmware-ap kmod-mt7603
endef
TARGET_DEVICES += wavlink_wl-wn570ha2
define Device/wavlink_wl-wn575a3
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WL-WN575A3
DEVICE_PACKAGES := kmod-mt76x2
SUPPORTED_DEVICES += wl-wn575a3
endef
TARGET_DEVICES += wavlink_wl-wn575a3
define Device/wavlink_wl-wn576a2
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WL-WN576A2
DEVICE_ALT0_VENDOR := Silvercrest
DEVICE_ALT0_MODEL := SWV 733 B1
DEVICE_PACKAGES := kmod-mt76x0e
endef
TARGET_DEVICES += wavlink_wl-wn576a2
define Device/wavlink_wl-wn577a2
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WL-WN577A2
DEVICE_ALT0_VENDOR := Maginon
DEVICE_ALT0_MODEL := WLR-755
DEVICE_PACKAGES := kmod-mt76x0e
endef
TARGET_DEVICES += wavlink_wl-wn577a2
define Device/wavlink_wl-wn578a2
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WL-WN578A2
DEVICE_ALT0_VENDOR := SilverCrest
DEVICE_ALT0_MODEL := SWV 733 A2
DEVICE_PACKAGES := kmod-mt76x0e
endef
TARGET_DEVICES += wavlink_wl-wn578a2
define Device/widora_neo-16m
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Widora
DEVICE_MODEL := Widora-NEO
DEVICE_VARIANT := 16M
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
SUPPORTED_DEVICES += widora-neo
endef
TARGET_DEVICES += widora_neo-16m
define Device/widora_neo-32m
IMAGE_SIZE := 32448k
DEVICE_VENDOR := Widora
DEVICE_MODEL := Widora-NEO
DEVICE_VARIANT := 32M
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += widora_neo-32m
define Device/wiznet_wizfi630s
IMAGE_SIZE := 32448k
DEVICE_VENDOR := WIZnet
DEVICE_MODEL := WizFi630S
SUPPORTED_DEVICES += wizfi630s
endef
TARGET_DEVICES += wiznet_wizfi630s
define Device/wodesys_wd-r1208u
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Wodesys
DEVICE_MODEL := WD-R1208U
DEVICE_PACKAGES := kmod-mt76x2
SUPPORTED_DEVICES += mtk-apsoc-demo
endef
TARGET_DEVICES += wodesys_wd-r1208u
define Device/wrtnode_wrtnode2p
IMAGE_SIZE := 32448k
DEVICE_VENDOR := WRTnode
DEVICE_MODEL := WRTnode 2P
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += wrtnode2p
endef
TARGET_DEVICES += wrtnode_wrtnode2p
define Device/wrtnode_wrtnode2r
IMAGE_SIZE := 32448k
DEVICE_VENDOR := WRTnode
DEVICE_MODEL := WRTnode 2R
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
SUPPORTED_DEVICES += wrtnode2r
endef
TARGET_DEVICES += wrtnode_wrtnode2r
define Device/xiaomi_mi-router-4a-100m
IMAGE_SIZE := 14976k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router 4A
DEVICE_VARIANT := 100M Edition
DEVICE_PACKAGES := kmod-mt76x2
SUPPORTED_DEVICES += xiaomi,mir4a-100m
endef
TARGET_DEVICES += xiaomi_mi-router-4a-100m
define Device/xiaomi_mi-router-4a-100m-intl
IMAGE_SIZE := 14976k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router 4A
DEVICE_VARIANT := 100M International Edition
DEVICE_PACKAGES := kmod-mt76x2
SUPPORTED_DEVICES += xiaomi,mir4a-100m-intl
endef
TARGET_DEVICES += xiaomi_mi-router-4a-100m-intl
define Device/xiaomi_mi-router-4a-100m-intl-v2
IMAGE_SIZE := 14976k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router 4A
DEVICE_VARIANT := 100M International Edition V2
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7663-firmware-ap
endef
TARGET_DEVICES += xiaomi_mi-router-4a-100m-intl-v2
define Device/xiaomi_mi-router-4c
IMAGE_SIZE := 14976k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router 4C
DEVICE_PACKAGES := uboot-envtools
endef
TARGET_DEVICES += xiaomi_mi-router-4c
define Device/xiaomi_miwifi-3a
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := MiWiFi 3A
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += xiaomi_miwifi-3a
define Device/xiaomi_miwifi-3c
IMAGE_SIZE := 15104k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := MiWiFi 3C
DEVICE_PACKAGES := uboot-envtools
endef
TARGET_DEVICES += xiaomi_miwifi-3c
define Device/xiaomi_miwifi-nano
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := MiWiFi Nano
DEVICE_PACKAGES := uboot-envtools
SUPPORTED_DEVICES += miwifi-nano
endef
TARGET_DEVICES += xiaomi_miwifi-nano
define Device/xiaomi_mi-ra75
IMAGE_SIZE := 14976k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := MiWiFi Range Extender AC1200
DEVICE_VARIANT := RA75
DEVICE_PACKAGES := kmod-mt76x2
SUPPORTED_DEVICES += xiaomi,mira75
endef
TARGET_DEVICES += xiaomi_mi-ra75
define Device/yuncore_cpe200
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Yuncore
DEVICE_MODEL := CPE200
DEVICE_PACKAGES := -kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap kmod-mt7663-firmware-sta
endef
TARGET_DEVICES += yuncore_cpe200
define Device/yuncore_m300
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Yuncore
DEVICE_MODEL := M300
endef
TARGET_DEVICES += yuncore_m300
define Device/zbtlink_zbt-we1226
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WE1226
endef
TARGET_DEVICES += zbtlink_zbt-we1226
define Device/zbtlink_zbt-we2426-b
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WE2426-B
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += zbtlink_zbt-we2426-b
define Device/zyxel_keenetic-extra-ii
IMAGE_SIZE := 29824k
DEVICE_VENDOR := Zyxel
DEVICE_MODEL := Keenetic Extra II
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci \
kmod-usb-ledtrig-usbport
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to $$$$(BLOCKSIZE) | \
check-size | zyimage -d 6162 -v "ZyXEL Keenetic Extra II"
endef
TARGET_DEVICES += zyxel_keenetic-extra-ii
define Device/teltonika_rut200
DEVICE_VENDOR := Teltonika
DEVICE_MODEL := RUT200
DEVICE_VARIANT := v1-v4
SUPPORTED_TELTONIKA_DEVICES := teltonika,rut2m
IMAGE_SIZE := 15424k
BLOCKSIZE := 64k
DEVICE_PACKAGES +=kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-usb-serial-option kmod-usb-net-cdc-ether
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-teltonika-metadata
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
endef
TARGET_DEVICES += teltonika_rut200
define Device/teltonika_rut241
DEVICE_VENDOR := Teltonika
DEVICE_MODEL := RUT241
DEVICE_VARIANT := v1-v4
SUPPORTED_TELTONIKA_DEVICES := teltonika,rut2m
IMAGE_SIZE := 15424k
BLOCKSIZE := 64k
DEVICE_PACKAGES += uqmi kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-usb-serial-option
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-teltonika-metadata
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
endef
TARGET_DEVICES += teltonika_rut241
View git blame Copy permalink