Mathias Kresin d8b475212b lantiq: kernel 4.14: use vbus-supply devicetree property ... It isn't a phy supply, as the phy is still up if the GPIO is low. It rather is the supply for the vbus. A correct setting/definition will be relevant as soon as USB peripheral mode is supported. Signed-off-by: Mathias Kresin <dev@kresin.me>		2018-05-17 07:40:19 +02:00
..
ase	lantiq: switch to kernel 4.14	2018-05-17 07:40:19 +02:00
base-files	lantiq: complete AVM FRITZ!Box 3370 support	2018-05-17 07:40:19 +02:00
falcon	lantiq: switch to kernel 4.14	2018-05-17 07:40:19 +02:00
files/firmware/lantiq	lantiq: rename gphy firmware	2018-02-20 19:25:17 +01:00
files-4.14/arch/mips/boot/dts	lantiq: kernel 4.14: use vbus-supply devicetree property	2018-05-17 07:40:19 +02:00
image	lantiq: complete AVM FRITZ!Box 3370 support	2018-05-17 07:40:19 +02:00
patches-4.14	lantiq: kernel 4.14: Remove reboot/remove reset asserts	2018-05-07 18:53:08 +02:00
xrx200	lantiq: switch to kernel 4.14	2018-05-17 07:40:19 +02:00
xway	lantiq: switch to kernel 4.14	2018-05-17 07:40:19 +02:00
xway_legacy	lantiq: switch to kernel 4.14	2018-05-17 07:40:19 +02:00
config-4.14	kernel: optimize for performance by default starting with 4.14	2018-02-24 16:05:28 +01:00
Makefile	lantiq: switch to kernel 4.14	2018-05-17 07:40:19 +02:00
modules.mk	fix i2c-lantiq module	2012-12-16 10:03:18 +00:00