openwrt

No description

Find a file

INAGAKI Hiroshi a79f55e7e0 ramips: add support for ELECOM WRC-1750GS/GSV ELECOM WRC-1750GS is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. WRC-1750GSV has the same hardware with WRC-1750GS. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB - Flash : SPI-NOR 16 MiB - WLAN : 2.4/5 GHz 3T3R (2x MediaTek MT7615) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LED/keys : 4x/6x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J4: 3.3V, GND, TX, RX from ethernet port side - 57600n8 - Power : 12VDC, 1.5A Flash instruction using factory image: 1. Boot WRC-1750GS (or WRC-1750GSV) normally 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button for WRC-1750GS : wrc-1750gs-squashfs-factory.bin for WRC-1750GSV: wrc-1750gsv-squashfs-factory.bin 4. Wait ~120 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		2020-07-16 13:39:44 +02:00
.github	build: Update README & github help	2018-07-08 09:41:53 +01:00
config	build: improve ccache support	2020-07-11 15:19:53 +02:00
include	build: improve ccache support	2020-07-11 15:19:53 +02:00
package	base-files: replace backticks in lib/upgrade/nand.sh	2020-07-15 18:33:56 +02:00
scripts	build,json: fix compatibility with Python 3.5	2020-07-13 22:45:04 +02:00
target	ramips: add support for ELECOM WRC-1750GS/GSV	2020-07-16 13:39:44 +02:00
toolchain	glibc: fix avx2 strncmp offset compare condition check [BZ #25933 ]	2020-07-13 22:40:22 +02:00
tools	firmware-utils: mkfwimage: fix memcpy and strncpy usage	2020-07-11 13:33:28 +02:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	build: improve ccache support	2020-07-11 15:19:53 +02:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	merge: base: update base-files and basic config	2017-12-08 19:41:18 +01:00
feeds.conf.default	feeds: add freifunk feed	2020-06-24 14:58:17 +02:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	build: improve ccache support	2020-07-11 15:19:53 +02:00
README	build: switch to Python 3	2019-07-26 08:09:16 +02:00
rules.mk	build: improve ccache support	2020-07-11 15:19:53 +02:00

README

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org