forked from mirror/openwrt
b8eba75146
Specification: SoC: MediaTek MT7628AN RAM: 128 MB, Zentel A3R1GE40JBF-8E Flash: 16MB, Winbond W25Q128JV Switch: rt3050-esw, 2 ports 100 Mbps WiFi: MediaTek mt7628-wmac 2.4GHz 802.11n and MediaTek MT7663 5GHz 802.11ac (PCIe) WWAN: Quectel EC200A-EL 4G modem (USB) GPIO: * 1 button (Reset/WPS) * 6 LEDs (Power+WPS, LAN, 3xSignal) * USB port power controls * Modem reset * Modem programming switch * Internal/external antenna switch for 4G Serial Interface: TP10 - 3.3V can be used for level shifter, if needed TP9 - TX TP8 - RX TP11 - GND Interface properties: 115200, 8N1 Access to console using serial port for OEM firmware: Username: admin Password: 1234 Flashing via TFTP (no disassembling or soldering required): 1. Connect your PC and router to port LAN 2. Configure PC interface using static IP 192.168.1.225, mask 255.255.255.0 3. Place OpenWRT firmware image (*-squashfs-tftp-recovery.bin) to TFTP root folder and renamed it to tp_recovery.bin 4. Unplug power from router 5. Press and hold Reset/WPS button 6. Power up the router 7. Wait until TFTP started uploading image (~10 seconds after power up) and release Reset/WPS button 8. Wait until image uploaded, i.e. until LAN LED start lighting 9. Enable DHCP address on PC interface and wait for assigning address 10. Use ssh (root@192.168.1.1) to configure router properties Depends on patch for firmware-utils package: https://github.com/openwrt/firmware-utils/commit/2051fe5b Signed-off-by: Sergii Shcherbakov <shchers@gmail.com> Link: https://github.com/openwrt/openwrt/pull/17819 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> |
||
|---|---|---|
| .. | ||
| base-files/etc | ||
| dts | ||
| files/drivers | ||
| image | ||
| mt76x8 | ||
| mt7620 | ||
| mt7621 | ||
| patches-6.6 | ||
| rt288x | ||
| rt305x | ||
| rt3883 | ||
| Makefile | ||
| modules.mk | ||