arne/openwrt
1
0
Fork 0
forked from mirror/openwrt
Code Pull requests Activity
No description
38041 commits 2 branches 82 tags 253 MiB
Find a file
Florian Beier 9740523763 ar71xx: fix LED config for DIR-869 A1 
This fixes the LED configuration for the D-Link DIR-869 A1. In order to
support the device I probed around using an initramfs image for the
UniFi AC. Pulling GPIO 15 to low enabled the LEDs while high disabled them.
GPIO 16 set to low meant that the color was white while pulling it to high
made the color change to orange. The past code was written based upon these
findings.
However, running a flashed image I now discovered that GPIO 15 controls the
orange LEDs while GPIO 16 controls the white ones and that both are active
when low. This means that the GPIOs were inverted and one active_low was set
wrong which this patch fixes.

Behavior of the LED front after this patch is applied:

cat /sys/devices/platform/leds-gpio/leds/d-link:white:status/brightness
0   -> white LEDs are OFF
255 -> white LEDs are ON

cat /sys/devices/platform/leds-gpio/leds/d-link🍊status/brightness
0   -> orange LEDs are OFF
255 -> orange LEDs are ON

If the brightness of both is set to 255 the LED front will be white.
If the brightness of both is set to 0 the LED front will be off.

Signed-off-by: Florian Beier <beier.florian@gmail.com>
2017-11-03 22:59:20 +01:00
.github Add Issue submission template (redirect to bugs.lede-project.org) 2016-09-01 09:01:04 -04:00
config x86: Set default baud rate on Geode images to 115200 2017-02-17 10:30:30 +01:00
include kernel: bump 4.4 to 4.4.93 for 17.01 2017-10-18 19:58:02 +03:00
package uclient: update to the latest version, fixes fetch of multiple files 2017-11-03 10:56:47 +01:00
scripts treewide: fix shellscript syntax errors/typos 2017-09-13 08:07:39 +02:00
target ar71xx: fix LED config for DIR-869 A1 2017-11-03 22:59:20 +01:00
toolchain toolchain/gdb: update to version 8.0.1 2017-10-05 21:38:54 +02:00
tools tools/squashfs4: include sysmacros.h explicitly 2017-10-25 18:50:27 +02:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore gitignore: add /overlay 2017-01-15 18:16:29 +01:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in branding: add LEDE branding 2016-03-24 22:40:13 +01:00
feeds.conf.default LEDE v17.01.4: revert to branch defaults 2017-10-18 11:54:32 +03:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile Makefile: ensure that BIN_DIR exists for diffconfig 2017-01-08 18:50:00 +01:00
README README: Update project README 2016-05-12 03:29:36 +02:00
rules.mk build: use mkhash to replace various quirky md5sum/openssl calls 2017-01-05 11:09:12 +01:00

README 

This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your LEDE Community
	http://www.lede-project.org