forked from mirror/openwrt
d2beb6bdc4
Registers must not be accessed in parallel by multiple drivers.
Read-modify-write operations are not atomic, and the result of parallel
access is undefined.
The MAC_L2_GLOBAL_CTRL2 register is essentially a pin configuration
register and is represented by a pinmux node in the devicetree. Operations
on this register by the realtek,rtl838x-eth driver must therefore also be
reflected in the devicetree.
Since the MDIO sets used are board-specific, the pins must be enabled in
the board’s devicetree. This can be achieved using the pinctrl properties
for the realtek,rtl83xx-switch.
&switch0 {
pinctrl-names = "default";
pinctrl-0 = <&pinmux_enable_mdc_mdio_0>,
<&pinmux_enable_mdc_mdio_1>;
....
};
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Link: https://github.com/openwrt/openwrt/pull/19815
Signed-off-by: Robert Marko <robimarko@gmail.com>
|
||
|---|---|---|
| .. | ||
| base-files | ||
| dts | ||
| files/firmware/rtl838x_phy | ||
| files-6.12 | ||
| image | ||
| patches-6.12 | ||
| profiles | ||
| rtl838x | ||
| rtl839x | ||
| rtl930x | ||
| rtl930x_nand | ||
| rtl931x | ||
| rtl931x_nand | ||
| Makefile | ||