Baptiste Jonglez f5b3cd1539 ar71xx: Fix gigabit switch support for Mikrotik RB951G-2HnD ... Without this patch, when using rev 3 of the Atheros AR9344 SoC, the gigabit switch (AR8327) does not work or works very erratically. This is a re-spin of http://patchwork.ozlabs.org/patch/419857/ with a different PLL value, according to the feedback from several users (including myself) as shown here: https://openwrt.org/toh/mikrotik/rb2011uias#tracking_reported_experience_with_suggested_patch_for_the_5_gige_ports Performance is acceptable: testing L3 forwarding without NAT yields a performance of 370 Mbit/s (iperf3 TCP) and 41 Kpps (iperf3 UDP with 64 bytes payload). Both tests show that 100% of CPU time is spent on softirq. A similar fix for a different device (RB2011) was added in e457d22261 ("Make GBit switch work on RB2011"). Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org> (cherry picked from commit 247043c968)		2020-03-28 13:46:26 +01:00
..
base-files	ar71xx: use status led for GL.iNet GL-AR750S	2020-03-26 20:00:36 +01:00
files	ar71xx: Fix gigabit switch support for Mikrotik RB951G-2HnD	2020-03-28 13:46:26 +01:00
generic	ar71xx: add support for Gainstrong MiniBox V3.2	2018-11-15 19:49:51 +01:00
image	ar71xx: change u-boot-env to read-write for gl-ar150/-domino/mifi	2020-01-23 14:33:21 +01:00
mikrotik	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
nand	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
patches-4.14	kernel: bump 4.14 to 4.14.171	2020-02-24 14:20:14 +01:00
tiny	ar71xx: move OCEDO Koala to generic and use dynamic partitioning	2018-10-29 11:21:23 +01:00
config-4.14	ar71xx: add support for Gainstrong MiniBox V3.2	2018-11-15 19:49:51 +01:00
Makefile	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
modules.mk	ar71xx: add LED driver NU801	2015-12-11 15:04:57 +00:00