arne/openwrt
1
0
Fork 0
forked from mirror/openwrt
Code Pull requests Activity
openwrt/target/linux/mediatek/dts
History
Zhenfu Shi 41106141b8 mediatek: filogic: support WAVLINK WL-WN586X3 Rev B 
This commit adds support for the WAVLINK WL-WN586X3 Rev B, which swaps
the 16MB NOR flash for an 128MB NAND flash chip, and uses UBI for
data partition. This commit utilizes the previous submitted dtsi that
includes common hardware for a few Wavlink routers.

Hardware
--------
- SOC: MediaTek MT7981B
- RAM: 256MB DDR3
- Flash: 128MB SPI-NAND (ESMT F50L1G41LB)
- Ethernet: 2x1Gb Lan 1x1Gb Wan
- WiFi: MediaTek MT7981B 2x2 DBDC 802.11ax 2T2R (2.4/5) with 4 external and 1 internal antennae
- LEDs: 2xLan 1x Wan 1x WIFI 1xSTATUS

Installation
------------
Flashing over the vendor WebUI has been tested and unsuccessful (YMMV).
The image need to be flashed via TFTP which can be activated over the onboard UART serial console:
1. Connect UART:  TX->board RX, RX->board TX, GND->board GND.
2. Connect PC to router lan port.
3. Setup the tftp server on PC, set IP to 192.168.10.100.
4. Power on the device. Interrupt boot countdown at uboot boot menu and select 2. Upgrade firmware option.
5. Input the image name and start flashing.

Sample uboot menu:
```
  *** U-Boot Boot Menu ***

      1. Startup system (Default)
      2. Upgrade firmware
      3. Upgrade ATF BL2
      4. Upgrade ATF FIP
      5. Upgrade single image
      6. Load image
      0. U-Boot console
```

NOTE: Do not use the intermediate image here which is for Rev A only:
https://github.com/themaverickdm/firmware-misc/tree/main/wavlink/wl-wn586x3

MAC Addresses
-------------
LAN: 80:3F:5D:xx:xx:x1 (hw, 0x44e, ASCII encoded)
WAN: 80:3F:5D:xx:xx:x2 (hw, 0x460, ASCII encoded)
 2G: 80:3F:5D:xx:xx:x3 (factory, 0x4, raw binary, also on label)
 5G: 80:3F:5D:xx:xx:x3 (Same as 2G)

Signed-off-by: Zhenfu Shi <i0ntempest@i0ntempest.com>
Link: https://github.com/openwrt/openwrt/pull/19785
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-08-24 15:50:46 +02:00
..
mt7622-buffalo-wsr-2533dhp2.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7622-buffalo-wsr-3200ax4s.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7622-buffalo-wsr.dtsi mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7622-dlink-eagle-pro-ai-ax3200-a1.dtsi mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7622-dlink-eagle-pro-ai-m32-a1.dts mediatek: Add support for D-Link EAGLE PRO AI R32 2024-01-02 21:22:46 +01:00
mt7622-dlink-eagle-pro-ai-r32-a1.dts mediatek: Add support for D-Link EAGLE PRO AI R32 2024-01-02 21:22:46 +01:00
mt7622-elecom-wrc-2533gent.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7622-elecom-wrc-x3200gst3.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7622-linksys-e8450-ubi.dts mediatek: fix wrong compatible string 2024-10-06 21:56:04 +02:00
mt7622-linksys-e8450.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-linksys-e8450.dtsi mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7622-netgear-wax206.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7622-reyee-ax3200-e5.dts mediatek: Update mt7622-reyee-ax3200-e5.dts 2025-03-15 13:48:00 +01:00
mt7622-rfb1-ubi.dts mediatek: re-enable mt7622-rfb1-ubi with changed partition layout 2024-02-28 09:59:43 +01:00
mt7622-ruijie-rg-ew3200.dtsi mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7622-ruijie-rg-ew3200gx-pro.dts mediatek: also move &slot0 from dtsi down to board dts 2022-12-07 01:45:14 +00:00
mt7622-smartrg-SDG-841-t6.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7622-totolink-a8000ru.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7622-ubnt-unifi-6-lr-v1-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v1.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v1.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr-v2-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v2.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v2.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr-v3-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v3.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v3.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr.dtsi mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7622-xiaomi-redmi-router-ax6s.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7623a-unielec-u7623-02-emmc-512m.dts mediatek: u7623-02: enable early console also in legacy image 2022-01-31 00:10:38 +00:00
mt7623a-unielec-u7623-02.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7623a-unielec-u7623-02.dtsi mediatek: mt7623: fix mmc dtc warnings 2025-05-19 20:01:00 +08:00
mt7629-iptime-a6004mx.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7629-linksys-ea7500-v3.dts mediatek: Add support for Linksys EA7500 v3 2024-08-15 00:13:20 +02:00
mt7629-netgear-ex6250-v2.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7629-tplink_eap225-v5.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981a-comfast-cf-e393ax.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981a-edgecore-eap111.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981a-glinet-gl-x3000-xe3000-common.dtsi mediatek: dts: convert pinctrl bias to the Linux generic style 2025-08-24 13:22:08 +02:00
mt7981a-glinet-gl-x3000.dts mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX) 2024-03-13 20:47:23 +00:00
mt7981a-glinet-gl-xe3000.dts mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX) 2024-03-13 20:47:23 +00:00
mt7981a-ubnt-unifi-6-plus.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-abt-asr3000.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-asus-rt-ax52.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-cetron-ct3003.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-cmcc-a10-stock.dts mediatek: add support for CMCC A10 2025-03-08 15:44:56 +01:00
mt7981b-cmcc-a10-ubootmod.dts mediatek: add support for CMCC A10 2025-03-08 15:44:56 +01:00
mt7981b-cmcc-a10.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-cmcc-rax3000m-emmc.dtso mediatek: filogic: fix mmc dtc warnings 2025-05-19 20:00:59 +08:00
mt7981b-cmcc-rax3000m-nand.dtso mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-cmcc-rax3000m.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-confiabits-mt7981.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-creatlentem-clt-r30b1-112m.dts mediatek: add support for CreatLentem CLT-R30B1 2025-08-08 18:12:50 +02:00
mt7981b-creatlentem-clt-r30b1-common.dtsi mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-creatlentem-clt-r30b1.dts mediatek: add support for CreatLentem CLT-R30B1 2025-08-08 18:12:50 +02:00
mt7981b-cudy-ap3000-v1.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-cudy-ap3000outdoor-v1.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-cudy-m3000-v1.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-cudy-re3000-v1.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-cudy-tr3000-256mb-v1.dts mediatek: add support for Cudy TR3000 256MB v1 flash version 2025-06-22 19:17:25 +02:00
mt7981b-cudy-tr3000-v1-ubootmod.dts mediatek: add ubootmod layout for cudy tr3000 v1 2025-05-27 19:56:55 +08:00
mt7981b-cudy-tr3000-v1.dts mediatek: add ubootmod layout for cudy tr3000 v1 2025-05-27 19:56:55 +08:00
mt7981b-cudy-tr3000-v1.dtsi mediatek: add ubootmod layout for cudy tr3000 v1 2025-05-27 19:56:55 +08:00
mt7981b-cudy-wr3000-nand.dtsi mediatek: Create common DTSI for WR3000H and WR3000S 2025-06-05 21:13:24 +02:00
mt7981b-cudy-wr3000-v1.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-cudy-wr3000e-v1.dts mediatek: filogic: add support for Cudy WR3000E v1 2025-06-07 18:07:03 +02:00
mt7981b-cudy-wr3000h-v1.dts mediatek: Create common DTSI for WR3000H and WR3000S 2025-06-05 21:13:24 +02:00
mt7981b-cudy-wr3000s-v1.dts mediatek: Create common DTSI for WR3000H and WR3000S 2025-06-05 21:13:24 +02:00
mt7981b-dlink-aquila-pro-ai-m30-a1.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-elecom-wrc-x3000gs3.dts mediatek: add missing #address/size-cells for ELECOM WRC-X3000GS3 2025-07-26 15:41:23 +02:00
mt7981b-gatonetworks-gdsp-gps.dtso mediatek: filogic: add SD card support to GatoNetworks GDSP 2025-07-18 12:36:39 +01:00
mt7981b-gatonetworks-gdsp-sd-boot.dtso mediatek: dts: fix some minor dtc warnings 2025-08-24 13:22:09 +02:00
mt7981b-gatonetworks-gdsp-sd.dtso mediatek: filogic: add SD card support to GatoNetworks GDSP 2025-07-18 12:36:39 +01:00
mt7981b-gatonetworks-gdsp.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-glinet-gl-mt2500-v1.dts mediatek: filogic: fix for new GL.iNet GL-MT2500/GL-MT2500A hardware revision 2025-06-03 23:19:35 +02:00
mt7981b-glinet-gl-mt2500-v2.dts mediatek: filogic: fix for new GL.iNet GL-MT2500/GL-MT2500A hardware revision 2025-06-03 23:19:35 +02:00
mt7981b-glinet-gl-mt2500.dtsi mediatek: dts: convert pinctrl bias to the Linux generic style 2025-08-24 13:22:08 +02:00
mt7981b-glinet-gl-mt3000.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-h3c-magic-nx30-pro.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-huasifei-wh3000-pro.dts mediatek: add Huasifei WH3000 Pro support 2025-07-12 19:31:54 +02:00
mt7981b-huasifei-wh3000.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-iptime-ax3000q.dts mediatek: dts: fix some minor dtc warnings 2025-08-24 13:22:09 +02:00
mt7981b-iptime-ax3000sm.dts mediatek: dts: fix some minor dtc warnings 2025-08-24 13:22:09 +02:00
mt7981b-jcg-q30-pro.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-keenetic-kn-3811.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-keenetic-kn-3911.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-mercusys-mr80x-v3.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-netis-nx31.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-nokia-ea0326gmp.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-nradio-c8-668gl.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-openembed-som7981.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-openfi-6c.dts mediatek: add support for OpenFi 6C 2025-08-07 18:17:10 +02:00
mt7981b-openwrt-one.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-qihoo-360t7.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-routerich-ax3000-common.dtsi mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-routerich-ax3000-ubootmod.dts mediatek: Routerich AX3000: add OpenWrt U-Boot layout 2024-11-24 23:41:02 +01:00
mt7981b-routerich-ax3000-v1.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-routerich-ax3000.dts mediatek: Routerich AX3000: add OpenWrt U-Boot layout 2024-11-24 23:41:02 +01:00
mt7981b-snr-snr-cpe-ax2.dts mediatek: dts: remove some useless spaces 2025-08-24 13:22:09 +02:00
mt7981b-tenbay-wr3000k.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-tplink-fr365v1.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-unielec-u7981-01-emmc.dts mediatek: filogic: fix mmc dtc warnings 2025-05-19 20:00:59 +08:00
mt7981b-unielec-u7981-01-nand.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-unielec-u7981-01.dtsi mediatek: remove loglevel in bootargs 2025-08-11 10:40:26 +02:00
mt7981b-wavlink-wl-3port-128nand-common.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-wavlink-wl-wn551x3.dts mediatek: dts: remove some useless spaces 2025-08-24 13:22:09 +02:00
mt7981b-wavlink-wl-wn573hx3.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-wavlink-wl-wn586x3.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-wavlink-wl-wn586x3b.dts mediatek: filogic: support WAVLINK WL-WN586X3 Rev B 2025-08-24 15:50:46 +02:00
mt7981b-xiaomi-mi-router-ax3000t-ubootmod.dts mediatek: filogic: convert Xiaomi AX3000T to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-xiaomi-mi-router-ax3000t.dts mediatek: fix nmbm configuration mismatch (Xiaomi AX3000t) 2025-02-07 09:04:35 +01:00
mt7981b-xiaomi-mi-router-ax3000t.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-xiaomi-mi-router-common.dtsi mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-xiaomi-mi-router-wr30u-stock.dts mediatek: filogic: add support for Xiaomi WR30U 2023-07-27 13:46:16 +02:00
mt7981b-xiaomi-mi-router-wr30u-ubootmod.dts mediatek: filogic: convert Xiaomi WR30U to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-xiaomi-mi-router-wr30u.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-yuncore-ax835.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-zbtlink-zbt-z8102ax-v2.dts mediatek: dts: remove some useless spaces 2025-08-24 13:22:09 +02:00
mt7981b-zbtlink-zbt-z8102ax.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-zbtlink-zbt-z8103ax.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-zyxel-nwa50ax-pro.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7986a-acelink-ew-7886cax.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-acer-predator-w6.dts mediatek: filogic: PHY LEDs do have an address, gpio-leds don't 2025-03-21 01:19:19 +00:00
mt7986a-acer-predator-w6d.dts mediatek: filogic: PHY LEDs do have an address, gpio-leds don't 2025-03-21 01:19:19 +00:00
mt7986a-acer-predator-w6x.dts mediatek: dts: remove mt7531 switch reset delay time properties 2025-08-24 13:22:09 +02:00
mt7986a-acer-vero-w6m.dts mediatek: add support for Acer Predator W6d and Acer Vero W6m 2024-11-23 19:33:42 +01:00
mt7986a-acer-w6-common.dtsi mediatek: dts: remove mt7531 switch reset delay time properties 2025-08-24 13:22:09 +02:00
mt7986a-asus-rt-ax59u.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-asus-tuf-ax4200.dts mediatek: dts: remove mt7531 switch reset delay time properties 2025-08-24 13:22:09 +02:00
mt7986a-asus-tuf-ax6000.dts mediatek: dts: remove mt7531 switch reset delay time properties 2025-08-24 13:22:09 +02:00
mt7986a-bananapi-bpi-r3-mini.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-dlink-aquila-pro-ai-m60-a1.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-glinet-gl-mt6000.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-jdcloud-re-cp-03.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-netcore-n60-pro.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-netcore-n60.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-ruijie-rg-x60-pro.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-smartrg-bonanza-peak.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-smartrg-SDG-8612.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8614.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8622.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8632.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-tplink-archer-ax80-v1.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-tplink-tl-xdr-common.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-tplink-tl-xdr4288.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-tplink-tl-xdr6086.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-tplink-tl-xdr6088.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-tplink-tl-xtr8488.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-xiaomi-redmi-router-ax6000-stock.dts mediatek: add new layout for Xiaomi Redmi Router AX6000 for OpenWrt U-Boot 2022-12-29 03:00:31 +00:00
mt7986a-xiaomi-redmi-router-ax6000-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7986a-xiaomi-redmi-router-ax6000.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-zyxel-ex5601-t0-common.dtsi mediatek: dts: remove some useless spaces 2025-08-24 13:22:09 +02:00
mt7986a-zyxel-ex5601-t0-stock.dts mediatek: filogic: fix memory node invalid length dtc warnings 2025-05-19 20:01:00 +08:00
mt7986a-zyxel-ex5601-t0-ubootmod.dts treewide: strip trailing whitespace 2025-05-20 00:47:37 +02:00
mt7986a-zyxel-ex5700-telenor.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986b-mercusys-mr90x-v1-common.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986b-mercusys-mr90x-v1-ubi.dts mediatek: filogic: fix WiFi MAC address invalid length dtc warnings 2025-05-19 20:01:00 +08:00
mt7986b-mercusys-mr90x-v1.dts mediatek: MERCUSYS MR90X v1: add OpenWrt U-Boot (UBI) layout 2024-11-30 18:36:05 +01:00
mt7986b-netgear-wax220.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986b-tplink-re6000xd.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7988a-arcadyan-mozart.dts mediatek: cleanup device tree for mt7988 devices 2025-06-13 11:15:08 +02:00
mt7988a-smartrg-mt-stuart.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7988a-smartrg-SDG-8733.dts mediatek: filogic: add Adtran SmartRG Mount Stuart series 2024-05-24 18:34:13 +01:00
mt7988a-smartrg-SDG-8734.dts mediatek: filogic: add Adtran SmartRG Mount Stuart series 2024-05-24 18:34:13 +01:00
mt7988d-asus-zenwifi-bt8-ubootmod.dts mediatek: cleanup device tree for mt7988 devices 2025-06-13 11:15:08 +02:00
mt7988d-asus-zenwifi-bt8.dts mediatek: dts: bring mt7988a.dtsi closer to upstream 2025-05-26 16:58:03 +01:00
mt7988d-asus-zenwifi-bt8.dtsi mediatek: dts: convert pinctrl bias to the Linux generic style 2025-08-24 13:22:08 +02:00
mt7988d-smartrg-SDG-8733A.dts mediatek: dts: bring mt7988a.dtsi closer to upstream 2025-05-26 16:58:03 +01:00