forked from mirror/openwrt
13dc286814
Both devices seem to be completely identical and D-Link doesnt even mention the DIR-X1550 A1 in the GPL source. Furthermore the supported devices header also just contains DIR-X1860 B1. The cherry on top is the FCC filing, which features the manual for DIR-X1550 A1 but the label info for DIR-X1860 B1. I guess someone at D-Link was just as confused as me. Hardware -------- SOC: MediaTek MT7621AT FLASH: 128MB (Spansion S34ML01G200TF100) RAM: 256MB (Winbond W632GU6NB-12) WIFI: MediaTek MT7915DAN + MT7975DN DBDC 2x2 802.11ax ETH: 1x WAN, 3x LAN LED: 6 (4 GPIO controllable, 2 WIFI hardwired) BTN: WPS, Reset UART: 115200 8N1 (Pinout silkscreened) - ignore VCC MAC addresses ------------- LAN Label MAC (stored in config2 partition as ASCII (entry factory_mac=xx:xx:xx:xx:xx:xx)) WAN LAN + 3 2.4G LAN + 1 5G LAN + 2 Installation ------------ Vendor UI --------- 1. Browse to http://192.168.0.1 and login. 2. Navigate to "Management" -> "Upgrade". 3. Press the "Select File" button and upload openwrt-ramips-mt7621-dlink_dir-x1860-b1-squashfs-factory.bin 4. Confirm the security questions, wait for a reboot and enjoy OpenWrt. Recovery UI ----------- 1. Set your IP address to 192.168.0.101, subnet 255.255.255.0. 2. Power on the device while holding reset. 3. Release reset once the status led starts to blink orange. 4. Open a chrome- or firefox based browser and browse to https://192.168.0.1 5. Upload openwrt-ramips-mt7621-dlink_dir-x1860-b1-squashfs-recovery.bin wait for a reboot and enjoy OpenWrt. Back to stock ------------- 1. Set your IP address to 192.168.0.101, subnet 255.255.255.0. 2. Power on the device while holding reset. 3. Release reset once the status led starts to blink orange. 4. Open a chrome- or firefox based browser and browse to https://192.168.0.1 5. Upload a decrypted vendor image, wait for a reboot and regret your decision. Decrypt vendor image -------------------- 1. Download dlink-sge-image.c and dlink-sge-image.h from the firmware-utils openwrt repository. 2. Compile a binary from the downloaded file e.g. gcc dlink-sge-image.c -lcrypto -o dlink-sge-image 3. Run ./dlink-sge-image DIR-X1860-B1 <vendor_image> <decrypted_image> -d Signed-off-by: Christoph Krapp <achterin@gmail.com> Link: https://github.com/openwrt/openwrt/pull/20410 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
229 lines
5.2 KiB
Bash
Executable file
229 lines
5.2 KiB
Bash
Executable file
#
|
|
# Copyright (C) 2010 OpenWrt.org
|
|
#
|
|
|
|
PART_NAME=firmware
|
|
REQUIRE_IMAGE_METADATA=1
|
|
|
|
RAMFS_COPY_BIN='fw_printenv fw_setenv'
|
|
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
|
|
|
platform_check_image() {
|
|
local board=$(board_name)
|
|
local magic="$(get_magic_long "$1")"
|
|
|
|
[ "$#" -gt 1 ] && return 1
|
|
|
|
case "$board" in
|
|
buffalo,wsr-2533dhpl2|\
|
|
buffalo,wsr-2533dhpls)
|
|
buffalo_check_image "$board" "$magic" "$1" || return 1
|
|
;;
|
|
esac
|
|
|
|
return 0
|
|
}
|
|
|
|
platform_do_upgrade() {
|
|
local board=$(board_name)
|
|
|
|
case "$board" in
|
|
alfa-network,quad-e4g)
|
|
[ "$(fw_printenv -n dual_image 2>/dev/null)" = "1" ] &&\
|
|
[ -n "$(find_mtd_part backup)" ] && {
|
|
PART_NAME=backup
|
|
if [ "$(fw_printenv -n bootactive 2>/dev/null)" = "1" ]; then
|
|
fw_setenv bootactive 2 || exit 1
|
|
else
|
|
fw_setenv bootactive 1 || exit 1
|
|
fi
|
|
}
|
|
;;
|
|
ampedwireless,ally-00x19k|\
|
|
ampedwireless,ally-r1900k)
|
|
if [ "$(fw_printenv --lock / -n bootImage 2>/dev/null)" != "0" ]; then
|
|
fw_setenv --lock / bootImage 0 || exit 1
|
|
fi
|
|
;;
|
|
iptime,ax2004m)
|
|
if [ "$(fw_printenv -n boot_from 2>/dev/null)" != "firmware1" ]; then
|
|
fw_setenv boot_from firmware1 || exit 1
|
|
fi
|
|
;;
|
|
mikrotik,ltap-2hnd|\
|
|
mikrotik,routerboard-750gr3|\
|
|
mikrotik,routerboard-760igs|\
|
|
mikrotik,routerboard-m11g|\
|
|
mikrotik,routerboard-m33g)
|
|
[ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
|
|
;;
|
|
asus,rt-ac65p|\
|
|
asus,rt-ac85p)
|
|
echo "Backing up firmware"
|
|
dd if=/dev/mtd4 bs=1024 count=4096 > /tmp/backup_firmware.bin
|
|
dd if=/dev/mtd5 bs=1024 count=52224 >> /tmp/backup_firmware.bin
|
|
mtd -e firmware2 write /tmp/backup_firmware.bin firmware2
|
|
;;
|
|
esac
|
|
|
|
case "$board" in
|
|
ampedwireless,ally-00x19k|\
|
|
ampedwireless,ally-r1900k|\
|
|
arcadyan,we420223-99|\
|
|
asus,rt-ac65p|\
|
|
asus,rt-ac85p|\
|
|
asus,rt-ax53u|\
|
|
asus,rt-ax54|\
|
|
asus,4g-ax56|\
|
|
beeline,smartbox-flash|\
|
|
beeline,smartbox-giga|\
|
|
beeline,smartbox-pro|\
|
|
beeline,smartbox-turbo|\
|
|
beeline,smartbox-turbo-plus|\
|
|
belkin,rt1800|\
|
|
dlink,covr-x1860-a1|\
|
|
dlink,dap-x1860-a1|\
|
|
dlink,dir-1960-a1|\
|
|
dlink,dir-2055-a1|\
|
|
dlink,dir-2150-a1|\
|
|
dlink,dir-2150-r1|\
|
|
dlink,dir-2640-a1|\
|
|
dlink,dir-2660-a1|\
|
|
dlink,dir-3040-a1|\
|
|
dlink,dir-3060-a1|\
|
|
dlink,dir-853-a3|\
|
|
dlink,dir-x1860-b1|\
|
|
elecom,wmc-x1800gst|\
|
|
elecom,wsc-x1800gs|\
|
|
etisalat,s3|\
|
|
h3c,tx1800-plus|\
|
|
h3c,tx1801-plus|\
|
|
h3c,tx1806|\
|
|
haier,har-20s2u1|\
|
|
hiwifi,hc5962|\
|
|
gemtek,wvrtm-127acn|\
|
|
gemtek,wvrtm-130acn|\
|
|
iptime,a3004t|\
|
|
iptime,ax2004m|\
|
|
iptime,t5004|\
|
|
jcg,q20|\
|
|
keenetic,kn-3510|\
|
|
linksys,e5600|\
|
|
linksys,e7350|\
|
|
linksys,ea6350-v4|\
|
|
linksys,ea7300-v1|\
|
|
linksys,ea7300-v2|\
|
|
linksys,ea7500-v2|\
|
|
linksys,ea8100-v1|\
|
|
linksys,ea8100-v2|\
|
|
mts,wg430223|\
|
|
netgear,eax12|\
|
|
netgear,r6220|\
|
|
netgear,r6260|\
|
|
netgear,r6350|\
|
|
netgear,r6700-v2|\
|
|
netgear,r6800|\
|
|
netgear,r6850|\
|
|
netgear,r6900-v2|\
|
|
netgear,r7200|\
|
|
netgear,r7450|\
|
|
netgear,wac104|\
|
|
netgear,wac124|\
|
|
netgear,wax202|\
|
|
netgear,wax214v2|\
|
|
netis,n6|\
|
|
netis,wf2881|\
|
|
raisecom,msg1500-x-00|\
|
|
rostelecom,rt-fe-1a|\
|
|
rostelecom,rt-sf-1|\
|
|
sercomm,na502|\
|
|
sercomm,na502s|\
|
|
sim,simax1800t|\
|
|
sim,simax1800u|\
|
|
tplink,ec330-g5u-v1|\
|
|
wifire,s1500-nbn|\
|
|
xiaomi,mi-router-3g|\
|
|
xiaomi,mi-router-3-pro|\
|
|
xiaomi,mi-router-4|\
|
|
xiaomi,mi-router-ac2100|\
|
|
xiaomi,mi-router-cr6606|\
|
|
xiaomi,mi-router-cr6608|\
|
|
xiaomi,mi-router-cr6609|\
|
|
xiaomi,redmi-router-ac2100|\
|
|
z-router,zr-2660|\
|
|
zyxel,nwa50ax|\
|
|
zyxel,nwa55axe)
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
buffalo,wsr-2533dhpl2|\
|
|
buffalo,wsr-2533dhpls)
|
|
buffalo_do_upgrade "$1"
|
|
;;
|
|
dna,valokuitu-plus-ex400|\
|
|
genexis,pulse-ex400)
|
|
inteno_do_upgrade "$1"
|
|
;;
|
|
elecom,wrc-x1800gs)
|
|
[ "$(fw_printenv -n bootmenu_delay)" != "0" ] || \
|
|
fw_setenv bootmenu_delay 3
|
|
iodata_mstc_set_flag "bootnum" "persist" "0x4" "1,2" "1"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
iodata,wn-ax1167gr2|\
|
|
iodata,wn-ax2033gr|\
|
|
iodata,wn-dx1167r|\
|
|
iodata,wn-dx2033gr)
|
|
iodata_mstc_set_flag "debugflag" "factory" "0xfe75" "0,1" "1"
|
|
iodata_mstc_set_flag "bootnum" "persist" "0x4" "1,2" "1"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
iodata,wn-deax1800gr)
|
|
iodata_mstc_set_flag "bootnum" "working" "0x4" "0,1" "0"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
iodata,wn-dx1200gr)
|
|
iodata_mstc_set_flag "debugflag" "factory" "0x1fe75" "0,1" "1"
|
|
iodata_mstc_set_flag "bootnum" "persist" "0x4" "1,2" "1"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
plasmacloud,pax1800-lite)
|
|
platform_do_upgrade_dualboot_datachk "$1"
|
|
;;
|
|
tplink,er605-v2)
|
|
echo "Upgrading tplink,er605-v2"
|
|
CI_UBIPART="firmware"
|
|
CI_KERNPART="kernel"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
ubnt,edgerouter-x|\
|
|
ubnt,edgerouter-x-sfp)
|
|
platform_upgrade_ubnt_erx "$1"
|
|
;;
|
|
zyxel,lte3301-plus|\
|
|
zyxel,lte5398-m904|\
|
|
zyxel,lte7490-m904|\
|
|
zyxel,nr7101)
|
|
fw_setenv CheckBypass 0
|
|
fw_setenv Image1Stable 0
|
|
[ "$(fw_printenv -n BootingFlag)" = "0" ] || fw_setenv BootingFlag 0
|
|
CI_KERNPART="Kernel"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
zyxel,wap6805)
|
|
local kernel2_mtd="$(find_mtd_part Kernel2)"
|
|
[ "$(hexdump -n 4 -e '"%x"' $kernel2_mtd)" = "56190527" ] &&\
|
|
[ "$(hexdump -n 4 -s 104 -e '"%x"' $kernel2_mtd)" != "0" ] &&\
|
|
dd bs=4 count=1 seek=26 conv=notrunc if=/dev/zero of=$kernel2_mtd 2>/dev/null &&\
|
|
echo "Kernel2 sequence number was reset to 0"
|
|
CI_KERNPART="Kernel"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
zyxel,wsm20)
|
|
zyxel_mstc_upgrade_prepare
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
*)
|
|
default_do_upgrade "$1"
|
|
;;
|
|
esac
|
|
}
|