forked from mirror/openwrt
726bb8e0e2
SOC: MediaTek MT7981b RAM: 256MB DDR3 FLASH: 128MB SPI-NAND (Winbond W25N01GV) WIFI: Mediatek MT7981b DBDC 802.11ax 2.4/5 GHz ETH: MediaTek MT7531 Switch UART: 3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC) Interface MAC Algorithm LAN 8C:AE:DB:2C:xx:xx label WAN 8C:AE:DB:2C:xx:xx label +1 WLAN 2.4G 8C:AE:DB:2C:xx:xx label +2 WLAN 5G 8C:AE:DB:2C:xx:xx label +3 Installation -------------------Install openwrt image-------------------------------: Set a static ip on the ethernet interface of your PC. (ip address: 192.168.1.254, subnet mask:255.255.255.0) . Download the OpenWrt uboot image (openwrt-mediatek-filogic-snr_cpe-ax2-bl31-uboot.fip). SSH/SCP opened by default on the stock firmware (3.0.1). Username: Admin, default password: Admin. Check it on the bottom of the router. Copy uboot image using SCP (WinSCP) to /tmp dir on SNR-CPE-AX2. Download recovery file. openwrt-mediatek-filogic-snr_snr-cpe-ax2-initramfs-recovery.itb. Copy the recovery image to a TFTP server reachable at 192.168.1.254/24. Open ssh shell to the SNR-CPE-AX2. Run commands: mtd write \ /tmp/openwrt-mediatek-filogic-snr_snr-cpe-ax2-bl31-uboot.fip FIP reboot Wait until recovery boot. Open web 192.168.1.1 and do sysupgrade by openwrt-mediatek-filogic-snr_cpe-ax2-squashfs-sysupgrade.itb Signed-off-by: Nikolay March <palladin82@yandex.ru> Link: https://github.com/openwrt/openwrt/pull/18700 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> |
||
|---|---|---|
| .. | ||
| imagebuilder | ||
| linux | ||
| llvm-bpf | ||
| sdk | ||
| toolchain | ||
| Config.in | ||
| Makefile | ||