Tianling Shen 6f8c58bfd8 mediatek: add ubootmod layout for cudy tr3000 v1 ... This allows us to use the full size of nand, which increases ubi size from 64M to 122.25M. If you are at factory firmware, please refer commit 63b8d98dd0 ("mediatek: add support for Cudy TR3000 v1") to boot into OpenWrt initramfs (stock layout). Flash instructions: 1. Login into the device and backup everything, especially 'Factory' part. 1. Unlock mtd partitions: apk update && apk add kmod-mtd-rw insmod mtd-rw i_want_a_brick=1 3. Write new BL2 and FIP mtd write openwrt-mediatek-filogic-cudy_tr3000-v1-ubootmod-preloader.bin BL2 mtd write openwrt-mediatek-filogic-cudy_tr3000-v1-ubootmod-bl31-uboot.fip FIP 4. Set static IP on your PC: IP 192.168.1.254/24, GW 192.168.1.1 5. Serve OpenWrt initramfs image using TFTP server. 6. Cut off the power and re-engage, wait for TFTP recovery to complete. 7. After OpenWrt has booted, perform sysupgrade. Tested-by: Yangyu Chen <cyy@cyyself.name> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>		2025-05-27 19:56:55 +08:00
..
imagebuilder	imagebuilder: fix addition of local packages	2025-02-21 10:44:42 +01:00
linux	mediatek: add ubootmod layout for cudy tr3000 v1	2025-05-27 19:56:55 +08:00
llvm-bpf	build: use zstd for IB, toolchain, SDK and LLVM compression	2024-04-13 08:05:04 +02:00
sdk	build: fix building llvm tarball	2025-02-10 22:10:50 +01:00
toolchain	build: use zstd for IB, toolchain, SDK and LLVM compression	2024-04-13 08:05:04 +02:00
Config.in	loongarch64: new target	2024-05-04 14:14:16 +08:00
Makefile	build: add $(STAGING_DIR) and $(BIN_DIR) preparation to target and package subdir compile dependencies	2024-03-03 23:13:59 +01:00