arne/openwrt
1
0
Fork 0
forked from mirror/openwrt
Code Pull requests Activity
No description
48082 commits 2 branches 82 tags 253 MiB
Find a file
Edward Matijevic 6da3194127 bcm47xx: add support for NETGEAR R6200 V1 
This patch adds supports for the NETGEAR R6200 V1
This device is mainlined in Linux as of 5.4

Specification:
   - SOC: Broadcom BCM4718A1 (480 MHz)
   - Flash: 16MB (Macronix MX25L128)
   - RAM: 128MB DDR2
   - SWITCH: BCM53125
   - Ethernet: 5x GE (1 WAN + 4 LAN, Inverted order)
   - WLAN 2.4G: In SOC
   - WLAN 5GHz: miniPCIe card, BCM4352 (ID: 4360)
   - USB: 1x USB 2.0 port (Type A)
   - Buttons: Reset, WLAN, WPS
   - LED: Amber for Power, others need a workaround
   - UART: 1x UART on PCB

LED Issues: They are controlled by a 74HC164 via bit banging(GPIO 6/7)

Firmware Install Instructions
=============================
Using the device specific .chk, use that file to perform
a normal device upgrade in the OEM admin page.

Signed-off-by: Edward Matijevic <motolav@gmail.com>
2020-06-24 00:17:49 +02:00
.github build: Update README & github help 2018-07-08 09:41:53 +01:00
config toolchain: remove gcc libssp and use libc variant 2020-06-17 23:57:07 +02:00
include kernel: bump 5.4 to 5.4.48 2020-06-22 12:51:22 +02:00
package base-files: remove urandom-seed definition 2020-06-23 22:23:21 +02:00
scripts scripts: config: remove accidentally added file 2020-06-02 18:17:31 +02:00
target bcm47xx: add support for NETGEAR R6200 V1 2020-06-24 00:17:49 +02:00
toolchain toolchain: remove gcc libssp and use libc variant 2020-06-17 23:57:07 +02:00
tools ath79: add support for TP-Link CPE610 v2 2020-06-20 13:03:39 +02:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore Revert ".gitignore: ignore more scripts/config output" 2020-04-11 19:53:28 +01:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in merge: base: update base-files and basic config 2017-12-08 19:41:18 +01:00
feeds.conf.default feeds: switch git.lede-project.org URLs to git.openwrt.org 2018-01-16 16:59:22 +01:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile build: refactor JSON info files to profiles.json 2020-04-03 12:17:45 +02:00
README build: switch to Python 3 2019-07-26 08:09:16 +02:00
rules.mk rules.mk: remove "$(STAGING_DIR)/include" 2019-11-02 20:51:56 +01:00

README 

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org