Lech Perczak 9ef931f96b ath79: ZTE MF286[A,R]: add "Power button blocker" GPIO switch ... ZTE MF286A and MF286R feature a "power switch override" GPIO in stock firmware as means to prevent power interruption during firmware update, especially when used with internal battery. To ensure that this GPIO is properly driven as in stock firmware, configure it with userspace GPIO switch. It was observed that on some units, the modem would not be restarted together with the board itself on reboot, this should help with that as well. Signed-off-by: Lech Perczak <lech.perczak@gmail.com> (cherry picked from commit 1fabeeb799)		2022-05-15 16:39:45 +02:00
..
base-files/etc/hotplug.d/ieee80211	ath79: migrate Archer C5 5GHz radio device paths	2022-03-31 18:07:53 +02:00
dts	ath79: fix I2C on GL-AR300M devices	2022-05-15 16:39:45 +02:00
files	ath79: add support for reset key on MikroTik RB912UAG-2HPnD	2022-01-19 16:40:12 +01:00
generic	ath79: add support for Sophos AP100/AP55 family	2022-04-19 21:45:46 +02:00
image	ath79: ubnt: drop swconfig on ac-{lite,lr,mesh}	2022-05-01 13:23:12 +02:00
mikrotik	ath79: add support for MikroTik RouterBOARD 962UiGS-5HacT2HnT (hAP ac)	2022-04-19 21:45:46 +02:00
nand	ath79: ZTE MF286[A,R]: add "Power button blocker" GPIO switch	2022-05-15 16:39:45 +02:00
patches-5.10	kernel: bump 5.10 to 5.10.113	2022-05-01 14:13:15 +02:00
tiny	ath79: Move TPLink WPA8630Pv2 to ath79-tiny target	2022-04-10 16:26:01 +01:00
config-5.10	ath79: add support for reset key on MikroTik RB912UAG-2HPnD	2022-01-19 16:40:12 +01:00
Makefile	ath79: switch to Kernel 5.10	2021-12-21 21:38:52 +01:00
modules.mk