forked from mirror/openwrt
9c8ac97e70
This adds a new port for the above device. Currently, there is no easy installation method except opening the device up and soldering a UART header on and getting u-boot shell access. You boot the initramfs version first using tftpboot, then once booted, you sysupgrade. Shell access to root on vendor firmware: admin:1234 To get U-Boot console, spam '4' into the serial console at boot. with LEDs on the left, serial pinout is: o - tx o - rx o - gnd x - 3v3 server ip for tftpboot 192.168.0.225 The initramfs-kernel version boots without touching onboard flash with: MT7628# tftpboot 0x80000000 openwrt-ramips-mt76x8-tplink_archer-mr200-v6-initramfs-kernel.bin MT7628# bootm 0x80000000 Then when it boots off RAM, you copy openwrt-ramips-mt76x8-tplink_archer-mr200-v6-squashfs-sysupgrade.bin to /tmp/sysupgrade.bin of the device and run: root@OpenWrt:/tmp# sysupgrade -n sysupgrade.bin - [x] LEDs working - [x] Buttons working - [x] wlan detected - [x] wwan detected - [x] initramfs image working - [x] sysupgrade working Signed-off-by: Damien Zammit <damien@zamaudio.com> Link: https://github.com/openwrt/openwrt/pull/15610 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> |
||
|---|---|---|
| .. | ||
| imagebuilder | ||
| linux | ||
| llvm-bpf | ||
| sdk | ||
| toolchain | ||
| Config.in | ||
| Makefile | ||