openwrt

No description

Find a file

Travis Kemen 3f8eaeb2c3 This patch adds a number of configuration options to the MadWifi package. You can now configure the HAL, bus, default rate control algorithm as well as the debug mode from within make menuconfig. The goal is to be able to support hardware profiles with different HALs without messing around with the Makefile directly. Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11140		2008-05-15 00:59:34 +00:00
docs
include	This patch makes kernel modules check if config is defined and creates a config passthrough target which will evaluate the original config in the generated package. This is done so kernel modules can have configuration menus like busybox, etc... Signed-off-by: Axel Gembe <ago@bastart.eu.org>	2008-05-15 00:57:50 +00:00
package	This patch adds a number of configuration options to the MadWifi package. You can now configure the HAL, bus, default rate control algorithm as well as the debug mode from within make menuconfig. The goal is to be able to support hardware profiles with different HALs without messing around with the Makefile directly. Signed-off-by: Axel Gembe <ago@bastart.eu.org>	2008-05-15 00:59:34 +00:00
scripts
target	add proper led support to ifxmips	2008-05-14 13:43:18 +00:00
toolchain	Fix a bug causing an infinite loop in getaddrinfo (closes: #3344 )	2008-05-11 10:19:12 +00:00
tools
.gitignore
BSDmakefile
Config.in	Update size and inodes of grup image	2008-05-12 19:00:46 +00:00
feeds.conf
LICENSE
Makefile
README
rules.mk

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org