Shiji Yang 3c7ce20d5c ath79: add back board-2.bin to COMFAST devices ... The ath10k driver will load both pre-calibration data and board-2.bin if board-2.bin exists. So it's not necessary to remove it. And this change won't increase jffs2 image size. Signed-off-by: Shiji Yang <yangshiji66@qq.com>		2024-02-01 17:09:01 +01:00
..
base-files/etc/hotplug.d/ieee80211	ath79: migrate Archer C5 5GHz radio device paths	2022-03-31 18:07:29 +02:00
dts	ath79: ubnt-bullet-m-xw: fix Ethernet PHY traffic	2024-01-25 23:45:41 +01:00
files	ag71xx: fix wrong register definition issue	2024-01-05 16:44:29 +01:00
generic	ath79: add back board-2.bin to COMFAST devices	2024-02-01 17:09:01 +01:00
image	ath79: add Ubiquiti Rocket M XW as alternate name to Bullet M XW	2024-01-25 23:45:41 +01:00
mikrotik	ath79: support MikroTik RouterBOARD 911G-5HPacD	2024-01-07 01:19:56 +01:00
nand	ath79: make boot-leds service executable	2023-12-12 19:35:03 +01:00
patches-5.15	ath79: read back reset register	2024-01-11 01:40:50 +01:00
patches-6.1	kernel: bump 6.1 to 6.1.72	2024-01-19 21:24:44 +01:00
tiny	ath79: add missing symbols by refreshing kernel configs	2023-09-08 18:06:30 +02:00
config-5.15	ath79: add missing symbols by refreshing kernel configs	2023-09-08 18:06:30 +02:00
config-6.1	ath79: refresh patches and configs to introduce kernel 6.1 support	2023-09-08 18:06:30 +02:00
Makefile	Revert "ath79: use kernel 6.1 as default"	2023-09-09 08:42:50 +02:00
modules.mk