forked from mirror/openwrt
dc7efaefb5
Hardware Highlights:
This patch adds support for Western Digital MyBook Live Series:
CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz)
32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory
Board: Apollo-3G - APM82181 Board, 1*SATA
DRAM: 256 MB (2x NT5TU64M16GG-AC)
FLASH: 512 kB (SST 39VF040)
Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610
WARNING: The serial port needs a TTL/RS-232 v3.3 level converter!
The MyBook Live Duo additionally features a 1x USB 2.0 host port
and can support a second hard-drive.
This target produces two images for a target.
1. ext4 image
The extracted/raw image can be directly installed on
the internal HDD via "dd if=img.ext4 of=/dev/sdX".
This can either be done in place with the stock MyBook Live
firmware via ssh. Or by removing the HDD and writing the image
with a different PC.
The the compressed images are useful for sysupgrade.
2. recovery.tar image for TFTP and Serial.
extract the recovery.tar to a TFTP server directory.
On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert:
# setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self
Where 192.168.1.254 is your TFTP server.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
29 lines
636 B
Makefile
29 lines
636 B
Makefile
#
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
# See /LICENSE for more information.
|
|
#
|
|
include $(TOPDIR)/rules.mk
|
|
|
|
ARCH:=powerpc
|
|
BOARD:=apm821xx
|
|
BOARDNAME:=AppliedMicro APM821xx
|
|
CPU_TYPE:=464fp
|
|
FEATURES:=fpu dt gpio
|
|
MAINTAINER:=Chris Blake <chrisrblake93@gmail.com>, \
|
|
Christian Lamparter <chunkeey@gmail.com>
|
|
SUBTARGETS:=nand sata
|
|
|
|
KERNEL_PATCHVER:=4.4
|
|
|
|
include $(INCLUDE_DIR)/target.mk
|
|
|
|
KERNELNAME:=uImage
|
|
|
|
DEFAULT_PACKAGES += \
|
|
kmod-leds-gpio kmod-i2c-core kmod-gpio-button-hotplug
|
|
|
|
define Target/Description
|
|
Build images for AppliedMicro APM821xx based boards.
|
|
endef
|
|
|
|
$(eval $(call BuildTarget))
|