1
0
Fork 0
forked from mirror/openwrt
openwrt/target/linux/ramips/image
Abdul Aziz Amar 3b3dccae0e ramips: add support for BOLT! Arion
This device is from now-defunct BOLT! ISP in Indonesia.
The original firmware is based on mediatek SDK running linux 2.6 or 3.x in later revision.

Specifications:

- SoC:      MediaTek MT7621
- Flash:    32 MiB NOR SPI
- RAM:      128 MiB DDR3
- Ethernet: 2x 10/100/1000 Mbps (switched, LAN + WAN)
- WIFI0:    MT7603E 2.4GHz 802.11b/g/n
- WIFI1:    MT7612E 5GHz 802.11ac
- Antennas: 2x internal, non-detachable
- LEDs:     Programmable LEDs: 5 blue LEDs (wlan, tel, sig1-3) and 2 red LEDs (wlan and sig1)
            Non-programmable "Power"  LED
- Buttons:  Reset and WPS

Instalation:
Install from TFTP

Set your PC IP to 10.10.10.3 and gateway to 10.10.10.123
Press "1" when turning on the router, and type the initramfs file name

You also need to solder pin header or cable to J4 or neighboring test points (T19-T21)
Pinouts from top to bottom: GND, TX, RX, VCC (3.3v)
Baudrate: 57600n8

There's also an additional gigabit transformer and RTL8211FD managed by the LTE module on the backside of the PCB.

Signed-off-by: Abdul Aziz Amar <abdulaziz.amar@gmail.com>
(cherry picked from commit 78c3534645)
2022-04-19 21:45:46 +02:00
..
lzma-loader ramips: lzma-loader: make FLASH_START configurable 2020-09-03 14:15:30 +02:00
common-tp-link.mk treewide: call check-size before append-metadata 2021-07-10 19:40:10 +02:00
Makefile ramips: move KERNEL_LOADADDR into Device/Default 2022-02-08 23:23:53 +09:00
mt76x8.mk ramips: add support for Wavlink WL-WN531A3 2022-04-19 21:45:46 +02:00
mt7620.mk ramips: add support for Netgear WN3100RPv2 2022-03-16 23:14:25 +09:00
mt7621.mk ramips: add support for BOLT! Arion 2022-04-19 21:45:46 +02:00
rt288x.mk ramips: tidy up image subtarget Makefiles 2020-05-08 18:58:39 +02:00
rt305x.mk ramips: fix DEVICE_VENDOR for unbranded devices 2022-03-09 15:38:36 +09:00
rt3883.mk ramips: provide default BLOCKSIZE for Device/seama 2021-08-30 00:37:47 +02:00