forked from mirror/openwrt
853d73f9d1
Hardware specification ---------------------- * RTL9301 SoC, 1 MIPS 34KEc core @ 800MHz * 512MB DRAM * 2MB NOR Flash * 128MB NAND Flash * 24 x 10/100/1000BASE-T ports * 4 x 10G SFP+ ports * Power LED, Fault LED * Reset button on front panel * UART (115200 8N1) via RJ45 Installation using serial interface ----------------------------------- 1. Press "a" "c" "p" during message "Enter correct key to stop autoboot" 2. Start network "rtk network on" 3. Load image "tftpboot <TFTP IP>:openwrt-realtek-rtl930x_nand-linksys_lgs328c-initramfs-kernel.bin" 4. Boot image "bootm" 5. Switch to first bootpartition "fw_setsys bootpartition 0" 5. Download sysupgrade "scp <IP>:openwrt-realtek-rtl930x_nand-linksys_lgs328c-squashfs-sysupgrade.bin /tmp/." 6. Install sysupgrade "sysupgrade /tmp/openwrt-realtek-rtl930x_nand-linksys_lgs328c-squashfs-sysupgrade.bin" Installation using OEM webinterface ----------------------------------- This is not possible because the OpenWrt NAND Flash layout is different from the vendor layout. To be precise. Vendor uses: - 64 MB vendor UBI root_data - 32 MB vendor kernel+root 1 (~19 MB used) - 32 MB vendor kernel+root 2 (~19 MB used) OpenWrt uses: - 64 MB vendor UBI (not touched) - 10 MB OpenWrt kernel - 22 MB Openwrt mtd-concat UBI - 23 MB vendor kernel 2 (space reduced, vendor data unchanged) - 09 MB OpenWrt mtd-concat UBI Dual-boot with stock firmware using writable u-boot-env ------------------------------------------------------- From stock to OpenWrt / primary image 1 (CLI as admin): - > boot system image1 - > reboot From OpenWrt to stock / boot image 2: (shell as root) - # fw_setsys bootpartition 1 - # reboot Debrick using serial interface ------------------------------ 1. Press "a" "c" "p" during message "Enter correct key to stop autoboot" 2. Load vendor image with "upgrade runtime <TFTP IP>:LGS328xxxxx.imag" 3. switch to primary partition "setsys bootpartition 0" 4. safe config "savesys" Further documentation --------------------- See https://openwrt.org/toh/linksys/lgs352c Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> Link: https://github.com/openwrt/openwrt/pull/20255 Signed-off-by: Robert Marko <robimarko@gmail.com>
27 lines
593 B
Makefile
27 lines
593 B
Makefile
# SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
include ./common.mk
|
|
|
|
define Device/linksys_lgs328c
|
|
$(Device/uimage-rt-loader)
|
|
SOC := rtl9301
|
|
IMAGE_SIZE := 29696k
|
|
KERNEL_SIZE := 10240k
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := LGS328C
|
|
BELKIN_MODEL := BKS-RTL93xx
|
|
BELKIN_HEADER := 0x07600001
|
|
LINKSYS_MODEL := 60412040
|
|
PAGESIZE := 2048
|
|
BLOCKSIZE := 128k
|
|
UBINIZE_OPTS := -E 5
|
|
KERNEL := \
|
|
$$(KERNEL) | \
|
|
pad-to $$(BLOCKSIZE)
|
|
IMAGE/sysupgrade.bin := \
|
|
append-rootfs | \
|
|
pad-rootfs | \
|
|
sysupgrade-tar rootfs=$$$$@ | \
|
|
append-metadata
|
|
endef
|
|
TARGET_DEVICES += linksys_lgs328c
|