arne/openwrt
1
0
Fork 0
forked from mirror/openwrt
Code Pull requests Activity
openwrt/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
Myoung Ha, Ji de0b9b6252 ramips: add support for ipTIME AX2002MESH 
ipTIME AX2002MESH is an 802.11ax (Wi-Fi 6) router based on
MediaTek MT7621 SoC.

Specifications:
- SoC: MediaTek MT7621, MIPS 1004Kc, 880 MHz
- RAM: 128 MiB
- Flash: NAND 128 MiB (ESMT PSU1GA30DT)
- WLAN: MediaTek MT7915E
  - 2.4 GHz: ax/b/g/n
  - 5 GHz: ac/ax/n
- Ethernet:
  - LAN: MediaTek MT7530, 2x 1GbE
  - WAN: MediaTek SoC built-in, 1x 1GbE
- UART: J4 header, 115200 8N1
  - Pinout: [3V3] [TX] [RX] [GND]
- Button: Reset
- LEDs: 6 LEDs
  - 1x CPU (Amber)
  - 1x WLAN 5GHz (Amber)
  - 1x WLAN 2.4GHz (Amber)
  - 2x LAN (Amber)
  - 1x WAN (Amber)
- Power: DC 12V/1A

MAC addresses:
| Interface | MAC               | Algorithm                 |
|:----------|:-----------------:|:--------------------------|
| WLAN 2.4G | 58:86:94:XX:XX:34 | label                     |
| WAN       | 58:86:94:XX:XX:35 | label + 1                 |
| LAN       | 58:86:94:XX:XX:37 | label + 3                 |
| WLAN 5G   | 5A:86:94:XX:XX:37 | label + 3 with LA bit set |
- The WLAN 2.4G MAC address (label) is stored in factory partition, 0x4

Installation:
- Stock web interface:
  1. Flash the **initramfs-factory** image through the web page.
  2. Boot into OpenWrt and perform sysupgrade with **sysupgrade** image.
- Recovery mode:
  1. Turn on the device and press the Reset button more than 10 seconds
     to enter recovery mode.
  2. Access the recovery web interface at 192.168.0.1/24 and flash the
     **initramfs-factory** image.
  3. Boot into OpenWrt and perform sysupgrade with **sysupgrade** image.

Signed-off-by: Myoung Ha, Ji <webmaster@null0xff.com>
Link: https://github.com/openwrt/openwrt/pull/20584
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-11-21 01:49:58 +01:00

232 lines
5.2 KiB
Bash
Raw Blame History

#
# Copyright (C) 2010 OpenWrt.org
#
PART_NAME=firmware
REQUIRE_IMAGE_METADATA=1
RAMFS_COPY_BIN='fw_printenv fw_setenv'
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
platform_check_image() {
local board=$(board_name)
local magic="$(get_magic_long "$1")"
[ "$#" -gt 1 ] && return 1
case "$board" in
buffalo,wsr-2533dhpl2|\
buffalo,wsr-2533dhpls)
buffalo_check_image "$board" "$magic" "$1" || return 1
;;
esac
return 0
}
platform_do_upgrade() {
local board=$(board_name)
case "$board" in
alfa-network,quad-e4g)
[ "$(fw_printenv -n dual_image 2>/dev/null)" = "1" ] &&\
[ -n "$(find_mtd_part backup)" ] && {
PART_NAME=backup
if [ "$(fw_printenv -n bootactive 2>/dev/null)" = "1" ]; then
fw_setenv bootactive 2 || exit 1
else
fw_setenv bootactive 1 || exit 1
fi
}
;;
ampedwireless,ally-00x19k|\
ampedwireless,ally-r1900k)
if [ "$(fw_printenv --lock / -n bootImage 2>/dev/null)" != "0" ]; then
fw_setenv --lock / bootImage 0 || exit 1
fi
;;
iptime,ax2002m|\
iptime,ax2004m)
if [ "$(fw_printenv -n boot_from 2>/dev/null)" != "firmware1" ]; then
fw_setenv boot_from firmware1 || exit 1
fi
;;
mikrotik,ltap-2hnd|\
mikrotik,routerboard-750gr3|\
mikrotik,routerboard-760igs|\
mikrotik,routerboard-m11g|\
mikrotik,routerboard-m33g)
[ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
;;
asus,rt-ac65p|\
asus,rt-ac85p)
echo "Backing up firmware"
dd if=/dev/mtd4 bs=1024 count=4096 > /tmp/backup_firmware.bin
dd if=/dev/mtd5 bs=1024 count=52224 >> /tmp/backup_firmware.bin
mtd -e firmware2 write /tmp/backup_firmware.bin firmware2
;;
esac
case "$board" in
ampedwireless,ally-00x19k|\
ampedwireless,ally-r1900k|\
arcadyan,we420223-99|\
asus,rt-ac65p|\
asus,rt-ac85p|\
asus,rt-ax53u|\
asus,rt-ax54|\
asus,4g-ax56|\
beeline,smartbox-flash|\
beeline,smartbox-giga|\
beeline,smartbox-pro|\
beeline,smartbox-turbo|\
beeline,smartbox-turbo-plus|\
belkin,rt1800|\
dlink,covr-x1860-a1|\
dlink,dap-x1860-a1|\
dlink,dir-1960-a1|\
dlink,dir-2055-a1|\
dlink,dir-2150-a1|\
dlink,dir-2150-r1|\
dlink,dir-2640-a1|\
dlink,dir-2660-a1|\
dlink,dir-3040-a1|\
dlink,dir-3060-a1|\
dlink,dir-853-a3|\
dlink,dir-x1860-b1|\
edup,ep-rt2960s|\
elecom,wmc-x1800gst|\
elecom,wsc-x1800gs|\
etisalat,s3|\
h3c,tx1800-plus|\
h3c,tx1801-plus|\
h3c,tx1806|\
haier,har-20s2u1|\
hiwifi,hc5962|\
gemtek,wvrtm-127acn|\
gemtek,wvrtm-130acn|\
iptime,a3004t|\
iptime,ax2002m|\
iptime,ax2004m|\
iptime,t5004|\
jcg,q20|\
keenetic,kn-3510|\
linksys,e5600|\
linksys,e7350|\
linksys,ea6350-v4|\
linksys,ea7300-v1|\
linksys,ea7300-v2|\
linksys,ea7500-v2|\
linksys,ea8100-v1|\
linksys,ea8100-v2|\
mts,wg430223|\
netgear,eax12|\
netgear,r6220|\
netgear,r6260|\
netgear,r6350|\
netgear,r6700-v2|\
netgear,r6800|\
netgear,r6850|\
netgear,r6900-v2|\
netgear,r7200|\
netgear,r7450|\
netgear,wac104|\
netgear,wac124|\
netgear,wax202|\
netgear,wax214v2|\
netis,n6|\
netis,wf2881|\
raisecom,msg1500-x-00|\
rostelecom,rt-fe-1a|\
rostelecom,rt-sf-1|\
sercomm,na502|\
sercomm,na502s|\
sim,simax1800t|\
sim,simax1800u|\
tplink,ec330-g5u-v1|\
wifire,s1500-nbn|\
xiaomi,mi-router-3g|\
xiaomi,mi-router-3-pro|\
xiaomi,mi-router-4|\
xiaomi,mi-router-ac2100|\
xiaomi,mi-router-cr6606|\
xiaomi,mi-router-cr6608|\
xiaomi,mi-router-cr6609|\
xiaomi,redmi-router-ac2100|\
z-router,zr-2660|\
zyxel,nwa50ax|\
zyxel,nwa55axe)
nand_do_upgrade "$1"
;;
buffalo,wsr-2533dhpl2|\
buffalo,wsr-2533dhpls)
buffalo_do_upgrade "$1"
;;
dna,valokuitu-plus-ex400|\
genexis,pulse-ex400)
inteno_do_upgrade "$1"
;;
elecom,wrc-x1800gs)
[ "$(fw_printenv -n bootmenu_delay)" != "0" ] || \
fw_setenv bootmenu_delay 3
iodata_mstc_set_flag "bootnum" "persist" "0x4" "1,2" "1"
nand_do_upgrade "$1"
;;
iodata,wn-ax1167gr2|\
iodata,wn-ax2033gr|\
iodata,wn-dx1167r|\
iodata,wn-dx2033gr)
iodata_mstc_set_flag "debugflag" "factory" "0xfe75" "0,1" "1"
iodata_mstc_set_flag "bootnum" "persist" "0x4" "1,2" "1"
nand_do_upgrade "$1"
;;
iodata,wn-deax1800gr)
iodata_mstc_set_flag "bootnum" "working" "0x4" "0,1" "0"
nand_do_upgrade "$1"
;;
iodata,wn-dx1200gr)
iodata_mstc_set_flag "debugflag" "factory" "0x1fe75" "0,1" "1"
iodata_mstc_set_flag "bootnum" "persist" "0x4" "1,2" "1"
nand_do_upgrade "$1"
;;
plasmacloud,pax1800-lite)
platform_do_upgrade_dualboot_datachk "$1"
;;
tplink,er605-v2)
echo "Upgrading tplink,er605-v2"
CI_UBIPART="firmware"
CI_KERNPART="kernel"
nand_do_upgrade "$1"
;;
ubnt,edgerouter-x|\
ubnt,edgerouter-x-sfp)
platform_upgrade_ubnt_erx "$1"
;;
zyxel,lte3301-plus|\
zyxel,lte5398-m904|\
zyxel,lte7490-m904|\
zyxel,nr7101)
fw_setenv CheckBypass 0
fw_setenv Image1Stable 0
[ "$(fw_printenv -n BootingFlag)" = "0" ] || fw_setenv BootingFlag 0
CI_KERNPART="Kernel"
nand_do_upgrade "$1"
;;
zyxel,wap6805)
local kernel2_mtd="$(find_mtd_part Kernel2)"
[ "$(hexdump -n 4 -e '"%x"' $kernel2_mtd)" = "56190527" ] &&\
[ "$(hexdump -n 4 -s 104 -e '"%x"' $kernel2_mtd)" != "0" ] &&\
dd bs=4 count=1 seek=26 conv=notrunc if=/dev/zero of=$kernel2_mtd 2>/dev/null &&\
echo "Kernel2 sequence number was reset to 0"
CI_KERNPART="Kernel"
nand_do_upgrade "$1"
;;
zyxel,wsm20)
zyxel_mstc_upgrade_prepare
nand_do_upgrade "$1"
;;
*)
default_do_upgrade "$1"
;;
esac
}
View git blame Copy permalink