arne/openwrt
1
0
Fork 0
forked from mirror/openwrt
Code Pull requests Activity
No description
63116 commits 2 branches 82 tags 253 MiB
Find a file
INAGAKI Hiroshi 0dc0b98295 realtek: add support for XikeStor SKS8300-8X 
XikeStor (Seeker) SKS8300-8X is a 8 ports Multi-Gig switch, based on
RTL9303.

Specification:

- SoC             : Realtek RTL9303
- RAM             : DDR3 512 MiB
- Flash           : SPI-NOR 32 MiB (Winbond W25Q256JVFIQ)
- Ethernet        : 8x 1/2.5/10 Gbps (SFP+)
- LEDs/Keys (GPIO): 1x/1x
- UART            : "Console" port on the front panel
  - type          : RS-232C
  - connector     : RJ-45
  - settings      : 9600n8
- Watchdog        : Diodes PT7A7514WE
- Power           : 12 VDC, 2 A

Flash instruction using initramfs image:

 1. Prepare TFTP server with an IP address "192.168.2.36"
 2. Connect your PC to Port1 on SKS8300-8X
 3. Power on SKS8300-8X and interrupt by Ctrl + B
 4. Login to the vendor CLI by Ctrl + F and "diagshell_unipoe_env"
 5. Login to the U-Boot CLI by "debug_unish_env" command
 6. Enable Port1 with the following commands

    rtk 10g 0 fiber1g (or fiber10g if 10GBase-*R)
    rtk ext-devInit 0
    rtk ext-pinSet 2 0

    Note: the last command sets tx-disable to low

 7. Download initramfs image from TFTP server

    tftpboot 0x82000000 <image name>

 8. Boot with the downloaded image

    bootm

 9. On the initramfs image, backup the stock firmware if needed
10. Upload (or download) sysupgrade image to the device
11. Erase "firmware" partition to cleanup JFFS2 of stock FW

    mtd erase firmware

12. Perform sysupgrade with the sysupgrade image
13. Wait ~120 sec to complete flashing

Notes:

- A kernel binary "nos.img" needs to be stored into JFFS2 filesystem
  using 4KiB erase block instead of 64KiB.

- PT7A7514WE is handled by hardware-assited system LED output
  (blinking).

- Some Japanese users asked to XikeStor about maximum power limit of
  SFP+ ports and got approximate criteria:

  - per port       : <=  2.9 W
  - total (8 ports): <= 15.8 W

MAC addresses:

eth0   : 84:E5:D8:xx:xx:37 (board-info (stock:"flash_raw"), 0x218 (hex))
(ports): 84:E5:D8:xx:xx:36 (board-info (stock:"flash_raw"), 0x1f1 (hex))

Reverting to stock firmware:

1. Prepare OpenWrt SDK to use the mkfs.jffs2 tool contained in it

   Note: the official mkfs.jffs2 tool in mtd-utils doesn't support 4KiB
         erase size and not usable for SKS8300-8X

2. Create a directory for working
3. Download official firmware for SKS8300-8X from XikeStor's official
   website
4. Rename the downloaded firmware to "nos.img" and place it to the
   working directory
5. Create a JFFS2 filesystem binary with the working directory

   /path/to/mkfs.jffs2 -p -b -U -v -e 4KiB -x lzma \
       -o nos.img.jffs2 -d /path/to/working/dir/

6. Upload the created JFFS2 filesystem binary to the device
7. Erase the "firmware" partition

   mtd erase firmware

8. Write the JFFS2 filesystem binary to the "firmware" partition

   mtd write /path/to/nos.img.jffs2 firmware

9. After writing, reboot the device by power cycle

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17593
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2025-01-21 18:37:51 +01:00
.devcontainer/ci-env devcontainer: Add development environment for gihub codespace 2023-10-30 23:34:26 +01:00
.github CI: labeler: Add stm32 target 2024-11-24 22:51:14 +01:00
.vscode meta: VS Code: add "Git: Always Sign Off" setting 2024-10-03 17:18:51 +02:00
config netfilter: add kmod-nfnetlink-ct{helper,timeout} 2024-12-23 23:37:57 +01:00
include build: add additional parameter support to Build/jffs2 2025-01-21 18:37:51 +01:00
LICENSES LICENSES: include all used licenses in LICENSES directory 2021-02-14 19:21:38 +01:00
package kernel: add missing symbols for lxc 2025-01-21 00:10:12 +01:00
scripts qualcommax: ipq60xx: add TP-Link EAP610-Outdoor support 2025-01-12 16:54:51 +01:00
target realtek: add support for XikeStor SKS8300-8X 2025-01-21 18:37:51 +01:00
toolchain toolchain/binutils: remove old versions 2024-10-12 22:12:39 +02:00
tools tools: firmware-utils: update to Git HEAD (2024-01-14) 2025-01-21 18:37:51 +01:00
.gitattributes .gitattributes: ignore some whitespace "violations" in .patch files 2024-12-12 11:01:56 +01:00
.gitignore gitignore: ignore local APK keys 2024-05-17 22:03:06 +03:00
BSDmakefile build: use SPDX license tags 2021-02-05 14:54:47 +01:00
Config.in build: scripts/config - update to kconfig-v5.14 2022-02-19 13:10:01 +01:00
COPYING COPYING: add COPYING file to specify project licenses 2021-02-14 19:21:38 +01:00
feeds.conf.default feeds.conf.default: enable video feed by default 2024-12-05 01:34:01 +00:00
Makefile build: include tests/Makefile if available 2024-06-17 17:51:31 +02:00
README.md README: replace "MacOSX" with "macOS" 2024-04-01 18:46:30 +02:00
rules.mk build: use lazy evaluation for NPROC to speed up metadata dump 2025-01-14 14:04:53 +01:00

README.md

OpenWrt logo

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Download

Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.

If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.

An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:

Development

To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.7+ rsync subversion unzip which

Quickstart

  1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

  2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

  3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

  4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

Related Repositories

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

  • LuCI Web Interface: Modern and modular interface to control the device via a web browser.

  • OpenWrt Packages: Community repository of ported packages.

  • OpenWrt Routing: Packages specifically focused on (mesh) routing.

  • OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

  • Forum: For usage, projects, discussions and hardware advise.
  • Support Chat: Channel #openwrt on oftc.net.

Developer Community

License

OpenWrt is licensed under GPL-2.0