Adrian Schmutzler 2708d58c1d ramips: add label MAC address for Edimax RG21S ... The Edimax RG21S has a label which bears two MAC addresses: 2.4 GHz (n) and 5 GHz (n+1) The complete MAC address setup is as follows: 2.4 GHz *:83 factory 0x4, u-boot-env wlanaddr 5 GHz *:84 factory 0x8004 LAN *:83 u-boot-env ethaddr WAN *:85 u-boot-env wanaddr Since 2.4 GHz is the first address on the label and the same as used for ethernet, take this one for label MAC address. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>		2019-12-17 13:33:58 +01:00
..
base-files	ramips: split further base-files across subtargets	2019-11-11 14:53:06 +01:00
dts	ramips: increase SPI frequency for Edimax RG21S	2019-12-17 13:33:27 +01:00
files-4.14/drivers	ramips: ethernet: Replace random_ether_addr with eth_hw_addr_random	2019-10-27 14:13:47 +01:00
image	ramips: add support for JCG JHR-AC876M	2019-12-13 19:43:47 +01:00
mt76x8	ramips: mt76x8: use flash location for wan_mac in 02_network	2019-12-12 13:11:39 +01:00
mt7620	ramips: mt7620: use flash location for wan_mac in 02_network	2019-12-12 13:11:18 +01:00
mt7621	ramips: add label MAC address for Edimax RG21S	2019-12-17 13:33:58 +01:00
patches-4.14	kernel: bump 4.14 to 4.14.158	2019-12-10 09:50:42 +01:00
rt288x	ramips: rt288x: use flash location for wan_mac in 02_network	2019-12-12 13:11:49 +01:00
rt305x	ramips: rt305x: use flash location for wan_mac in 02_network	2019-12-12 13:11:58 +01:00
rt3883	ramips: improve Samsung CY-SWR1100 support	2019-11-13 16:03:42 +01:00
Makefile	ramips: switch to linux 4.14	2018-04-06 18:07:43 +02:00
modules.mk	kernel: Fix kmod-regmap split	2019-01-27 11:07:14 +01:00