ipq50xx: ad support for MikroTik SXTsq 5 ax

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>

include/image-commands.mk

@@ -492,7 +492,7 @@ define Build/yaffs-filesystem
 		filesystem_size="filesystem_blocks * 64 * 1024" \
 		filesystem_size_with_reserve="(filesystem_blocks + 2) * 64 * 1024"; \
 		head -c $$filesystem_size_with_reserve /dev/zero | tr "\000" "\377" > $@.img \
-		&& yafut -d $@.img -w -i $@ -o kernel -C 1040 -B 64k -E -P -S $(1) \
+		&& yafut -d $@.img -w -i $@ -o $(if $(findstring v7,$@),bootimage,kernel) -C 1040 -B 64k -E -P -S $(1) \
 		&& truncate -s $$filesystem_size $@.img \
 		&& mv $@.img $@
 endef
@@ -530,6 +530,11 @@ define Build/gl-qsdk-factory
 		$(KDIR_TMP)/$(notdir $(BOOT_SCRIPT))
 endef
 
+define Build/kernel-pack-npk
+	PYTHONPATH="$(STAGING_DIR_HOST)/share/npkpy" python $(STAGING_DIR_HOST)/share/npkpy/pack_npk_kernel.py --kernel $@ --output $@.npk
+	mv $@.npk $@
+endef
+
 define Build/linksys-image
 	let \
 		size="$$(stat -c%s $@)" \

scripts/flashing/mikrotik_ethboot.sh

@@ -0,0 +1,23 @@
+#!/bin/bash
+IFNAME=enp101s0f4u1
+IP="192.168.88.10"
+BOOTFILE="mikrotik.initramfs"
+
+/sbin/ip addr replace $IP/24 dev $IFNAME
+/sbin/ip link set dev $IFNAME up
+
+
+
+/usr/sbin/dnsmasq \
+--no-daemon \
+--listen-address $IP \
+--bind-interfaces \
+-p0 \
+--dhcp-authoritative \
+--dhcp-range=192.168.88.100,192.168.88.200 \
+--bootp-dynamic \
+--dhcp-boot=mikrotik.initramfs \
+--log-dhcp \
+--enable-tftp \
+--tftp-root=$(pwd)
+

target/linux/ath79/image/common-mikrotik.mk

@@ -13,6 +13,10 @@ define Device/mikrotik_nor
   IMAGE/sysupgrade.bin := append-kernel | yaffs-filesystem -M | \
 	pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
 	check-size | append-metadata
+  IMAGES += sysupgrade-v7.bin
+  IMAGE/sysupgrade-v7.bin := append-kernel | kernel-pack-npk | \
+	  yaffs-filesystem -M | pad-to $$$$(BLOCKSIZE) | \
+	  append-rootfs | pad-rootfs | check-size | append-metadata
 endef
 
 define Device/mikrotik_nand

target/linux/ipq40xx/image/mikrotik.mk

@@ -5,9 +5,13 @@ define Device/mikrotik_nor
 	KERNEL_NAME := vmlinux
 	KERNEL := kernel-bin | append-dtb-elf
 	IMAGES = sysupgrade.bin
+	IMAGES += sysupgrade-v7.bin
 	IMAGE/sysupgrade.bin := append-kernel | yaffs-filesystem -L | \
 		pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
 		check-size | append-metadata
+	IMAGE/sysupgrade-v7.bin := append-kernel | kernel-pack-npk | \
+		yaffs-filesystem -L | pad-to $$$$(BLOCKSIZE) | \
+		append-rootfs | pad-rootfs | check-size | append-metadata
 endef
 
 define Device/mikrotik_nand

target/linux/qualcommax/Makefile

@@ -3,8 +3,8 @@ include $(TOPDIR)/rules.mk
 ARCH:=aarch64
 BOARD:=qualcommax
 BOARDNAME:=Qualcomm Atheros 802.11ax WiSoC-s
-FEATURES:=squashfs ramdisk fpu nand rtc emmc
-KERNELNAME:=Image
+FEATURES:=squashfs ramdisk fpu nand rtc emmc minor 
+KERNELNAME:=vmlinux
 CPU_TYPE:=cortex-a53
 SUBTARGETS:=ipq807x ipq60xx ipq50xx
 

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-sxtsq-5-ax.dts

@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq5018.dtsi"
+#include "ipq5018-ess.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "MikroTik SXTsq 5 ax";
+	compatible = "mikrotik,sxtsq-5-ax", "qcom,ipq5018";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		bootargs-append = " netconsole=@/,@10.0.0.2/";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		led_user: user {
+			gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led_power: power {
+			gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_POWER;
+			panic-indicator;
+		};
+
+		led_eth {
+			gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+		};
+		rssilow {
+			label = "green:rssilow";
+			gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		rssimediumlow {
+			label = "green:rssimediumlow";
+			gpios = <&tlmm 19 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		rssimedium {
+			label = "green:rssimedium";
+			gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		rssimediumhigh {
+			label = "green:rssimediumhigh";
+			gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		rssihigh {
+			label = "green:rssihigh";
+			gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+	};
+
+	reserved-memory {
+		q6_mem_regions: q6_mem_regions@4b000000 {
+			no-map;
+			reg = <0x0 0x4b000000 0x0 0x3000000>;
+			status = "disabled";
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
+
+&crypto {
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&prng {
+	status = "okay";
+};
+
+&qfprom {
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&tlmm {
+	led_pins: led-pins {
+		pins = "gpio46", "gpio20", "gpio30", "gpio17",
+		       "gpio19", "gpio25", "gpio26", "gpio34";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+};
+
+&switch {
+	status = "okay";
+
+	switch_mac_mode = <MAC_MODE_SGMII_CHANNEL0>;
+
+	qcom,port_phyinfo {
+		port@0 {
+			port_id = <1>;
+			mdiobus = <&mdio0>;
+			phy_address = <7>;
+		};
+
+	};
+};
+
+&mdio0 {
+	status = "okay";
+};
+
+&tsens {
+	status = "okay";
+};
+

target/linux/qualcommax/image/ipq50xx.mk

@@ -36,6 +36,26 @@ define Device/elecom_wrc-x3000gs2
 endef
 TARGET_DEVICES += elecom_wrc-x3000gs2
 
+define Device/mikrotik_nor
+	DEVICE_VENDOR := MikroTik
+	BLOCKSIZE := 64k
+	KERNEL_NAME := vmlinux.elf
+	KERNEL_INITRAMFS_NAME = vmlinux-initramfs.elf
+	KERNEL := kernel-bin
+	IMAGES = sysupgrade-v7.bin
+	IMAGE/sysupgrade-v7.bin := append-kernel | kernel-pack-npk | \
+		yaffs-filesystem -L | pad-to $$$$(BLOCKSIZE) | \
+		append-rootfs | pad-rootfs | check-size | append-metadata
+endef
+
+define Device/mikrotik_sxtsq-5-ax
+	$(call Device/mikrotik_nor)
+	DEVICE_VENDOR := MikroTik
+	DEVICE_MODEL := SXTsq 5 ax
+	SOC := ipq5018
+endef
+TARGET_DEVICES += mikrotik_sxtsq-5-ax
+
 define Device/glinet_gl-b3000
 	$(call Device/FitImage)
 	DEVICE_VENDOR := GL.iNet

target/linux/qualcommax/ipq50xx/target.mk

@@ -1,6 +1,7 @@
 SUBTARGET:=ipq50xx
 BOARDNAME:=Qualcomm Atheros IPQ50xx
 DEFAULT_PACKAGES += ath11k-firmware-ipq5018
+IMAGES_DIR:=compressed
 
 define Target/Description
 	Build firmware images for Qualcomm Atheros IPQ50xx based boards.

target/linux/ramips/image/mt7621.mk

@@ -223,6 +223,7 @@ endef
 define Build/zytrx-header
 	$(eval board=$(word 1,$(1)))
 	$(eval version=$(word 2,$(1)))
+	$(eval version=$(shell echo $(version) | cut -c 1-31))
 	$(STAGING_DIR_HOST)/bin/zytrx -B '$(board)' -v '$(version)' -i $@ -o $@.new
 	mv $@.new $@
 endef
@@ -2091,9 +2092,16 @@ define Device/MikroTik
   DEVICE_PACKAGES := kmod-usb3 -uboot-envtools
   KERNEL_NAME := vmlinuz
   KERNEL := kernel-bin | append-dtb-elf
+  LOADER_TYPE := elf
+  KERNEL_INITRAMFS_NAME := vmlinux-initramfs
+  KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel
   IMAGE/sysupgrade.bin := append-kernel | yaffs-filesystem -L | \
 	pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | \
 	append-metadata
+  IMAGES += sysupgrade-v7.bin
+  IMAGE/sysupgrade-v7.bin := append-kernel | kernel-pack-npk | \
+	  yaffs-filesystem -L | pad-to $$$$(BLOCKSIZE) | \
+	  append-rootfs | pad-rootfs | check-size | append-metadata
 endef
 
 define Device/mikrotik_ltap-2hnd

tools/Makefile

@@ -87,6 +87,7 @@ tools-$(if $(CONFIG_BUILD_ALL_HOST_TOOLS)$(CONFIG_USES_MINOR),y) += yafut
 tools-$(if $(CONFIG_BUILD_ALL_HOST_TOOLS)$(CONFIG_USE_SPARSE),y) += sparse
 tools-$(if $(CONFIG_BUILD_ALL_HOST_TOOLS)$(CONFIG_USE_LLVM_BUILD),y) += llvm-bpf
 tools-$(if $(CONFIG_BUILD_ALL_HOST_TOOLS)$(CONFIG_USE_MOLD),y) += mold
+tools-$(if $(CONFIG_BUILD_ALL_HOST_TOOLS)$(CONFIG_USES_MINOR),y) += npkpy
 
 # builddir dependencies
 $(curdir)/autoconf/compile := $(curdir)/m4/compile

tools/npkpy/Makefile

@@ -0,0 +1,33 @@
+#
+# Copyright (C) 2023 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=npkpy
+PKG_RELEASE:=1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/john-tho/npkpy.git
+PKG_SOURCE_DATE:=2023-01-22
+PKG_SOURCE_VERSION:=771dddc5aaaff95a9b4160d6867152cfa1a9255f
+PKG_MIRROR_HASH:=430375e34117f39cd557025ca7ea84cfad9ac209ee911f3c41f2a5c22f77b886
+
+include $(INCLUDE_DIR)/host-build.mk
+
+define Host/Compile
+endef
+
+define Host/Install
+	mkdir -p $(STAGING_DIR_HOST)/share/npkpy
+	$(CP) $(HOST_BUILD_DIR)/npkpy $(STAGING_DIR_HOST)/share/npkpy/
+	$(CP) $(HOST_BUILD_DIR)/tools/demo_pack_kernel/poc_pack_kernel.py $(STAGING_DIR_HOST)/share/npkpy/pack_npk_kernel.py
+endef
+
+define Host/Clean
+	rm -rf $(STAGING_DIR_HOST)/share/npkpy
+endef
+
+$(eval $(call HostBuild))