d3be5474f6e6 udebug-cli: ignore zero-length messages in logstream
c79f02d899df ucode: fix skipping lines where the timestamp cannot be parsed
5327524e7153 cmake: bump minimum required version to 3.13
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Right now the sha256sums are only created for the targets/ folder (i.e.
firmware images) and only the buildbot generates those sha256sums. Instead, let
the build system create the sha256sums directly.
Signed-off-by: Paul Spooren <mail@aparcar.org>
The mlxreg-hotplug platform driver was failing to probe due to a missing
I²C multiplexer dependency. Previously, only kmod-i2c-mux-mlxcpld was
declared, but mlxreg also requires kmod-i2c-mux-reg to initialize its
I²C mux functionality.
Without this dependency, the driver probe was deferred:
[ 24.902331] platform mlxreg-hotplug: deferred probe pending: (reason unknown)
With kmod-i2c-mux-reg added, the probe succeeds and the expected
multiplexed I²C buses are registered:
[ 15.793884] i2c i2c-1: Added multiplexed i2c bus 2
[ 15.799391] i2c i2c-1: Added multiplexed i2c bus 3
[ 15.804830] i2c i2c-1: Added multiplexed i2c bus 4
...
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://github.com/openwrt/openwrt/pull/20274
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add support for the Radxa ROCK 4D board.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/20041
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Currently there's no usable open source TPL implementation for
rk3576 SoCs, so pack the prebuilt firmware from the vendor.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/20041
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
When a phy appears after setup has already been attempted, tell netifd
to retry setup for all failed wireless devices.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This can be used by other services to trigger reconfiguration, or detect when
PHY renaming has been performed.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ensures that renaming is handled properly. For disabled radios, setup is
performed with an empty list of interfaces.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
If there is used $(PKG_NAME) in PKG_SOURCE_URL,
then it can not be copy&pasted to the browser's address bar.
Let's remove $(PKG_NAME) and use hardcoded project name
in the PKG_SOURCE_URL
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20193
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
c3bf8fd913a4 interface: fix reload for devices that point to vlan aliases
22216cac7c94 bridge: fix reload when ports refer to aliased vlans on another bridge
ecca21ca07dd system: add logging wrappers for basic system functions
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The u-boot of cmcc_rax3000m_*-ddr3 declares a dependency on
trusted-firmware-a-mt7981-*-ddr3-1866mhz, while actually packages
the normal BL2. This causes build failure if the the non-1866m
variant isn't built.
According to the previous commit, it's intended to use the lower
frequency variant to fix device stability issues. Correct
BL2_DDRTYPE as intended.
Fixes: 028050da69 ("mediatek: CMCC RAX3000Me: fix stability issues")
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Fix a typo on defining the PHY package kmod description that reference
phy-aeonsemi-as21x1x package instead of phy-aeonsemi-as21xxx.
Fixes: 08a616b216 ("generic: backport support for Aeonsemi AS21xxx PHY")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Do not allow hostapd phy state update to bring up links as long between mld_set
and mld_start calls. Configuration on other PHYs could still be pending.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Bring up AP interfaces, even if no frequency update was provided.
Fixes bringup when a MLO STA on the same radios connects to fewer links
than available, or to a non-MLD AP.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Make the package empty if ucode wifi scripts are being used (since iwinfo is
provided by wifi-scripts in that case). This fixes packages that explicitly
select iwinfo
Signed-off-by: Felix Fietkau <nbd@nbd.name>
There are no supported drivers where it even makes sense to disable WMM
anymore, since so much depends on it.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
gpio pwm driver is only available on kernel 6.11+.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/20187
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fix typo in patch file suffix.
Signed-off-by: Wei-Ting Yang <williamatcg@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20178
Signed-off-by: Robert Marko <robimarko@gmail.com>
