diff --git a/target/linux/mediatek/dts/mt7981b-keenetic-kap-630.dts b/target/linux/mediatek/dts/mt7981b-keenetic-kap-630.dts new file mode 100644 index 0000000000..25357e9a8b --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-keenetic-kap-630.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +#include "mt7981b-keenetic-kap-630.dtsi" + +/ { + model = "Keenetic KAP-630"; + compatible = "keenetic,kap-630", "mediatek,mt7981"; +}; diff --git a/target/linux/mediatek/dts/mt7981b-keenetic-kap-630.dtsi b/target/linux/mediatek/dts/mt7981b-keenetic-kap-630.dtsi new file mode 100644 index 0000000000..35fa54a284 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-keenetic-kap-630.dtsi @@ -0,0 +1,245 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +/dts-v1/; +#include "mt7981b.dtsi" + +/ { + aliases { + label-mac-device = &gmac0; + led-boot = &status_led_green; + led-failsafe = &status_led_orange; + led-running = &status_led_green; + led-upgrade = &status_led_green; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-reset { + label = "reset"; + linux,code = ; + gpios = <&pio 24 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + status_led_green: led-0 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 11 GPIO_ACTIVE_HIGH>; + }; + + status_led_orange: led-1 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 12 GPIO_ACTIVE_HIGH>; + }; + }; + + virtual_flash { + compatible = "mtd-concat"; + devices = <&firmware1 &firmware2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x600000>; + }; + + partition@400000 { + label = "ubi"; + reg = <0x600000 0x0>; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +ð { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + phy-handle = <&phy10>; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_a>; + }; +}; + +&mdio_bus { + /* Airoha EN8811H */ + phy10: ethernet-phy@a { + reg = <0xa>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pio 22 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <20000>; + }; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + + /* Winbond W25N01GVZEIG (128M) */ + spi_nand@0 { + compatible = "spi-nand"; + reg = <0>; + + spi-max-frequency = <52000000>; + spi-tx-buswidth = <4>; + spi-rx-buswidth = <4>; + + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* bl2 */ + partition@0 { + label = "preloader"; + reg = <0x0 0x80000>; + read-only; + }; + + /* fip */ + partition@80000 { + label = "u-boot"; + reg = <0x80000 0x200000>; + read-only; + }; + + partition@280000 { + label = "u-config"; + reg = <0x280000 0x80000>; + read-only; + }; + + partition@300000 { + label = "rf-eeprom"; + reg = <0x300000 0x200000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + + macaddr_factory_a: macaddr@a { + reg = <0xa 0x6>; + }; + }; + }; + + firmware1: partition@500000 { + label = "firmware_1"; + reg = <0x500000 0x3500000>; + }; + + partition@3a00000 { + label = "config_1"; + reg = <0x3a00000 0x80000>; + read-only; + }; + + partition@3a80000 { + label = "dump"; + reg = <0x3a80000 0x80000>; + read-only; + }; + + partition@3c00000 { + label = "u-state"; + reg = <0x3c00000 0x20000>; + read-only; + }; + + partition@3e80000 { + label = "u-config_res"; + reg = <0x3e80000 0x80000>; + read-only; + }; + + partition@3f00000 { + label = "rf-eeprom_res"; + reg = <0x3f00000 0x200000>; + read-only; + }; + + firmware2: partition@4100000 { + label = "firmware_2"; + reg = <0x4140000 0x3500000>; + }; + + partition@7600000 { + label = "config_2"; + reg = <0x7600000 0x80000>; + read-only; + }; + }; + }; +}; + +&wifi { + nvmem-cell-names = "eeprom"; + nvmem-cells = <&eeprom_factory_0>; + status = "okay"; +}; + +&sgmiisys0 { + /delete-node/ mediatek,pnswap; +}; diff --git a/target/linux/mediatek/dts/mt7981b-netcraze-nap-630.dts b/target/linux/mediatek/dts/mt7981b-netcraze-nap-630.dts new file mode 100644 index 0000000000..81b0b51707 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-netcraze-nap-630.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +#include "mt7981b-keenetic-kap-630.dtsi" + +/ { + model = "Netcraze NAP-630"; + compatible = "netcraze,nap-630", "mediatek,mt7981"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 9cdb56bc6a..69e403f937 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -110,6 +110,8 @@ mediatek_setup_interfaces() cudy,ap3000-v1|\ cudy,re3000-v1|\ kebidumei,ax3000-u22|\ + keenetic,kap-630|\ + netcraze,nap-630|\ netgear,eax17|\ netgear,wax220|\ openfi,6c|\ diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index ea31a60308..5950a590a8 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -153,9 +153,11 @@ case "$board" in jdcloud,re-cp-03) [ "$PHYNBR" = "1" ] && mmc_get_mac_binary factory 0xa > /sys${DEVPATH}/macaddress ;; + keenetic,kap-630|\ keenetic,kn-3711|\ keenetic,kn-3811|\ - keenetic,kn-3911) + keenetic,kn-3911|\ + netcraze,nap-630) [ "$PHYNBR" = "1" ] && \ macaddr_setbit_la "$(mtd_get_mac_binary rf-eeprom 0x4)" > /sys${DEVPATH}/macaddress ;; diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 4758b238d1..283ee32536 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -1785,6 +1785,32 @@ define Device/kebidumei_ax3000-u22 endef TARGET_DEVICES += kebidumei_ax3000-u22 +define Device/keenetic_kap-630-common + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware \ + kmod-phy-airoha-en8811h + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL_SIZE := 6144k + IMAGE_SIZE := 108544k + KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \ + append-squashfs4-fakeroot + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + IMAGES += factory.bin + IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \ + append-ubi | check-size | zyimage -d $$(ZYIMAGE_ID) -v "$$(DEVICE_MODEL)" +endef + +define Device/keenetic_kap-630 + DEVICE_VENDOR := Keenetic + DEVICE_MODEL := KAP-630 + DEVICE_DTS := mt7981b-keenetic-kap-630 + ZYIMAGE_ID := 0x810630 + $(call Device/keenetic_kap-630-common) +endef +TARGET_DEVICES += keenetic_kap-630 + define Device/keenetic_kn-1812-common DEVICE_DTS_DIR := ../dts DEVICE_PACKAGES := kmod-mt7992-firmware kmod-usb3 \ @@ -2228,6 +2254,15 @@ define Device/netcore_n60-pro endef TARGET_DEVICES += netcore_n60-pro +define Device/netcraze_nap-630 + DEVICE_VENDOR := Netcraze + DEVICE_MODEL := NAP-630 + DEVICE_DTS := mt7981b-netcraze-nap-630 + ZYIMAGE_ID := 0xC10630 + $(call Device/keenetic_kap-630-common) +endef +TARGET_DEVICES += netcraze_nap-630 + define Device/netcraze_nc-1812 DEVICE_VENDOR := Netcraze DEVICE_MODEL := NC-1812